[PATCH v9 00/11] Genericize DW MIPI DSI bridge and add i.MX 6 driver
Ezequiel Garcia
ezequiel at collabora.com
Sat Aug 15 09:05:00 EDT 2020
Hi Neil,
On Wed, 2020-07-01 at 09:35 +0300, Adrian Ratiu wrote:
> Hi Neil,
>
> On Mon, 29 Jun 2020, Neil Armstrong <narmstrong at baylibre.com>
> wrote:
> > Hi Adrian,
> >
> > On 09/06/2020 19:49, Adrian Ratiu wrote:
> > > [Re-submitting to cc dri-devel, sorry about the noise] Hello
> > > all, v9 cleanly applies on top of latest next-20200609 tree.
> > > v9 does not depend on other patches as the last binding doc has
> > > been merged. All feedback up to this point has been
> > > addressed. Specific details in individual patch changelogs.
> > > The biggest changes are the deprecation of the Synopsys DW
> > > bridge bind() API in favor of of_drm_find_bridge() and .attach
> > > callbacks, the addition of a TODO entry which outlines future
> > > planned bridge driver refactorings and a reordering of some
> > > i.MX 6 patches to appease checkpatch. The idea behind the
> > > TODO is to get this regmap and i.MX 6 driver merged and then do
> > > the rest of refactorings in-tree because it's easier and the
> > > refactorings themselves are out-of-scope of this series which
> > > is adding i.MX 6 support and is quite big already, so please,
> > > if there are more refactoring ideas, let's add them to the TODO
> > > doc. :) I intend to tackle those after this series is merged to
> > > avoid two complex inter-dependent simultaneous series.
> >
> > This has been around here for a long time and you seem to have
> > addressed all the reviews.
> >
> > > As always more testing is welcome especially on Rockchip and
> > > STM SoCs.
> >
> > It has been tested on STM, but I'd like a feedback on RK
> > platform before applying the bridge parts.
> >
> > Can the imx & stm patches be applied separately ?
> >
>
> Yes the IMX and STM patches can be applied separately, they just
> both depend on the common regmap patches.
>
It's been a month so I think it's a good idea to go forward
applying IMX and STM patches (probably with the usual
rebase dance).
As for Rockchip...
> The binding API removal change which directly touches RK can also
> be applied separately, but unfortunately I do not have access to a
> RK board with a DSI display to test it (or the bridge regmap logic
> on RK btw...), I just "eye-balled" the RK code based on the public
> docs and it LGTM.
>
... I'll be getting some DSI hardware to help with the pending
Rockchip issues, so we can tackle Rockchip as well. I'm quite sure
we'll loop Heiko as well if needed :-)
Cheers,
Ezequiel
> > Neil
> >
> > > Big thank you to everyone who has contributed to this up to now,
> > > Adrian
> > >
> > > Adrian Ratiu (11):
> > > drm: bridge: dw_mipi_dsi: add initial regmap infrastructure
> > > drm: bridge: dw_mipi_dsi: abstract register access using reg_fields
> > > drm: bridge: dw_mipi_dsi: add dsi v1.01 support
> > > drm: bridge: dw_mipi_dsi: remove bind/unbind API
> > > dt-bindings: display: add i.MX6 MIPI DSI host controller doc
> > > ARM: dts: imx6qdl: add missing mipi dsi properties
> > > drm: imx: Add i.MX 6 MIPI DSI host platform driver
> > > drm: stm: dw-mipi-dsi: let the bridge handle the HW version check
> > > drm: bridge: dw-mipi-dsi: split low power cfg register into fields
> > > drm: bridge: dw-mipi-dsi: fix bad register field offsets
> > > Documentation: gpu: todo: Add dw-mipi-dsi consolidation plan
> > >
> > > .../display/imx/fsl,mipi-dsi-imx6.yaml | 112 +++
> > > Documentation/gpu/todo.rst | 25 +
> > > arch/arm/boot/dts/imx6qdl.dtsi | 8 +
> > > drivers/gpu/drm/bridge/synopsys/Kconfig | 1 +
> > > drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 713 ++++++++++++------
> > > drivers/gpu/drm/imx/Kconfig | 8 +
> > > drivers/gpu/drm/imx/Makefile | 1 +
> > > drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c | 399 ++++++++++
> > > .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 7 +-
> > > drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 16 +-
> > > 10 files changed, 1059 insertions(+), 231 deletions(-)
> > > create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
> > > create mode 100644 drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c
> > >
More information about the Linux-rockchip
mailing list