[PATCH 3/3] drm/rockchip: Add support for Rockchip Soc LVDS

Sandy Huang sandy.huang at rock-chips.com
Thu Aug 10 02:35:52 PDT 2017


Hi Sean Paul,
     Thanks for your review.

在 2017/8/10 3:58, Sean Paul 写道:
> On Wed, Aug 09, 2017 at 06:00:59PM +0800, Sandy Huang wrote:
>> This adds support for Rockchip soc lvds found on rk3288
>> Based on the patches from Mark yao and Heiko Stuebner
>>
>> Signed-off-by: Sandy Huang <hjc at rock-chips.com>
>> Signed-off-by: Mark yao <mark.yao at rock-chips.com>
>> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
>> ---
>>   drivers/gpu/drm/rockchip/Kconfig         |   9 +
>>   drivers/gpu/drm/rockchip/Makefile        |   1 +
>>   drivers/gpu/drm/rockchip/rockchip_lvds.c | 734 +++++++++++++++++++++++++++++++
>>   drivers/gpu/drm/rockchip/rockchip_lvds.h | 112 +++++
>>   4 files changed, 856 insertions(+)
>>   create mode 100644 drivers/gpu/drm/rockchip/rockchip_lvds.c
>>   create mode 100644 drivers/gpu/drm/rockchip/rockchip_lvds.h
>>
>> diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
>> index 50c41c0..80672f4 100644
>> --- a/drivers/gpu/drm/rockchip/Kconfig
>> +++ b/drivers/gpu/drm/rockchip/Kconfig
>> @@ -59,3 +59,12 @@ config ROCKCHIP_INNO_HDMI
>>   	  This selects support for Rockchip SoC specific extensions
>>   	  for the Innosilicon HDMI driver. If you want to enable
>>   	  HDMI on RK3036 based SoC, you should select this option.
>> +
>> +config ROCKCHIP_LVDS
>> +	bool "Rockchip LVDS support"
>> +	depends on DRM_ROCKCHIP
>> +	help
>> +	  Choose this option to enable support for Rockchip LVDS controllers.
>> +	  Rockchip rk3288 SoC has LVDS TX Controller can be used, and it
>> +	  support LVDS, rgb, dual LVDS output mode. say Y to enable its
>> +	  driver.
>> diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
>> index fa8dc9d..a881d2c 100644
>> --- a/drivers/gpu/drm/rockchip/Makefile
>> +++ b/drivers/gpu/drm/rockchip/Makefile
>> @@ -12,5 +12,6 @@ rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o
>>   rockchipdrm-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
>>   rockchipdrm-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi.o
>>   rockchipdrm-$(CONFIG_ROCKCHIP_INNO_HDMI) += inno_hdmi.o
>> +rockchipdrm-$(CONFIG_ROCKCHIP_LVDS) += rockchip_lvds.o
>>   
>>   obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o
>> diff --git a/drivers/gpu/drm/rockchip/rockchip_lvds.c b/drivers/gpu/drm/rockchip/rockchip_lvds.c
>> new file mode 100644
>> index 0000000..a4ad3f0
>> --- /dev/null
>> +++ b/drivers/gpu/drm/rockchip/rockchip_lvds.c
>> @@ -0,0 +1,734 @@
>> +/*
>> + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
>> + * Author:
>> + *      Mark Yao <mark.yao at rock-chips.com>
>> + *      Sandy huang <hjc at rock-chips.com>
>> + *
>> + * This software is licensed under the terms of the GNU General Public
>> + * License version 2, as published by the Free Software Foundation, and
>> + * may be copied, distributed, and modified under those terms.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <drm/drmP.h>
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_crtc_helper.h>
>> +#include <drm/drm_dp_helper.h>
>> +#include <drm/drm_panel.h>
>> +#include <drm/drm_of.h>
>> +
>> +#include <linux/component.h>
>> +#include <linux/clk.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/of_graph.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/regmap.h>
>> +#include <linux/reset.h>
>> +
>> +#include <video/display_timing.h>
>> +
>> +#include "rockchip_drm_drv.h"
>> +#include "rockchip_drm_vop.h"
>> +#include "rockchip_lvds.h"
>> +
>> +#define DISPLAY_OUTPUT_RGB		0
>> +#define DISPLAY_OUTPUT_LVDS		1
>> +#define DISPLAY_OUTPUT_DUAL_LVDS	2
>> +
>> +#define connector_to_lvds(c) \
>> +		container_of(c, struct rockchip_lvds, connector)
>> +
>> +#define encoder_to_lvds(c) \
>> +		container_of(c, struct rockchip_lvds, encoder)
>> +#define LVDS_CHIP(lvds)	((lvds)->soc_data->chip_type)
>> +
>> +/*
>> + * @grf_offset: offset inside the grf regmap for setting the rockchip lvds
> 
> You only document one member and it doesn't exist :(
I forgot to delete it, i will update at next version.
