[RESEND PATCH v6 00/27] DRM Rockchip rk3399 (Kevin)

Andrzej Hajda a.hajda at samsung.com
Mon Apr 23 23:43:01 PDT 2018


On 23.04.2018 12:49, Enric Balletbo i Serra wrote:
> Hi Andrzej,
>
> This is the rebased version of v6 series. This patchset includes cleanups,
> improvements, and bug fixes for Rockchip DRM driver and PSR support.
>
> This version is a RESEND of v6 with few changes. The following two
> patches are not included and will be send in a separate patchset for
> further discussion.
>
> - [PATCH v6 24/30] drm/rockchip: Disable PSR on input events
> - [PATCH v6 25/30] drm/rockchip: Cancel PSR enable work before changing
>                    the state
>
> The following patch was remove as is not needed.
>
> - [PATCH v6 28/30] drm/rockchip: Disable PSR from reboot notifier
>
> I think that the other patches have the required tags and are ready to
> be merged.

Queued to drm-misc-next.

Regards
Andrzej


>
> Regards,
>   Enric
>
> Changes in v6:
> - Removed the following patches as are already applied.
>   [PATCH v5 01/36] drm/bridge: analogix_dp: detect Sink PSR state after
>   configuring the PSR
>   [PATCH v5 02/36] drm/rockchip: Remove analogix psr worker
>   [PATCH v5 03/36] drm/bridge: analogix_dp: Don't change psr while
>   bridge is disabled
> - Explain in the commit message why we need to increase
>   the delay in the timeout loop in
>   [PATCH v5 07/36] drm/bridge: analogix_dp: Move enable video into
>   config_video()
> - Add Reviewed-by: Archit Taneja <architt at codeaurora.org> for the
>   drm/bridge parts
> - Add Reviewed-by: Heiko Stuebner <heiko at sntech.de> for
>   [PATCH v5 19/36] drm/rockchip: Restore psr->state when enable/disable
>   psr failed
>
> Changes in v5:
> - Removed the following patches as are already applied.
>   [PATCH v4 01/38] drm/bridge: analogix_dp: set psr activate/deactivate
>   when enable/disable bridge
>   [PATCH v4 02/38] drm/rockchip: Don't use atomic constructs for psr
> - Add Mareks tested-tag and including the missing people.
> - [PATCH v4 15/38] move analogix_dp_set_analog_power_down() before
>   phy_power_off() to fix Exynos issue.
>
> Changes in v4:
> - Rebased all on top of drm-misc-next
> - Removed the following patches as are already applied.
>   [PATCH v3 01/43] drm/rockchip: Get rid of unnecessary struct fields
>   [PATCH v3 02/43] drm/rockchip: support prime import sg table
>   [PATCH v3 03/43] drm/rockchip: Respect page offset for PRIME mmap
>   calls
> - Removed the following patches as now are part of another patchset
>   [PATCH v3 05/43] drm/bridge: analogix_dp: Don't power bridge in
>   analogix_dp_bind
>   [PATCH v3 33/43] drm/panel: simple: Change mode for Sharp lq123p1jx31
>
> Changes in v3:
> - Addressed some of the comments from Sean on the v2
>
> Changes in v2:
> - A few patches have been replaced by newer and cleaner versions from
>   the ChromeOS kernel gerrit, especially about disallowing PSR for the
>   whole atomic commit.
>
>
> Douglas Anderson (4):
>   drm/bridge: analogix_dp: Reorder plat_data->power_off to happen sooner
>   drm/bridge: analogix_dp: Properly log AUX CH errors
>   drm/bridge: analogix_dp: Properly disable aux chan retries on rockchip
>   drm/bridge: analogix_dp: Split the platform-specific poweron in two
>     parts
>
> Lin Huang (6):
>   drm/bridge: analogix_dp: Move enable video into config_video()
>   drm/bridge: analogix_dp: Check AUX_EN status when doing AUX transfer
>   drm/bridge: analogix_dp: Ensure edp is disabled when shutting down the
>     panel
>   drm/bridge: analogix_dp: Extend hpd check time to 100ms
>   drm/bridge: analogix_dp: Check dpcd write/read status
>   drm/bridge: analogix_dp: Reset aux channel if an error occurred
>
> Mark Yao (1):
>   drm/rockchip: pre dither down when output bpc is 8bit
>
> Tomasz Figa (5):
>   drm/rockchip: analogix_dp: Do not call Analogix code before bind
>   drm/rockchip: psr: Avoid redundant calls to .set() callback
>   drm/rockchip: psr: Sanitize semantics of allow/inhibit API
>   drm/rockchip: Disallow PSR for the whole atomic commit
>   drm/rockchip: psr: Remove flush by CRTC
>
> zain wang (11):
>   drm/bridge: analogix_dp: Don't use fast link training when panel just
>     powered up
>   drm/bridge: analogix_dp: Retry bridge enable when it failed
>   drm/bridge: analogix_dp: Wait for HPD signal before configuring link
>   drm/bridge: analogix_dp: Set PD_INC_BG first when powering up edp phy
>   drm/bridge: analogix_dp: Fix incorrect usage of enhanced mode
>   drm/bridge: analogix_dp: Fix AUX_PD bit for Rockchip
>   drm/rockchip: Restore psr->state when enable/disable psr failed
>   drm/bridge: analogix_dp: Don't use ANALOGIX_DP_PLL_CTL to control pll
>   drm/bridge: analogix_dp: Fix timeout of video streamclk config
>   drm/bridge: analogix_dp: Fix incorrect operations with register
>     ANALOGIX_DP_FUNC_EN_1
>   drm/bridge: analogix_dp: Move fast link training detect to set_bridge
>
>  .../drm/bridge/analogix/analogix_dp_core.c    | 331 +++++++++++++-----
>  .../drm/bridge/analogix/analogix_dp_core.h    |   5 +-
>  .../gpu/drm/bridge/analogix/analogix_dp_reg.c | 236 +++++++------
>  .../gpu/drm/bridge/analogix/analogix_dp_reg.h |   7 +
>  drivers/gpu/drm/exynos/exynos_dp.c            |   2 +-
>  .../gpu/drm/rockchip/analogix_dp-rockchip.c   |  37 +-
>  drivers/gpu/drm/rockchip/rockchip_drm_drv.h   |   1 +
>  drivers/gpu/drm/rockchip/rockchip_drm_fb.c    |  61 +++-
>  drivers/gpu/drm/rockchip/rockchip_drm_psr.c   | 158 ++++-----
>  drivers/gpu/drm/rockchip/rockchip_drm_psr.h   |   7 +-
>  drivers/gpu/drm/rockchip/rockchip_drm_vop.c   |  13 +-
>  drivers/gpu/drm/rockchip/rockchip_drm_vop.h   |   1 +
>  drivers/gpu/drm/rockchip/rockchip_vop_reg.c   |   1 +
>  include/drm/bridge/analogix_dp.h              |   3 +-
>  14 files changed, 559 insertions(+), 304 deletions(-)
>




More information about the Linux-rockchip mailing list