[PATCH 2/2] pinctrl: rockchip: Fix the correct routing config for the gmac-m1 pins of rmii and rgmii
david.wu at rock-chips.com
Sun Oct 8 18:21:22 PDT 2017
Thanks for you adding it.
I left the office for a few days due to holiday.
在 2017/10/7 18:32, Linus Walleij 写道:
> On Sat, Sep 30, 2017 at 5:07 PM, Heiko Stuebner <heiko at sntech.de> wrote:
>> Am Samstag, 30. September 2017, 20:13:21 CEST schrieb David Wu:
>>> If the gmac-m1 optimization(bit10) is selected, the gpio function
>>> of gmac pins is not valid. We may use the rmii mode for gmac interface,
>>> the pins such as rx_d2, rx_d3, which the rgmii mode used, but rmii not
>>> used could be taken as gpio function. So gmac_rxd0m1 selects the bit2,
>>> and gmac_rxd0m3 select bit10 is more correct.
>>> Signed-off-by: David Wu <david.wu at rock-chips.com>
>> the patch subject should mention the the rk3328 whose routing gets fixed
>> (like adding a simple "on rk3328" to it), otherwise
>> Reviewed-by: Heiko Stuebner <heiko at sntech.de>
> I added rk3328 to it, also assumed this Reviewed-by covers patch 1/2
> as well and applied both with your tag.
> Linus Walleij
More information about the Linux-rockchip