> 
>> + */
>> +struct rockchip_lvds_soc_data {
>> +	int chip_type;
>> +	int grf_soc_con6;
>> +	int grf_soc_con7;
>> +
>> +	bool has_vop_sel;
>> +};
>> +
>> +struct rockchip_lvds {
>> +	void *base;
>> +	struct device *dev;
>> +	void __iomem *regs;
>> +	struct regmap *grf;
>> +	struct clk *pclk;
>> +	const struct rockchip_lvds_soc_data *soc_data;
>> +
>> +	int output;
>> +	int format;
>> +
>> +	struct drm_device *drm_dev;
>> +	struct drm_panel *panel;
>> +	struct drm_bridge *bridge;
>> +	struct drm_connector connector;
>> +	struct drm_encoder encoder;
>> +
>> +	struct mutex suspend_lock;
>> +	int suspend;
>> +	struct dev_pin_info *pins;
>> +	struct drm_display_mode mode;
>> +};
>> +
>> +static inline void lvds_writel(struct rockchip_lvds *lvds, u32 offset, u32 val)
>> +{
>> +	writel_relaxed(val, lvds->regs + offset);
>> +	if ((lvds->output != DISPLAY_OUTPUT_LVDS) &&
>> +	     (LVDS_CHIP(lvds) == RK3288_LVDS))
> 
> Given that you only support one chip right now, it seems premature to worry
> about chip version. At any rate, it seems like it'd be more useful to store
> RK3288_LVDS_CHI_OFFSET in soc_data and do:
> 
> if (lvds->output == DISPLAY_OUTPUT_LVDS)
>          return;
> 
> writel_relaxed(val, lvds->regs + lvds->soc_data->ch1_offset + offset);
> 
> Then get rid of LVDS_CHIP and chip_type.
> 
> 
I will update at next version.

>> +		writel_relaxed(val,
>> +			       lvds->regs + offset + RK3288_LVDS_CH1_OFFSET);
>> +}
>> +
>> +static inline int lvds_name_to_format(const char *s)
>> +{
>> +	if (!s)
> 
> I don't think this can ever happen (and if it can, you should be initializing
> name to NULL each time before you call of_property_read_string) since
> of_property_read_string returns an error if prop->value == NULL.
> 
> Same comment for lvds_name_to_output.
> 
> 
I will update at next version.
>> +		return -EINVAL;
>> +
>> +	if (strncmp(s, "jeida", 6) == 0)
>> +		return LVDS_FORMAT_JEIDA;
>> +	else if (strncmp(s, "vesa", 5) == 0)
>> +		return LVDS_FORMAT_VESA;
>> +
>> +	return -EINVAL;
>> +}
>> +
>> +static inline int lvds_name_to_output(const char *s)
>> +{
>> +	if (!s)
>> +		return -EINVAL;
>> +
>> +	if (strncmp(s, "rgb", 3) == 0)
>> +		return DISPLAY_OUTPUT_RGB;
>> +	else if (strncmp(s, "lvds", 4) == 0)
>> +		return DISPLAY_OUTPUT_LVDS;
>> +	else if (strncmp(s, "duallvds", 8) == 0)
>> +		return DISPLAY_OUTPUT_DUAL_LVDS;
>> +
>> +	return -EINVAL;
>> +}
>> +
>> +static int rockchip_lvds_poweron(struct rockchip_lvds *lvds)
>> +{
>> +	int ret;
>> +
>> +	if (lvds->pclk) {
> 
> The clk_* functions check for NULL so you don't have to. Remove all
> if (lvds->pclk) checks.
> 
It will be removed at next version.

>> +		ret = clk_enable(lvds->pclk);
>> +		if (ret < 0) {
>> +			dev_err(lvds->dev, "failed to enable lvds pclk %d\n", ret);
> 
> Please use DRM_DEV_* error message logging.
> 
I will update at next verison.
>> +			return ret;
>> +		}
>> +	}
>> +	ret = pm_runtime_get_sync(lvds->dev);
>> +	if (ret < 0) {
>> +		dev_err(lvds->dev, "failed to get pm runtime: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	if (lvds->output == DISPLAY_OUTPUT_RGB) {
>> +		lvds_writel(lvds, RK3288_LVDS_CH0_REG0,
>> +			    RK3288_LVDS_CH0_REG0_TTL_EN |
>> +			    RK3288_LVDS_CH0_REG0_LANECK_EN |
>> +			    RK3288_LVDS_CH0_REG0_LANE4_EN |
>> +			    RK3288_LVDS_CH0_REG0_LANE3_EN |
>> +			    RK3288_LVDS_CH0_REG0_LANE2_EN |
>> +			    RK3288_LVDS_CH0_REG0_LANE1_EN |
>> +			    RK3288_LVDS_CH0_REG0_LANE0_EN);
>> +		lvds_writel(lvds, RK3288_LVDS_CH0_REG2,
