[PATCH v3 3/3] arm64: dts: rockchip: add rk3318 A95X Z2 board
Johan Jonker
jbx6244 at gmail.com
Sat Aug 8 12:06:18 EDT 2020
The rk3318 A95X Z2 boards are sold as TV box.
No further documentation is given, but from the dts files
extracted it seems that the rk3318 processor is simulair
to the rk3328. This dts file contains only the basic nodes
that have support in the mainline kernel.
Features:
CPU: RK3318 Quad-Core Cortex-A53
GPU: Mali-450
RAM: 2/4GB DDR3
ROM: EMMC 16/32/64GB
HDMI: HDMI 2.0a for 4k at 60Hz
Ethernet: 10/100M standard RJ-45
WiFi: 2.4G+5G WIFI, 802.11 b/g/n
Bluetooth: 4.0
1 x USB 3.0
1 x USB 2.0
1 x Micro SD card slot
1 x SPDIF
1 x AV
1 x DC IN
Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts | 374 ++++++++++++++++++++++++
2 files changed, 375 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index b87b1f773..aa508bc4a 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -2,6 +2,7 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
new file mode 100644
index 000000000..30c73ef25
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3328.dtsi"
+
+/ {
+ model = "A95X Z2";
+ compatible = "zkmagic,a95x-z2", "rockchip,rk3318";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ recovery {
+ label = "recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <17000>;
+ };
+ };
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&ir_int>;
+ pinctrl-names = "default";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&cyx_led_pin>;
+ pinctrl-names = "default";
+
+ cyx_led: led-0 {
+ default-state = "on";
+ gpios = <&gpio2 RK_PC7 GPIO_ACTIVE_LOW>;
+ label = "CYX_LED";
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-0 = <&wifi_enable_h>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+
+ spdif-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "SPDIF";
+
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ /* Power tree */
+ vccio_1v8: vccio-1v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vccio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vccio_3v3: vccio-3v3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vccio_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcc_otg_vbus: otg-vbus-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&otg_vbus_drv>;
+ pinctrl-names = "default";
+ regulator-name = "vcc_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&sdmmc0m1_pin>;
+ pinctrl-names = "default";
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vccio_3v3>;
+ };
+
+ vdd_arm: vdd-arm {
+ compatible = "pwm-regulator";
+ pwms = <&pwm0 0 5000 1>;
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-settling-time-up-us = <250>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 0 5000 1>;
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-settling-time-up-us = <250>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&analog_sound {
+ status = "okay";
+};
+
+&codec {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu0_opp_table {
+ opp-1200000000 {
+ status = "disabled";
+ };
+
+ opp-1296000000 {
+ status = "disabled";
+ };
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ non-removable;
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&gmac2phy {
+ assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
+ assigned-clock-rate = <50000000>;
+ assigned-clocks = <&cru SCLK_MAC2PHY>;
+ clock_in_out = "output";
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_log>;
+};
+
+&hdmi {
+ ddc-i2c-scl-high-time-ns = <9625>;
+ ddc-i2c-scl-low-time-ns = <10000>;
+ status = "okay";
+};
+
+&hdmiphy {
+ status = "okay";
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&i2s1 {
+ status = "okay";
+};
+
+&io_domains {
+ pmuio-supply = <&vccio_3v3>;
+ vccio1-supply = <&vccio_3v3>;
+ vccio2-supply = <&vccio_1v8>;
+ vccio3-supply = <&vccio_3v3>;
+ vccio4-supply = <&vccio_1v8>;
+ vccio5-supply = <&vccio_3v3>;
+ vccio6-supply = <&vccio_3v3>;
+ status = "okay";
+};
+
+&pinctrl {
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ cyx_led_pin: cyx-led-pin {
+ rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pwm0 {
+ pwm0_pin_pull_up: pwm0-pin-pull-up {
+ rockchip,pins = <2 RK_PA4 1 &pcfg_pull_up>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin_pull_up: pwm1-pin-pull-up {
+ rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc1 {
+ clk_32k_out: clk-32k-out {
+ rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ pinctrl-0 = <&pwm0_pin_pull_up>;
+ pinctrl-names = "active";
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-0 = <&pwm1_pin_pull_up>;
+ pinctrl-names = "active";
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vccio_1v8>;
+ status = "okay";
+};
+
+&sdio {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ max-frequency = <125000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &clk_32k_out>;
+ pinctrl-names = "default";
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+ pinctrl-names = "default";
+ vmmc-supply = <&vcc_sd>;
+ status = "okay";
+};
+
+&spdif {
+ pinctrl-0 = <&spdifm0_tx>;
+ status = "okay";
+};
+
+&soc_crit {
+ temperature = <115000>; /* millicelsius */
+};
+
+&target {
+ temperature = <105000>; /* millicelsius */
+};
+
+&threshold {
+ temperature = <90000>; /* millicelsius */
+};
+
+&tsadc {
+ rockchip,hw-tshut-temp = <120000>;
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+};
+
+&u2phy_host {
+ status = "okay";
+};
+
+&u2phy_otg {
+ phy-supply = <&vcc_otg_vbus>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb20_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
--
2.11.0
More information about the Linux-rockchip
mailing list