[PATCH v4 14/23] drm/rockchip: dw-mipi-dsi: ensure PHY is reset

[John Keeping]

Also don't power up the DSI host at this point since this is not
necessary in order to configure the PHY and we do so later when
selecting video or command mode.

Signed-off-by: John Keeping <john at metanate.com>
Reviewed-by: Chris Zhong <zyw at rock-chips.com>
Reviewed-by: Sean Paul <seanpaul at chromium.org>
---
v4:
- Add Sean's Reviewed-by
v3:
- Add Chris' Reviewed-by
Unchanged in v2
---
 drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index 0f9be41f0361..78d676b7e516 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -397,7 +397,10 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
 		return testdin;
 	}
 
-	dsi_write(dsi, DSI_PWR_UP, POWERUP);
+	/* Start by clearing PHY state */
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR);
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
 
 	dw_mipi_dsi_phy_write(dsi, 0x10, BYPASS_VCO_RANGE |
 					 VCO_RANGE_CON_SEL(vco) |
-- 
2.12.0.rc0.230.gf625d4cdb9.dirty