>> +			    RK3288_LVDS_PLL_FBDIV_REG2(0x46));
>> +
>> +		lvds_writel(lvds, RK3288_LVDS_CH0_REG3,
>> +			    RK3288_LVDS_PLL_FBDIV_REG3(0x46));
>> +		lvds_writel(lvds, RK3288_LVDS_CH0_REG4,
>> +			    RK3288_LVDS_CH0_REG4_LANECK_TTL_MODE |
>> +			    RK3288_LVDS_CH0_REG4_LANE4_TTL_MODE |
>> +			    RK3288_LVDS_CH0_REG4_LANE3_TTL_MODE |
>> +			    RK3288_LVDS_CH0_REG4_LANE2_TTL_MODE |
>> +			    RK3288_LVDS_CH0_REG4_LANE1_TTL_MODE |
>> +			    RK3288_LVDS_CH0_REG4_LANE0_TTL_MODE);
>> +		lvds_writel(lvds, RK3288_LVDS_CH0_REG5,
>> +			    RK3288_LVDS_CH0_REG5_LANECK_TTL_DATA |
>> +			    RK3288_LVDS_CH0_REG5_LANE4_TTL_DATA |
>> +			    RK3288_LVDS_CH0_REG5_LANE3_TTL_DATA |
>> +			    RK3288_LVDS_CH0_REG5_LANE2_TTL_DATA |
>> +			    RK3288_LVDS_CH0_REG5_LANE1_TTL_DATA |
>> +			    RK3288_LVDS_CH0_REG5_LANE0_TTL_DATA);
>> +		lvds_writel(lvds, RK3288_LVDS_CH0_REGD,
>> +			    RK3288_LVDS_PLL_PREDIV_REGD(0x0a));
>> +		lvds_writel(lvds, RK3288_LVDS_CH0_REG20,
>> +			    RK3288_LVDS_CH0_REG20_LSB);
>> +	} else {
>> +		lvds_writel(lvds, RK3288_LVDS_CH0_REG0,
>> +			    RK3288_LVDS_CH0_REG0_LVDS_EN |
>> +			    RK3288_LVDS_CH0_REG0_LANECK_EN |
>> +			    RK3288_LVDS_CH0_REG0_LANE4_EN |
>> +			    RK3288_LVDS_CH0_REG0_LANE3_EN |
>> +			    RK3288_LVDS_CH0_REG0_LANE2_EN |
>> +			    RK3288_LVDS_CH0_REG0_LANE1_EN |
>> +			    RK3288_LVDS_CH0_REG0_LANE0_EN);
>> +		lvds_writel(lvds, RK3288_LVDS_CH0_REG1,
>> +			    RK3288_LVDS_CH0_REG1_LANECK_BIAS |
>> +			    RK3288_LVDS_CH0_REG1_LANE4_BIAS |
>> +			    RK3288_LVDS_CH0_REG1_LANE3_BIAS |
>> +			    RK3288_LVDS_CH0_REG1_LANE2_BIAS |
>> +			    RK3288_LVDS_CH0_REG1_LANE1_BIAS |
>> +			    RK3288_LVDS_CH0_REG1_LANE0_BIAS);
>> +		lvds_writel(lvds, RK3288_LVDS_CH0_REG2,
>> +			    RK3288_LVDS_CH0_REG2_RESERVE_ON |
>> +			    RK3288_LVDS_CH0_REG2_LANECK_LVDS_MODE |
>> +			    RK3288_LVDS_CH0_REG2_LANE4_LVDS_MODE |
>> +			    RK3288_LVDS_CH0_REG2_LANE3_LVDS_MODE |
>> +			    RK3288_LVDS_CH0_REG2_LANE2_LVDS_MODE |
>> +			    RK3288_LVDS_CH0_REG2_LANE1_LVDS_MODE |
>> +			    RK3288_LVDS_CH0_REG2_LANE0_LVDS_MODE |
>> +			    RK3288_LVDS_PLL_FBDIV_REG2(0x46));
>> +		lvds_writel(lvds, RK3288_LVDS_CH0_REG3,
>> +			    RK3288_LVDS_PLL_FBDIV_REG3(0x46));
>> +		lvds_writel(lvds, RK3288_LVDS_CH0_REG4, 0x00);
>> +		lvds_writel(lvds, RK3288_LVDS_CH0_REG5, 0x00);
>> +		lvds_writel(lvds, RK3288_LVDS_CH0_REGD,
>> +			    RK3288_LVDS_PLL_PREDIV_REGD(0x0a));
>> +		lvds_writel(lvds, RK3288_LVDS_CH0_REG20,
>> +			    RK3288_LVDS_CH0_REG20_LSB);
> 
> The following register writes can be shared by both branches:
> 
> RK3288_LVDS_CH0_REG0 (aside from the enable bit, but that's easy)
> RK3288_LVDS_CH0_REG3
> RK3288_LVDS_CH0_REGD
> RK3288_LVDS_CH0_REG20
> 
> That should hopefully trim this function down.
> 
I will update at next version.
>> +	}
>> +
>> +	writel(RK3288_LVDS_CFG_REGC_PLL_ENABLE,
>> +	       lvds->regs + RK3288_LVDS_CFG_REGC);
>> +	writel(RK3288_LVDS_CFG_REG21_TX_ENABLE,
>> +	       lvds->regs + RK3288_LVDS_CFG_REG21);
>> +
>> +	return 0;
>> +}
>> +
>> +static void rockchip_lvds_poweroff(struct rockchip_lvds *lvds)
>> +{
>> +	int ret;
>> +
>> +	writel(RK3288_LVDS_CFG_REG21_TX_DISABLE,
>> +	       lvds->regs + RK3288_LVDS_CFG_REG21);
>> +	writel(RK3288_LVDS_CFG_REGC_PLL_DISABLE,
>> +	       lvds->regs + RK3288_LVDS_CFG_REGC);
>> +	ret = regmap_write(lvds->grf,
>> +			   lvds->soc_data->grf_soc_con7, 0xffff8000);
> 
> Can you expand on this value? It's quite magical right now.
