[PATCH v4 2/7] mfd: rk808: add rk805 regs addr and ID

[Elaine Zhang]

On 03/23/2017 08:15 PM, Lee Jones wrote:
> On Fri, 17 Mar 2017, Elaine Zhang wrote:
>
>> Signed-off-by: Elaine Zhang <zhangqing at rock-chips.com>
>> ---
>>   include/linux/mfd/rk808.h | 119 ++++++++++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 119 insertions(+)
>>
>> diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
>> index 54feb140c210..a133309b52f9 100644
>> --- a/include/linux/mfd/rk808.h
>> +++ b/include/linux/mfd/rk808.h
>> @@ -206,6 +206,96 @@ enum rk818_reg {
>>   #define RK818_USB_ILMIN_2000MA		0x7
>>   #define RK818_USB_CHG_SD_VSEL_MASK	0x70
>>
>> +/* RK805 */
>> +enum rk805_reg {
>> +	RK805_ID_DCDC1,
>> +	RK805_ID_DCDC2,
>> +	RK805_ID_DCDC3,
>> +	RK805_ID_DCDC4,
>> +	RK805_ID_LDO1,
>> +	RK805_ID_LDO2,
>> +	RK805_ID_LDO3,
>> +};
>> +
>> +/* INTERRUPT REGISTER */
>> +#define RK805_INT_STS_REG		0x4C
>> +#define RK805_INT_STS_MSK_REG		0x4D
>> +#define RK805_GPIO_IO_POL_REG		0x50
>> +#define RK805_OUT_REG			0x52
>> +#define RK805_ON_SOURCE_REG		0xAE
>> +#define RK805_OFF_SOURCE_REG		0xAF
>> +
>> +/* POWER CHANNELS ENABLE REGISTER */
>> +#define RK805_DCDC_EN_REG		0x23
>> +#define RK805_SLP_DCDC_EN_REG		0x25
>> +#define RK805_SLP_LDO_EN_REG		0x26
>> +#define RK805_LDO_EN_REG		0x27
>> +
>> +/* CONFIG REGISTER */
>> +#define RK805_THERMAL_REG		0x22
>> +
>> +/* BUCK AND LDO CONFIG REGISTER */
>> +#define RK805_BUCK_LDO_SLP_LP_EN_REG	0x2A
>> +#define RK805_BUCK1_CONFIG_REG		0x2E
>> +#define RK805_BUCK1_ON_VSEL_REG		0x2F
>> +#define RK805_BUCK1_SLP_VSEL_REG	0x30
>> +#define RK805_BUCK2_CONFIG_REG		0x32
>> +#define RK805_BUCK2_ON_VSEL_REG		0x33
>> +#define RK805_BUCK2_SLP_VSEL_REG	0x34
>> +#define RK805_BUCK3_CONFIG_REG		0x36
>> +#define RK805_BUCK4_CONFIG_REG		0x37
>> +#define RK805_BUCK4_ON_VSEL_REG		0x38
>> +#define RK805_BUCK4_SLP_VSEL_REG	0x39
>> +#define RK805_LDO1_ON_VSEL_REG		0x3B
>> +#define RK805_LDO1_SLP_VSEL_REG		0x3C
>> +#define RK805_LDO2_ON_VSEL_REG		0x3D
>> +#define RK805_LDO2_SLP_VSEL_REG		0x3E
>> +#define RK805_LDO3_ON_VSEL_REG		0x3F
>> +#define RK805_LDO3_SLP_VSEL_REG		0x40
>> +#define RK805_OUT_REG			0x52
>> +#define RK805_ON_SOURCE_REG		0xAE
>> +#define RK805_OFF_SOURCE_REG		0xAF
>
> Why aren't all of these in numerical order?
I will fixed it in patch V5.
