[PATCH v6 1/3] dt-bindings: display: Add Document for Rockchip Soc LVDS

Sandy Huang hjc at rock-chips.com
Tue Aug 22 23:30:13 PDT 2017



在 2017/8/22 10:48, Rob Herring 写道:
> On Fri, Aug 18, 2017 at 04:09:49PM +0800, Sandy Huang wrote:
>> This patch add Document for Rockchip Soc RK3288 LVDS,
>> This based on the patches from Mark yao and Heiko Stuebner.
>>
>> Signed-off-by: Sandy Huang <hjc at rock-chips.com>
>> Signed-off-by: Mark yao <mark.yao at rock-chips.com>
>> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
>> ---
>> Changes:
>>      - use data-mapping instead of rockchip,data-mapping and rockchip,data-width
>>      - move rockchip,output to lvds node
>>
>>   .../bindings/display/rockchip/rockchip-lvds.txt    | 100 +++++++++++++++++++++
>>   1 file changed, 100 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
>>
>> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
>> new file mode 100644
>> index 0000000..a33821b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
>> @@ -0,0 +1,100 @@
>> +Rockchip RK3288 LVDS interface
>> +================================
>> +
>> +Required properties:
>> +- compatible: matching the soc type, one of
>> +	- "rockchip,rk3288-lvds";
>> +
>> +- reg: physical base address of the controller and length
>> +	of memory mapped region.
>> +- clocks: must include clock specifiers corresponding to entries in the
>> +	clock-names property.
>> +- clock-names: must contain "pclk_lvds"
>> +
>> +- avdd1v0-supply: regulator phandle for 1.0V analog power
>> +- avdd1v8-supply: regulator phandle for 1.8V analog power
>> +- avdd3v3-supply: regulator phandle for 3.3V analog power
>> +
>> +- rockchip,grf: phandle to the general register files syscon
>> +- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output face.
> 
> s/face/interface/
>
thanks, this will be fix at next version;

>> +
>> +Optional properties:
>> +- pinctrl-names: must contain a "lcdc" entry.
>> +- pinctrl-0: pin control group to be used for this controller.
>> +
>> +Required nodes:
>> +
>> +The lvds has two video ports as described by
>> +	Documentation/devicetree/bindings/media/video-interfaces.txt.
>> +Their connections are modeled using the OF graph bindings specified in
>> +	Documentation/devicetree/bindings/graph.txt.
>> +
>> +- video port 0 for the VOP inputs
> 
> with 2 endpoints...
> 
yes, lvds port0 remote endpoint maybe vopb or vopl, i will add this 
describe at next version.

>> +- video port 1 for either a panel or subsequent encoder
>> +
>> +the lvds panel described by
>> +	Documentation/devicetree/bindings/display/panel/simple-panel.txt
>> +
>> +Panel required properties:
>> +- ports for remote LVDS output
>> +
>> +Panel optional properties:
>> +- data-mapping: should be "vesa-24","jeida-24" or "jeida-18".
>> +This describes decribed by:
>> +	Documentation/devicetree/bindings/display/panel/panel-lvds.txt
>> +
>> +Example:
>> +
>> +lvds_panel: lvds-panel {
>> +	status = "okay";
> 
> Don't show status in examples.
> 
thanks, this will be fix at next version;
>> +	compatible = "auo,b101ean01";
>> +	enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
>> +	data-mapping = "jeida-24";
>> +
>> +	ports {
>> +		panel_in_lvds: endpoint {
>> +			remote-endpoint = <&lvds_out_panel>;
>> +		};
>> +	};
>> +};
>> +
>> +For Rockchip RK3288:
>> +
>> +	lvds: lvds at ff96c000 {
>> +		compatible = "rockchip,rk3288-lvds";
>> +		rockchip,grf = <&grf>;
>> +		reg = <0xff96c000 0x4000>;
>> +		clocks = <&cru PCLK_LVDS_PHY>;
>> +		clock-names = "pclk_lvds";
>> +		pinctrl-names = "lcdc";
>> +		pinctrl-0 = <&lcdc_ctl>;
>> +		avdd1v0-supply = <&vdd10_lcd>;
>> +		avdd1v8-supply = <&vcc18_lcd>;
>> +		avdd3v3-supply = <&vcca_33>;
>> +		rockchip,output = "rgb";
>> +		ports {
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +
>> +			lvds_in: port at 0 {
>> +				reg = <0>;
>> +
>> +				lvds_in_vopb: endpoint at 0 {
>> +					reg = <0>;
>> +					remote-endpoint = <&vopb_out_lvds>;
>> +				};
>> +				lvds_in_vopl: endpoint at 1 {
>> +					reg = <1>;
>> +					remote-endpoint = <&vopl_out_lvds>;
>> +				};
>> +			};
>> +
>> +			lvds_out: port at 1 {
>> +				reg = <1>;
>> +
>> +				lvds_out_panel: endpoint {
>> +					remote-endpoint = <&panel_in_lvds>;
>> +				};
>> +			};
>> +		};
>> +	};
>> -- 
>> 2.7.4
>>
>>
> 
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
> 
> 
> 




More information about the Linux-rockchip mailing list