[PATCH v3] drm/bridge/synopsys: dsi: add optional pixel clock
Philippe CORNU
philippe.cornu at st.com
Wed Jan 24 01:24:06 PST 2018
Hi Brian,
On 01/23/2018 09:49 PM, Brian Norris wrote:
> Hi,
>
> Philippe asked me to review the last version. I'm not sure I have a lot
> to contribute. Maybe Rockchip folks who wrote this stuff in the first
> place might. I've CC'd some.
>
> On Tue, Jan 23, 2018 at 06:08:06PM +0100, Philippe Cornu wrote:
>> The pixel clock is optional. When available, it offers a better
>> preciseness for timing computations and allows to reduce the extra dsi
>> bandwidth in burst mode (from ~20% to ~10-12%, hw platform dependant).
>>
>> Reviewed-by: Andrzej Hajda <a.hajda at samsung.com>
>> Signed-off-by: Philippe Cornu <philippe.cornu at st.com>
>> ---
>> Changes in v3: Simplify px_clk probing thanks to Andrzej Hajda comments
>>
>> Changes in v2: Improve px_clk probing in case of ENOENT dt returned value
>> (thanks to Philipp Zabel & Andrzej Hajda comments)
>>
>> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 25 +++++++++++++++++++------
>> 1 file changed, 19 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>> index ed8af32f8e52..9fb35385c348 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>> @@ -217,6 +217,7 @@ struct dw_mipi_dsi {
>> void __iomem *base;
>>
>> struct clk *pclk;
>> + struct clk *px_clk;
>>
>> unsigned int lane_mbps; /* per lane */
>> u32 channel;
>> @@ -703,24 +704,28 @@ static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
>> struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
>> const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
>> void *priv_data = dsi->plat_data->priv_data;
>> + struct drm_display_mode px_clk_mode = *mode;
>> int ret;
>>
>> clk_prepare_enable(dsi->pclk);
>>
>> - ret = phy_ops->get_lane_mbps(priv_data, mode, dsi->mode_flags,
>> + if (dsi->px_clk)
>> + px_clk_mode.clock = clk_get_rate(dsi->px_clk) / 1000;
>> +
>> + ret = phy_ops->get_lane_mbps(priv_data, &px_clk_mode, dsi->mode_flags,
>> dsi->lanes, dsi->format, &dsi->lane_mbps);
>> if (ret)
>> DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");
>>
>> pm_runtime_get_sync(dsi->dev);
>> dw_mipi_dsi_init(dsi);
>> - dw_mipi_dsi_dpi_config(dsi, mode);
>> + dw_mipi_dsi_dpi_config(dsi, &px_clk_mode);
>> dw_mipi_dsi_packet_handler_config(dsi);
>> dw_mipi_dsi_video_mode_config(dsi);
>> - dw_mipi_dsi_video_packet_config(dsi, mode);
>> + dw_mipi_dsi_video_packet_config(dsi, &px_clk_mode);
>> dw_mipi_dsi_command_mode_config(dsi);
>> - dw_mipi_dsi_line_timer_config(dsi, mode);
>> - dw_mipi_dsi_vertical_timing_config(dsi, mode);
>> + dw_mipi_dsi_line_timer_config(dsi, &px_clk_mode);
>> + dw_mipi_dsi_vertical_timing_config(dsi, &px_clk_mode);
>>
>> dw_mipi_dsi_dphy_init(dsi);
>> dw_mipi_dsi_dphy_timing_config(dsi);
>> @@ -734,7 +739,7 @@ static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
>>
>> dw_mipi_dsi_dphy_enable(dsi);
>>
>> - dw_mipi_dsi_wait_for_two_frames(mode);
>> + dw_mipi_dsi_wait_for_two_frames(&px_clk_mode);
>>
>> /* Switch to cmd mode for panel-bridge pre_enable & panel prepare */
>> dw_mipi_dsi_set_mode(dsi, 0);
>> @@ -828,6 +833,14 @@ __dw_mipi_dsi_probe(struct platform_device *pdev,
>> return ERR_PTR(ret);
>> }
>>
>> + dsi->px_clk = devm_clk_get(dev, "px_clk");
>
> Did you write a device tree binding document update for this anywhere?
>
> Brian
>
Many thanks for your review,
yes, "px_clk" is already documented, please have a look to
Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
Philippe :-)
>> + if (IS_ERR(dsi->px_clk)) {
>> + ret = PTR_ERR(dsi->px_clk);
>> + if (ret != ENOENT)
>> + dev_err(dev, "Unable to get opt. px_clk: %d\n", ret);
>> + dsi->px_clk = NULL;
>> + }
>> +
>> /*
>> * Note that the reset was not defined in the initial device tree, so
>> * we have to be prepared for it not being found.
>> --
>> 2.15.1
>>
More information about the Linux-rockchip
mailing list