>
>> +#define RK805_NUM_REGULATORS		7
>> +
>> +#define RK805_PWRON_FALL_RISE_INT_EN	0x0
>> +#define RK805_PWRON_FALL_RISE_INT_MSK	0x81
>> +
>> +/* RK805 IRQ Definitions */
>> +#define RK805_IRQ_PWRON_RISE		0
>> +#define RK805_IRQ_VB_LOW		1
>> +#define RK805_IRQ_PWRON			2
>> +#define RK805_IRQ_PWRON_LP		3
>> +#define RK805_IRQ_HOTDIE		4
>> +#define RK805_IRQ_RTC_ALARM		5
>> +#define RK805_IRQ_RTC_PERIOD		6
>> +#define RK805_IRQ_PWRON_FALL		7
>> +
>> +#define RK805_IRQ_PWRON_RISE_MSK	BIT(0)
>> +#define RK805_IRQ_VB_LOW_MSK		BIT(1)
>> +#define RK805_IRQ_PWRON_MSK		BIT(2)
>> +#define RK805_IRQ_PWRON_LP_MSK		BIT(3)
>> +#define RK805_IRQ_HOTDIE_MSK		BIT(4)
>> +#define RK805_IRQ_RTC_ALARM_MSK		BIT(5)
>> +#define RK805_IRQ_RTC_PERIOD_MSK	BIT(6)
>> +#define RK805_IRQ_PWRON_FALL_MSK	BIT(7)
>> +
>> +#define RK805_PWR_RISE_INT_STATUS	BIT(0)
>> +#define RK805_VB_LOW_INT_STATUS		BIT(1)
>> +#define RK805_PWRON_INT_STATUS		BIT(2)
>> +#define RK805_PWRON_LP_INT_STATUS	BIT(3)
>> +#define RK805_HOTDIE_INT_STATUS		BIT(4)
>> +#define RK805_ALARM_INT_STATUS		BIT(5)
>> +#define RK805_PERIOD_INT_STATUS		BIT(6)
>> +#define RK805_PWR_FALL_INT_STATUS	BIT(7)
>> +
>> +#define RK805_BUCK1_2_ILMAX_MASK	(3 << 6)
>> +#define RK805_BUCK3_4_ILMAX_MASK        (3 << 3)
>> +#define RK805_RTC_PERIOD_INT_MASK	(1 << 6)
>> +#define RK805_RTC_ALARM_INT_MASK	(1 << 5)
>> +#define RK805_INT_ALARM_EN		(1 << 3)
>> +#define RK805_INT_TIMER_EN		(1 << 2)
>> +
>>   /* RK808 IRQ Definitions */
>>   #define RK808_IRQ_VOUT_LO	0
>>   #define RK808_IRQ_VB_LO		1
>> @@ -298,7 +388,14 @@ enum rk818_reg {
>>   #define VOUT_LO_INT	BIT(0)
>>   #define CLK32KOUT2_EN	BIT(0)
>>
>> +#define TEMP115C			0x0c
>> +#define TEMP_HOTDIE_MSK			0x0c
>> +#define SLP_SD_MSK			(0x3 << 2)
>> +#define SHUTDOWN_FUN			(0x2 << 2)
>> +#define SLEEP_FUN			(0x1 << 2)
>>   #define RK8XX_ID_MSK			0xfff0
>> +#define FPWM_MODE			BIT(7)
>> +
>>   enum {
>>   	BUCK_ILMIN_50MA,
>>   	BUCK_ILMIN_100MA,
>> @@ -322,6 +419,28 @@ enum {
>>   };
>>
>>   enum {
>> +	RK805_BUCK1_2_ILMAX_2500MA,
>> +	RK805_BUCK1_2_ILMAX_3000MA,
>> +	RK805_BUCK1_2_ILMAX_3500MA,
>> +	RK805_BUCK1_2_ILMAX_4000MA,
>> +};
>> +
>> +enum {
>> +	RK805_BUCK3_ILMAX_1500MA,
>> +	RK805_BUCK3_ILMAX_2000MA,
>> +	RK805_BUCK3_ILMAX_2500MA,
>> +	RK805_BUCK3_ILMAX_3000MA,
>> +};
>> +
>> +enum {
>> +	RK805_BUCK4_ILMAX_2000MA,
>> +	RK805_BUCK4_ILMAX_2500MA,
>> +	RK805_BUCK4_ILMAX_3000MA,
>> +	RK805_BUCK4_ILMAX_3500MA,
>> +};
>> +
>> +enum {
>> +	RK805_ID = 0x8050,
>>   	RK808_ID = 0x0000,
>>   	RK818_ID = 0x8181,
>>   };
>