[PATCH v5 20/36] drm/bridge: analogix_dp: Don't use ANALOGIX_DP_PLL_CTL to control pll

[Archit Taneja]

On Saturday 10 March 2018 03:53 AM, Enric Balletbo i Serra wrote:
> From: zain wang <wzz at rock-chips.com>
> 
> There is no register named ANALOGIX_DP_PLL_CTL in Rockchip edp phy reg
> list.  We should use BIT_4 in ANALOGIX_DP_PD to control the pll power
> instead of ANALOGIX_DP_PLL_CTL.
> 

Reviewed-by: Archit Taneja <architt at codeaurora.org>

Thanks,
Archit

> Cc: Douglas Anderson <dianders at chromium.org>
> Signed-off-by: zain wang <wzz at rock-chips.com>
> Signed-off-by: Sean Paul <seanpaul at chromium.org>
> Signed-off-by: Thierry Escande <thierry.escande at collabora.com>
> Reviewed-by: Andrzej Hajda <a.hajda at samsung.com>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
> Tested-by: Marek Szyprowski <m.szyprowski at samsung.com>
> ---
> 
>   drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 20 ++++++++++++--------
>   1 file changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> index 7b7fd227e1f9..02ab1aaa9993 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> @@ -230,16 +230,20 @@ enum pll_status analogix_dp_get_pll_lock_status(struct analogix_dp_device *dp)
>   void analogix_dp_set_pll_power_down(struct analogix_dp_device *dp, bool enable)
>   {
>   	u32 reg;
> +	u32 mask = DP_PLL_PD;
> +	u32 pd_addr = ANALOGIX_DP_PLL_CTL;
>   
> -	if (enable) {
> -		reg = readl(dp->reg_base + ANALOGIX_DP_PLL_CTL);
> -		reg |= DP_PLL_PD;
> -		writel(reg, dp->reg_base + ANALOGIX_DP_PLL_CTL);
> -	} else {
> -		reg = readl(dp->reg_base + ANALOGIX_DP_PLL_CTL);
> -		reg &= ~DP_PLL_PD;
> -		writel(reg, dp->reg_base + ANALOGIX_DP_PLL_CTL);
> +	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type)) {
> +		pd_addr = ANALOGIX_DP_PD;
> +		mask = RK_PLL_PD;
>   	}
> +
> +	reg = readl(dp->reg_base + pd_addr);
> +	if (enable)
> +		reg |= mask;
> +	else
> +		reg &= ~mask;
> +	writel(reg, dp->reg_base + pd_addr);
>   }
>   
>   void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
>