[PATCH v3 11/24] drm/rockchip: dw-mipi-dsi: prepare panel after phy init

John Keeping john at metanate.com
Sun Jan 29 05:24:31 PST 2017


Some panels need to be configured with commands sent over the MIPI link,
which they will do in the prepare hook.  Call this after the PHY has
been initialized so that we are able to send commands to the panel.

Signed-off-by: John Keeping <john at metanate.com>
Reviewed-by: Chris Zhong <zyw at rock-chips.com>
---
v3:
- Add Chris' Reviewed-by
Unchanged in v2

 drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index ddbc037e7ced..7ada6d8ed143 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -896,12 +896,14 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
 	dw_mipi_dsi_dphy_timing_config(dsi);
 	dw_mipi_dsi_dphy_interface_config(dsi);
 	dw_mipi_dsi_clear_err(dsi);
-	if (drm_panel_prepare(dsi->panel))
-		dev_err(dsi->dev, "failed to prepare panel\n");
 
 	dw_mipi_dsi_phy_init(dsi);
 	dw_mipi_dsi_wait_for_two_frames(mode);
 
+	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+	if (drm_panel_prepare(dsi->panel))
+		dev_err(dsi->dev, "failed to prepare panel\n");
+
 	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
 	drm_panel_enable(dsi->panel);
 
-- 
2.11.0.197.gb556de5.dirty




More information about the Linux-rockchip mailing list