> 
I add some detail define for this value at next version.

>> +	if (ret != 0)
>> +		dev_err(lvds->dev, "Could not write to GRF: %d\n", ret);
>> +
>> +	pm_runtime_put(lvds->dev);
>> +	if (lvds->pclk)
>> +		clk_disable(lvds->pclk);
>> +}
>> +
>> +static enum drm_connector_status
>> +rockchip_lvds_connector_detect(struct drm_connector *connector, bool force)
>> +{
>> +	return connector_status_connected;
>> +}
>> +
>> +static void rockchip_lvds_connector_destroy(struct drm_connector *connector)
>> +{
>> +	drm_connector_cleanup(connector);
>> +}
>> +
>> +static const struct drm_connector_funcs rockchip_lvds_connector_funcs = {
>> +	.dpms = drm_atomic_helper_connector_dpms,
>> +	.detect = rockchip_lvds_connector_detect,
>> +	.fill_modes = drm_helper_probe_single_connector_modes,
>> +	.destroy = rockchip_lvds_connector_destroy,
>> +	.reset = drm_atomic_helper_connector_reset,
>> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
>> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> +};
>> +
>> +static int rockchip_lvds_connector_get_modes(struct drm_connector *connector)
>> +{
>> +	struct rockchip_lvds *lvds = connector_to_lvds(connector);
>> +	struct drm_panel *panel = lvds->panel;
>> +
>> +	return panel->funcs->get_modes(panel);
>> +}
>> +
>> +static struct drm_encoder *
>> +rockchip_lvds_connector_best_encoder(struct drm_connector *connector)
>> +{
>> +	struct rockchip_lvds *lvds = connector_to_lvds(connector);
>> +
>> +	return &lvds->encoder;
>> +}
>> +
>> +static enum drm_mode_status rockchip_lvds_connector_mode_valid(
>> +		struct drm_connector *connector,
>> +		struct drm_display_mode *mode)
>> +{
>> +	return MODE_OK;
>> +}
>> +
>> +static const
>> +struct drm_connector_helper_funcs rockchip_lvds_connector_helper_funcs = {
>> +	.get_modes = rockchip_lvds_connector_get_modes,
>> +	.mode_valid = rockchip_lvds_connector_mode_valid,
>> +	.best_encoder = rockchip_lvds_connector_best_encoder,
>> +};
>> +
>> +static void rockchip_lvds_encoder_dpms(struct drm_encoder *encoder, int mode)
> 
> Why are you using dpms mode here? Just implement the functionality directly in
> enable() & disable()
> 
It's inherited from the previous code, this will be move to enable() and 
disable() at next version.

>> +{
>> +	struct rockchip_lvds *lvds = encoder_to_lvds(encoder);
>> +	int ret;
>> +
>> +	mutex_lock(&lvds->suspend_lock);
> 
> What is this lock protecting against? rockchip is using the atomic helper for
> suspend/resume, so locking should be handled in core.
> 
this will be deleted and move to enable()/disable() at next version
>> +
>> +	switch (mode) {
>> +	case DRM_MODE_DPMS_ON:
>> +		if (!lvds->suspend)
> 
> Can we rename this to enabled instead? I assume this is protecting the
> pm_runtime reference?
> 
this will be deleted and move to enable()/disable() at next version
>> +			goto out;
>> +
>> +		drm_panel_prepare(lvds->panel);
>> +		ret = rockchip_lvds_poweron(lvds);
>> +		if (ret < 0) {
>> +			drm_panel_unprepare(lvds->panel);
>> +			goto out;
>> +		}
>> +		drm_panel_enable(lvds->panel);
>> +
>> +		lvds->suspend = false;
>> +		break;
>> +	case DRM_MODE_DPMS_STANDBY:
>> +	case DRM_MODE_DPMS_SUSPEND:
>> +	case DRM_MODE_DPMS_OFF:
>> +		if (lvds->suspend)
>> +			goto out;
>> +
>> +		drm_panel_disable(lvds->panel);
>> +		rockchip_lvds_poweroff(lvds);
>> +		drm_panel_unprepare(lvds->panel);
>> +
>> +		lvds->suspend = true;
>> +		break;
>> +	default:
>> +		break;
>> +	}
>> +
>> +out:
>> +	mutex_unlock(&lvds->suspend_lock);
>> +}
>> +
>> +static bool
>> +rockchip_lvds_encoder_mode_fixup(struct drm_encoder *encoder,
>> +				const struct drm_display_mode *mode,
>> +				struct drm_display_mode *adjusted_mode)
>> +{
>> +	return true;
>> +}
>> +
>> +static void rockchip_lvds_encoder_mode_set(struct drm_encoder *encoder,
>> +					  struct drm_display_mode *mode,
>> +					  struct drm_display_mode *adjusted)
>> +{
>> +	struct rockchip_lvds *lvds = encoder_to_lvds(encoder);
>> +
>> +	drm_mode_copy(&lvds->mode, adjusted);
>> +}
>> +
>> +static void rockchip_lvds_grf_config(struct drm_encoder *encoder,
>> +				     struct drm_display_mode *mode)
>> +{
>> +	struct rockchip_lvds *lvds = encoder_to_lvds(encoder);
>> +	u32 h_bp = mode->htotal - mode->hsync_start;
> 
> No need for the local var, just do the subtraction in () below
> 
Update at next version.

