[RESEND PATCH v6 4/5] ARM: dts: rockchip: set PWM delay backlight settings for Veyron.
Enric Balletbo i Serra
enric.balletbo at collabora.com
Wed Mar 28 10:03:26 PDT 2018
For veyron the binding should provide both PWM timings, the delay between
you enable the PWM and set the enable signal, and the delay between you
disable the PWM signal and clear the enable signal. Update the binding
accordingly, in this case the panels connected to the veyron boards have
a symmetric power sequence, hence the same value is used.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
Acked-by: Pavel Machek <pavel at ucw.cz>
Changes since v5:
Changes since v4:
- Rebased on top of mainline.
Changes since v3:
- Use new -ms names for proprieties.
Changes since v2:
- Use new names for proprieties.
Changes since v1:
- Add this new patch to fix current binding on veyron.
arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index d752a315f884..5a8c7f3abb38 100644
@@ -96,7 +96,8 @@
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
pwms = <&pwm0 0 1000000 0>;
- pwm-delay-us = <10000>;
+ post-pwm-on-delay-ms = <10>;
+ pwm-off-delay-ms = <10>;
More information about the Linux-rockchip