[PATCH 01/14] clk: rockchip: add more clk ids for rv1108

[Heiko Stuebner]

Hi Andy,

Am Montag, 31. Juli 2017, 18:06:42 CEST schrieb Andy Yan:
> From: Elaine Zhang <zhangqing at rock-chips.com>
> 
> Added the missing clock ids, make the clock more complete.
> 
> Signed-off-by: Elaine Zhang <zhangqing at rock-chips.com>
> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>

this clock-id patch is way to overloaded. Please split into 3 parts:

- completely new clock-ids
- changes to existing clock-ids
  This also needs a very good reasoning, as such constant ids are
  considered part of api and should not change to prevent breakage
  with old devicetrees. So please double-check if the rename is really
  necessary.
- cosmetics ... aka the indentation stuff

[...]

>  /* aclk gates */
>  #define ACLK_DMAC			192
> -#define ACLK_PRE			193
> +#define ACLK_BUS			193

This is one such case where you need a very good reason

[...]

> @@ -59,18 +120,30 @@
>  #define PCLK_I2C2			261
>  #define PCLK_I2C3			262
>  #define PCLK_SPI			263
> -#define PCLK_SFC			264

why is this clock going away?

>  #define PCLK_UART0			265
>  #define PCLK_UART1			266
>  #define PCLK_UART2			267
>  #define PCLK_TSADC			268
> -#define PCLK_PWM			269
> +#define PCLK_PWM1			269

In your pwm patch, all blocks use the same clocks, so
this rename should be unnecessary


>  /* hclk gates */
>  #define HCLK_I2S0_8CH			320
> -#define HCLK_I2S1_8CH			321
> +#define HCLK_I2S1_2CH			321

Again reasoning required (that i2s1 has 2 channels
but not 8 should be ok for that)

>  #define HCLK_I2S2_2CH			322
>  #define HCLK_NANDC			323
>  #define HCLK_SDMMC			324

Heiko