>> +	u8 pin_hsync = (mode->flags & DRM_MODE_FLAG_PHSYNC) ? 1 : 0;
>> +	u8 pin_dclk = (mode->flags & DRM_MODE_FLAG_PCSYNC) ? 1 : 0;
>> +	u32 val;
>> +	int ret;
>> +
>> +	/* iomux to LCD data/sync mode */
>> +	if (lvds->output == DISPLAY_OUTPUT_RGB)
>> +		if (lvds->pins && !IS_ERR(lvds->pins->default_state))
>> +			pinctrl_select_state(lvds->pins->p,
>> +					     lvds->pins->default_state);
>> +	val = lvds->format;
> 
> val = lvds->format | LVDS_CH0_EN;
> 
> then remove LVDS_CH0_EN from below
> 
thanks,I will update at next version.
>> +	if (lvds->output == DISPLAY_OUTPUT_DUAL_LVDS)
>> +		val |= LVDS_DUAL | LVDS_CH0_EN | LVDS_CH1_EN;
>> +	else if (lvds->output == DISPLAY_OUTPUT_LVDS)
>> +		val |= LVDS_CH0_EN;
>> +	else if (lvds->output == DISPLAY_OUTPUT_RGB)
>> +		val |= LVDS_TTL_EN | LVDS_CH0_EN | LVDS_CH1_EN;
>> +
>> +	if (h_bp & 0x01)
>> +		val |= LVDS_START_PHASE_RST_1;
>> +
>> +	val |= (pin_dclk << 8) | (pin_hsync << 9);
>> +	val |= (0xffff << 16);
>> +	ret = regmap_write(lvds->grf, lvds->soc_data->grf_soc_con7, val);
>> +	if (ret != 0) {
>> +		dev_err(lvds->dev, "Could not write to GRF: %d\n", ret);
>> +		return;
>> +	}
>> +}
>> +
>> +static int rockchip_lvds_set_vop_source(struct rockchip_lvds *lvds,
>> +					struct drm_encoder *encoder)
>> +{
>> +	u32 val;
>> +	int ret;
>> +
>> +	if (!lvds->soc_data->has_vop_sel)
>> +		return 0;
>> +
>> +	ret = drm_of_encoder_active_endpoint_id(lvds->dev->of_node, encoder);
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	if (ret)
>> +		val = RK3288_LVDS_SOC_CON6_SEL_VOP_LIT |
>> +		      (RK3288_LVDS_SOC_CON6_SEL_VOP_LIT << 16);
>> +	else
>> +		val = RK3288_LVDS_SOC_CON6_SEL_VOP_LIT << 16;
> 
> 
> val = RK3288_LVDS_SOC_CON6_SEL_VOP_LIT << 16;
> if (ret)
>          val |= RK3288_LVDS_SOC_CON6_SEL_VOP_LIT;
> 
Update at next version.
>> +
>> +	ret = regmap_write(lvds->grf, lvds->soc_data->grf_soc_con6, val);
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	return 0;
>> +}
>> +
>> +static int
>> +rockchip_lvds_encoder_atomic_check(struct drm_encoder *encoder,
>> +				   struct drm_crtc_state *crtc_state,
>> +				   struct drm_connector_state *conn_state)
>> +{
>> +	struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
>> +
>> +
> 
> nit: extra line
> 
Update at next version.
