[PATCH 1/2] dt-bindings: analogix-dp: Add backlight-pwm-passthru

[Laurent Pinchart]

Hello,

On Sunday, 18 March 2018 14:52:45 EET Rob Herring wrote:
> On Fri, Mar 16, 2018 at 02:56:09PM +0530, Archit Taneja wrote:
> > On Friday 16 March 2018 08:26 AM, Alexandru M Stan wrote:
> > > Documentation for the optional backlight-pwm-passthru property.
> > > Tells the EDP panel to folow the input pwm frequency instead
> > 
> > s/folow/follow
> > 
> > It would be nice if we could add the details you mentioned in
> > patch #0 in either this or the next patch.
> > 
> > > of generating its own.
> > 
> > This is one of those bindings which is more a knob than a HW property,
> > but I can't think of any easy way to figure this out in SW. So, I guess
> > it's okay to have.
> > 
> > One thing I was wondering about was whether this prop should belong to
> > the eDP controller or the eDP panel. I don't have any strong opinion
> > about it, though.
> 
> Seems to me, it should be the panel. It's a setting in the panel, right?

As this aims at fixing an issue with the panel, I agree it should be a panel 
property.

Stupid question (I'm not too familiar with eDP panels), couldn't we set 
EDP_BACKLIGHT_FREQ_PWM_PIN_PASSTHRU unconditionally ?

> Is this generic to DP panels or something specific to a certain panel?
> The naming (vendor prefix or not) and doc location should match
> whatever the answer to that is.
> 
> > Reviewed-by: Archit Taneja <architt at codeaurora.org>
> > 
> > Thanks,
> > Archit
> > 
> > > Signed-off-by: Alexandru M Stan <amstan at chromium.org>
> > > ---
> > > 
> > >   Documentation/devicetree/bindings/display/bridge/analogix_dp.txt | 4
> > >   ++++
> > >   1 file changed, 4 insertions(+)
> > > 
> > > diff --git
> > > a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> > > b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> > > index 0c7473dd0e51..3c15242f6ce3 100644
> > > --- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> > > +++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> > > 
> > > @@ -23,6 +23,10 @@ Required properties for dp-controller:
> > >   		from general PHY binding: Should be "dp".
> > >   
> > >   Optional properties for dp-controller:
> > > +	-backlight-pwm-passthru:
> > > +		Directly pass the PWM frequency applied to the BL_PWM_DIM
> > > +		pin to the backlight current source. Done via
> > > +		EDP_BACKLIGHT_MODE_SET_REGISTER on DPCD.
> > > 
> > >   	-force-hpd:
> > >   		Indicate driver need force hpd when hpd detect failed, this
> > >   		is used for some eDP screen which don't have hpd signal.

-- 
Regards,

Laurent Pinchart