[PATCH] arm64: dts: rockchip: add SPDIF node for rk3399-rockpro64

[Johan Jonker]

Hi Katsuhiro,

On 8/1/20 7:49 PM, Katsuhiro Suzuki wrote:
> This patch adds 'disabled' SPDIF sound node and related settings
> for rk3399-rockpro64.
> 
> There are 2 reasons:
>   - All RK3399 dma-bus channels have been already used by I2S0/1/2
>   - RockPro64 does not have SPDIF optical nor coaxial connector,
>     just have 3pins
> 
> Signed-off-by: Katsuhiro Suzuki <katsuhiro at katsuster.net>
> ---
>  .../boot/dts/rockchip/rk3399-rockpro64.dtsi   | 28 +++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> index 6e553ff47534..e35b30f8a46e 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> @@ -76,6 +76,23 @@ sound {
>  		dais = <&i2s1_p0>;
>  	};
>  
> +	sound-dit {
> +		compatible = "audio-graph-card";
> +		label = "rockchip,rk3399";
> +		dais = <&spdif_p0>;
> +	};
> +
> +	spdif-dit {
> +		compatible = "linux,spdif-dit";
> +		#sound-dai-cells = <0>;
> +
> +		port {
> +			dit_p0_0: endpoint {
> +				remote-endpoint = <&spdif_p0_0>;
> +			};
> +		};
> +	};
> +
>  	vcc12v_dcin: vcc12v-dcin {
>  		compatible = "regulator-fixed";
>  		regulator-name = "vcc12v_dcin";
> @@ -698,6 +715,17 @@ &sdhci {
>  	status = "okay";
>  };
>  
> +&spdif {
> +	pinctrl-0 = <&spdif_bus_1>;

> +	status = "disabled";

The status is already disabled.
Adding more unused nodes and properties doesn't make sense here.

	spdif: spdif at ff870000 {
		compatible = "rockchip,rk3399-spdif";
		reg = <0x0 0xff870000 0x0 0x1000>;
		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
		dmas = <&dmac_bus 7>;
		dma-names = "tx";
		clock-names = "mclk", "hclk";
		clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
		pinctrl-names = "default";
		pinctrl-0 = <&spdif_bus>;
		power-domains = <&power RK3399_PD_SDIOAUDIO>;
		#sound-dai-cells = <0>;
		status = "disabled";
	};

> +
> +	spdif_p0: port {
> +		spdif_p0_0: endpoint {
> +			remote-endpoint = <&dit_p0_0>;
> +		};
> +	};
> +};
> +
>  &spi1 {
>  	status = "okay";
>  
>