>> +	s->output_mode = ROCKCHIP_OUT_MODE_P888;
>> +	s->output_type = DRM_MODE_CONNECTOR_LVDS;
>> +
>> +
>> +	return 0;
>> +}
>> +
>> +static void rockchip_lvds_encoder_enable(struct drm_encoder *encoder)
>> +{
>> +	struct rockchip_lvds *lvds = encoder_to_lvds(encoder);
>> +
>> +	rockchip_lvds_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
>> +	rockchip_lvds_grf_config(encoder, &lvds->mode);
>> +	rockchip_lvds_set_vop_source(lvds, encoder);
>> +}
>> +
>> +static void rockchip_lvds_encoder_disable(struct drm_encoder *encoder)
>> +{
>> +	rockchip_lvds_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
>> +}
>> +
>> +static const
>> +struct drm_encoder_helper_funcs rockchip_lvds_encoder_helper_funcs = {
>> +	.mode_fixup = rockchip_lvds_encoder_mode_fixup,
>> +	.mode_set = rockchip_lvds_encoder_mode_set,
>> +	.enable = rockchip_lvds_encoder_enable,
>> +	.disable = rockchip_lvds_encoder_disable,
>> +	.atomic_check = rockchip_lvds_encoder_atomic_check,
>> +};
>> +
>> +static void rockchip_lvds_encoder_destroy(struct drm_encoder *encoder)
>> +{
>> +	drm_encoder_cleanup(encoder);
>> +}
>> +
>> +static const struct drm_encoder_funcs rockchip_lvds_encoder_funcs = {
>> +	.destroy = rockchip_lvds_encoder_destroy,
>> +};
>> +
>> +static struct rockchip_lvds_soc_data rk3288_lvds_data = {
>> +	.chip_type = RK3288_LVDS,
>> +	.grf_soc_con6 = 0x025c,
>> +	.grf_soc_con7 = 0x0260,
>> +	.has_vop_sel = true,
>> +};
>> +
>> +static const struct of_device_id rockchip_lvds_dt_ids[] = {
>> +	{
>> +		.compatible = "rockchip,rk3288-lvds",
>> +		.data = &rk3288_lvds_data
>> +	},
>> +	{}
>> +};
>> +MODULE_DEVICE_TABLE(of, rockchip_lvds_dt_ids);
>> +
>> +static int rockchip_lvds_bind(struct device *dev, struct device *master,
>> +			     void *data)
>> +{
>> +	struct rockchip_lvds *lvds = dev_get_drvdata(dev);
>> +	struct drm_device *drm_dev = data;
>> +	struct drm_encoder *encoder;
>> +	struct drm_connector *connector;
>> +	struct device_node *remote = NULL;
>> +	struct device_node  *port, *endpoint;
>> +	int ret, i;
> 
> Looks like i is just used to read data-width from dt, can you please rename to
> "width" or similar?
> 
Update to width at next version.
>> +	const char *name;
>> +
>> +	lvds->drm_dev = drm_dev;
>> +	port = of_graph_get_port_by_id(dev->of_node, 1);
>> +	if (!port) {
>> +		dev_err(dev, "can't found port point, please init lvds panel port!\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	for_each_child_of_node(port, endpoint) {
>> +		remote = of_graph_get_remote_port_parent(endpoint);
>> +		if (!remote) {
>> +			dev_err(dev, "can't found panel node, please init!\n");
>> +			ret = -EINVAL;
>> +			goto err_put_port;
>> +		}
>> +		if (!of_device_is_available(remote)) {
>> +			of_node_put(remote);
>> +			remote = NULL;
>> +			continue;
>> +		}
>> +		break;
>> +	}
>> +	if (!remote) {
>> +		dev_err(dev, "can't found remote node, please init!\n");
>> +		ret = -EINVAL;
>> +		goto err_put_port;
>> +	}
>> +
>> +	lvds->panel = of_drm_find_panel(remote);
>> +	if (!lvds->panel)
>> +		lvds->bridge = of_drm_find_bridge(remote);
> 
> drm_of_find_panel_or_bridge()
> 

because the lvds ports maybe connect to lvds-panel or connect to 
rk1000(which is convert RGB to CVBS output), so i have to get the remote 
port parent and check the status, and final get the active remote point.

lvds_panel: lvds-panel {
	status = "disabled";
	ports {
		panel_in_lvds: endpoint {
			remote-endpoint = <&lvds_out_panel>;
		};
	};
};

rk1000: rk1000 at 0xff000000 {
	status = "okay";
	ports {
		rk1000_in_lvds: endpoint {
			remote-endpoint = <&lvds_out_panel>;
		};
	};
};

&lvds {
	status = "okay";
	ports {
		lvds_out: port at 1 {
			reg = <1>;
			lvds_out_panel: endpoint at 0 {
				reg = <0>;
				remote-endpoint = <&panel_in_lvds>;
			};
			lvds_out_rk1000: endpoint at 1 {
				reg = <1>;
				remote-endpoint = <&rk1000_in_lvds>;
			};
		}; 

	};
};
>> +
>> +	if (!lvds->panel && !lvds->bridge) {
>> +		DRM_ERROR("failed to find panel and bridge node\n");
>> +		ret  = -EPROBE_DEFER;
>> +		goto err_put_remote;
>> +	}
>> +
>> +	if (of_property_read_string(remote, "rockchip,output", &name))
>> +		/* default set it as output rgb */
>> +		lvds->output = DISPLAY_OUTPUT_RGB;
>> +	else
>> +		lvds->output = lvds_name_to_output(name);
>> +
>> +	if (lvds->output < 0) {
>> +		dev_err(dev, "invalid output type [%s]\n", name);
>> +		ret = lvds->output;
>> +		goto err_put_remote;
>> +	}
>> +
>> +	if (of_property_read_string(remote, "rockchip,data-mapping",
>> +				    &name))
>> +		/* default set it as format jeida */
>> +		lvds->format = LVDS_FORMAT_JEIDA;
>> +	else
>> +		lvds->format = lvds_name_to_format(name);
>> +
>> +	if (lvds->format < 0) {
>> +		dev_err(dev, "invalid data-mapping format [%s]\n", name);
>> +		ret = lvds->format;
>> +		goto err_put_remote;
>> +	}
>> +
>> +	if (of_property_read_u32(remote, "rockchip,data-width", &i)) {
>> +		lvds->format |= LVDS_24BIT;
>> +	} else {
>> +		if (i == 24) {
>> +			lvds->format |= LVDS_24BIT;
>> +		} else if (i == 18) {
>> +			lvds->format |= LVDS_18BIT;
>> +		} else {
>> +			dev_err(dev,
>> +				"rockchip-lvds unsupport data-width[%d]\n", i);
>> +			ret = -EINVAL;
>> +			goto err_put_remote;
>> +		}
>> +	}
>> +
>> +	encoder = &lvds->encoder;
>> +	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
>> +							     dev->of_node);
>> +
>> +	ret = drm_encoder_init(drm_dev, encoder, &rockchip_lvds_encoder_funcs,
>> +			       DRM_MODE_ENCODER_LVDS, NULL);
>> +	if (ret < 0) {
>> +		DRM_ERROR("failed to initialize encoder with drm\n");
> 
> Here and below you switched to DRM_ERROR (instead of dev_err) and you don't
> print the ret values. Can you please change to DRM_DEV_ERROR and print ret when
> exiting?
