[PATCH] PM / AVS: rockchip-io: add io selectors and supplies for PX30

[Heiko Stuebner]

Hi David,

looks good overall, some small things below.

Am Dienstag, 15. Mai 2018, 11:23:37 CEST schrieb David Wu:
> This adds the necessary data for handling io voltage domains on PX30.
> As interesting tidbit, the PX30 contains two separate iodomain areas.
> One in the regular General Register Files (GRF) and one in PMUGRF in the
> pmu power domain.
> 
> Signed-off-by: David Wu <david.wu at rock-chips.com>
> ---
>  .../bindings/power/rockchip-io-domain.txt          |  2 +
>  drivers/power/avs/rockchip-io-domain.c             | 68 ++++++++++++++++++++++
>  2 files changed, 70 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
> index 4a4766e..c2595ba 100644
> --- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
> +++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
> @@ -31,6 +31,8 @@ SoC is on the same page.
>  
>  Required properties:
>  - compatible: should be one of:
> +  - "rockchip,px30-io-voltage-domain" for px30
> +  - "rockchip,px30-pmu-io-voltage-domain" for px30 pmu-domains
>    - "rockchip,rk3188-io-voltage-domain" for rk3188
>    - "rockchip,rk3228-io-voltage-domain" for rk3228
>    - "rockchip,rk3288-io-voltage-domain" for rk3288

please also define the px30-specific supply names as can be seen in that
file for the other socs.

Also, please include devicetree maintainers, when modifying
binding documents.


> +static const struct rockchip_iodomain_soc_data soc_data_px30 = {
> +	.grf_offset = 0x180,
> +	.supply_names = {
> +		NULL,
> +		"vccio6",
> +		"vccio1",
> +		"vccio2",
> +		"vccio3",
> +		"vccio4",
> +		"vccio5",
> +		"vccio_oscgpi",

vccio-oscgpi ... aka with a "-" instead of "_"

With the above fixed
Reviewed-by: Heiko Stuebner <heiko at sntech.de>


Thanks
Heiko