[PATCH] regulator: rk808: Fix RK818 LDO2

[Wadim Egorov]

Set the correct voltage select register for LDO2.

Signed-off-by: Wadim Egorov <w.egorov at phytec.de>
---
 drivers/regulator/rk808-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index fb44d52..a16d814 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -519,7 +519,7 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
 		RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
 		BIT(0), 400),
 	RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
-		RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+		RK818_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
 		BIT(1), 400),
 	{
 		.name = "LDO_REG3",
-- 
1.9.1