> 
update at next version.
>> +		goto err_put_remote;
>> +	}
>> +
>> +	drm_encoder_helper_add(encoder, &rockchip_lvds_encoder_helper_funcs);
>> +
>> +	if (lvds->panel) {
>> +		connector = &lvds->connector;
>> +		connector->dpms = DRM_MODE_DPMS_OFF;
>> +		ret = drm_connector_init(drm_dev, connector,
>> +					 &rockchip_lvds_connector_funcs,
>> +					 DRM_MODE_CONNECTOR_LVDS);
>> +		if (ret < 0) {
>> +			DRM_ERROR("failed to initialize connector with drm\n");
>> +			goto err_free_encoder;
>> +		}
>> +
>> +		drm_connector_helper_add(connector,
>> +					 &rockchip_lvds_connector_helper_funcs);
>> +
>> +		ret = drm_mode_connector_attach_encoder(connector, encoder);
>> +		if (ret < 0) {
>> +			DRM_ERROR("failed to attach connector and encoder\n");
>> +			goto err_free_connector;
>> +		}
>> +
>> +		ret = drm_panel_attach(lvds->panel, connector);
>> +		if (ret < 0) {
>> +			DRM_ERROR("failed to attach connector and encoder\n");
>> +			goto err_free_connector;
>> +		}
>> +	} else {
>> +		lvds->bridge->encoder = encoder;
>> +		ret = drm_bridge_attach(encoder, lvds->bridge, NULL);
>> +		if (ret) {
>> +			DRM_ERROR("Failed to attach bridge to drm\n");
>> +			goto err_free_encoder;
>> +		}
>> +		encoder->bridge = lvds->bridge;
>> +	}
>> +
>> +	pm_runtime_enable(dev);
>> +	of_node_put(remote);
>> +	of_node_put(port);
>> +
>> +	return 0;
>> +
>> +err_free_connector:
>> +	drm_connector_cleanup(connector);
>> +err_free_encoder:
>> +	drm_encoder_cleanup(encoder);
>> +err_put_remote:
>> +	of_node_put(remote);
>> +err_put_port:
>> +	of_node_put(port);
>> +
>> +	return ret;
>> +}
>> +
>> +static void rockchip_lvds_unbind(struct device *dev, struct device *master,
>> +				void *data)
>> +{
>> +	struct rockchip_lvds *lvds = dev_get_drvdata(dev);
>> +
>> +	rockchip_lvds_encoder_dpms(&lvds->encoder, DRM_MODE_DPMS_OFF);
>> +
>> +	drm_panel_detach(lvds->panel);
> 
> Oops if lvds->panel is NULL, which will happen if you have a bridge. Speaking of
> which, you're also not handling bridge detach.
> 
thanks,I will fix at next version.

>> +
>> +	drm_connector_cleanup(&lvds->connector);
>> +	drm_encoder_cleanup(&lvds->encoder);
>> +
>> +	pm_runtime_disable(dev);
> 
> This should probably be first if you're rolling back initialization.
> 
thanks,I will fix at next version.
>> +}
>> +
>> +static const struct component_ops rockchip_lvds_component_ops = {
>> +	.bind = rockchip_lvds_bind,
>> +	.unbind = rockchip_lvds_unbind,
>> +};
>> +
>> +static int rockchip_lvds_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct rockchip_lvds *lvds;
>> +	const struct of_device_id *match;
>> +	struct resource *res;
>> +	int ret;
>> +
>> +	if (!dev->of_node)
>> +		return -ENODEV;
>> +
>> +	lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL);
>> +	if (!lvds)
>> +		return -ENOMEM;
>> +
>> +	lvds->dev = dev;
>> +	lvds->suspend = true;
>> +	match = of_match_node(rockchip_lvds_dt_ids, dev->of_node);
> 
> match can be NULL and you dereference it on the next line
> 
thanks,I will fix at next version.
