[PATCH v8 07/14] ARM: dts: rockchip: add clocks in iommu nodes

[Heiko Stübner]

Am Montag, 9. April 2018, 17:55:40 CEST schrieb Heiko Stübner:
> Am Montag, 9. April 2018, 17:53:01 CEST schrieb Robin Murphy:
> > On 09/04/18 16:44, Heiko Stübner wrote:
> > > Hi Tomeu,
> > > 
> > > Am Montag, 9. April 2018, 16:41:56 CEST schrieb Tomeu Vizoso:
> > >> in today's linux-next, the DRM driver fails to probe because the iommu
> > >> driver fails to find the aclk. I need to apply this patch for things
> > >> to work again.
> > > 
> > > Thanks for catching that issue.
> > > 
> > > This seems to expose a backwards-compatibility issue, as this breaks
> > > all old devicetrees, so should get a proper fix, apart from me applying
> > > the dt-patch I missed.
> > > 
> > > Looking at the iommu-clock-handling patch, I imagine this part as
> > > the culprit:
> > > 
> > > +	iommu->num_clocks = ARRAY_SIZE(rk_iommu_clocks);
> > > +	iommu->clocks = devm_kcalloc(iommu->dev, iommu->num_clocks,
> > > +				     sizeof(*iommu->clocks), GFP_KERNEL);
> > > +	if (!iommu->clocks)
> > > +		return -ENOMEM;
> > > 
> > > The clk-bulk functions seem to work with simple for loops and
> > > should (as the other standard clock functions) just work fine with
> > > an empty struct, so I guess a simple
> > > 
> > > 	if (!iommu->clocks && iommu->num_clocks > 0)
> > > 	
> > > 		return -ENOMEM;
> > > 
> > > should hopefully be enough. I'll try to give this a test later on
> > > if nobody beats me to it :-)
> > 
> > But iommu->num_clocks is clearly set to a nonzero compile-time constant
> > at this point ;)
> > 
> > I'd assume it's the return from devm_clk_bulk_get() which needs to
> > special-case the "no clocks found" case from any other error, and *then*
> > blat num_clocks to 0 if so.
> 
> you're right of course. Looking at it again, I now clearly see the
> ARRAY_SIZE and am wondering what made me think num_clocks would be
> runtime-read.
> 
> Must be those 25°C today ;-)

In any case, this does not seem to fully fix the issue ... or be more exact 
seems to be the only issue.

- With 4.16 both pinky and kevin have working displays.
- When I was merging display patches to drm-misc, I did boot-tests on
  both pinky and kevin, keeping their displays in a working state.

- With current torvalds head (iommu not merged yet)
e9092d0d9796 ("Fix subtle macro variable shadowing in min_not_zero()")

I get display output on rk3399-kevin (edp), but not on
rk3288-pinky (edp + hdmi). [components + hdmi device+modes get
recognized correctly though]

- With iommu changes merged I end up with the failing clock issue
  which can be countered by making the iommu-clocks optional.

- After that I get working display output again on kevin but not pinky.

Looks like this needs bisecting.