>> +	lvds->soc_data = match->data;
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	lvds->regs = devm_ioremap_resource(&pdev->dev, res);
>> +	if (IS_ERR(lvds->regs))
>> +		return PTR_ERR(lvds->regs);
>> +
>> +	lvds->pclk = devm_clk_get(&pdev->dev, "pclk_lvds");
>> +	if (IS_ERR(lvds->pclk)) {
>> +		dev_err(dev, "could not get pclk_lvds\n");
>> +		return PTR_ERR(lvds->pclk);
>> +	}
>> +
>> +	lvds->pins = devm_kzalloc(lvds->dev, sizeof(*lvds->pins),
>> +				  GFP_KERNEL);
>> +	if (!lvds->pins)
>> +		return -ENOMEM;
>> +
>> +	lvds->pins->p = devm_pinctrl_get(lvds->dev);
>> +	if (IS_ERR(lvds->pins->p)) {
>> +		dev_info(lvds->dev, "no pinctrl handle\n");
>> +		devm_kfree(lvds->dev, lvds->pins);
>> +		lvds->pins = NULL;
>> +	} else {
>> +		lvds->pins->default_state =
>> +			pinctrl_lookup_state(lvds->pins->p, "lcdc");
>> +		if (IS_ERR(lvds->pins->default_state)) {
>> +			dev_info(lvds->dev, "no default pinctrl state\n");
>> +			devm_kfree(lvds->dev, lvds->pins);
>> +			lvds->pins = NULL;
>> +		}
>> +	}
>> +
>> +	lvds->grf = syscon_regmap_lookup_by_phandle(dev->of_node,
>> +						    "rockchip,grf");
>> +	if (IS_ERR(lvds->grf)) {
>> +		dev_err(dev, "missing rockchip,grf property\n");
>> +		return PTR_ERR(lvds->grf);
>> +	}
>> +
>> +	dev_set_drvdata(dev, lvds);
>> +	mutex_init(&lvds->suspend_lock);
>> +
>> +	if (lvds->pclk) {
>> +		ret = clk_prepare(lvds->pclk);
>> +		if (ret < 0) {
>> +			dev_err(dev, "failed to prepare pclk_lvds\n");
>> +			return ret;
>> +		}
>> +	}
>> +	ret = component_add(&pdev->dev, &rockchip_lvds_component_ops);
>> +	if (ret < 0) {
>> +		if (lvds->pclk)
>> +			clk_unprepare(lvds->pclk);
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static int rockchip_lvds_remove(struct platform_device *pdev)
>> +{
>> +	struct rockchip_lvds *lvds = dev_get_drvdata(&pdev->dev);
>> +
>> +	component_del(&pdev->dev, &rockchip_lvds_component_ops);
>> +	if (lvds->pclk)
>> +		clk_unprepare(lvds->pclk);
>> +
>> +	return 0;
>> +}
>> +
>> +struct platform_driver rockchip_lvds_driver = {
>> +	.probe = rockchip_lvds_probe,
>> +	.remove = rockchip_lvds_remove,
>> +	.driver = {
>> +		   .name = "rockchip-lvds",
>> +		   .of_match_table = of_match_ptr(rockchip_lvds_dt_ids),
>> +	},
>> +};
>> diff --git a/drivers/gpu/drm/rockchip/rockchip_lvds.h b/drivers/gpu/drm/rockchip/rockchip_lvds.h
>> new file mode 100644
>> index 0000000..49d2422
>> --- /dev/null
>> +++ b/drivers/gpu/drm/rockchip/rockchip_lvds.h
>> @@ -0,0 +1,112 @@
>> +/*
>> + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
>> + * Author:
>> + *      hjc <hjc at rock-chips.com>
>> + *      mark yao <mark.yao at rock-chips.com>
>> + *
>> + * This software is licensed under the terms of the GNU General Public
>> + * License version 2, as published by the Free Software Foundation, and
>> + * may be copied, distributed, and modified under those terms.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef _ROCKCHIP_LVDS_
>> +#define _ROCKCHIP_LVDS_
>> +
>> +#define RK3288_LVDS_CH0_REG0			0x00
>> +#define RK3288_LVDS_CH0_REG0_LVDS_EN		BIT(7)
>> +#define RK3288_LVDS_CH0_REG0_TTL_EN		BIT(6)
>> +#define RK3288_LVDS_CH0_REG0_LANECK_EN		BIT(5)
>> +#define RK3288_LVDS_CH0_REG0_LANE4_EN		BIT(4)
>> +#define RK3288_LVDS_CH0_REG0_LANE3_EN		BIT(3)
>> +#define RK3288_LVDS_CH0_REG0_LANE2_EN		BIT(2)
>> +#define RK3288_LVDS_CH0_REG0_LANE1_EN		BIT(1)
>> +#define RK3288_LVDS_CH0_REG0_LANE0_EN		BIT(0)
>> +
>> +#define RK3288_LVDS_CH0_REG1			0x04
>> +#define RK3288_LVDS_CH0_REG1_LANECK_BIAS	BIT(5)
>> +#define RK3288_LVDS_CH0_REG1_LANE4_BIAS		BIT(4)
>> +#define RK3288_LVDS_CH0_REG1_LANE3_BIAS		BIT(3)
>> +#define RK3288_LVDS_CH0_REG1_LANE2_BIAS		BIT(2)
>> +#define RK3288_LVDS_CH0_REG1_LANE1_BIAS		BIT(1)
>> +#define RK3288_LVDS_CH0_REG1_LANE0_BIAS		BIT(0)
>> +
>> +#define RK3288_LVDS_CH0_REG2			0x08
>> +#define RK3288_LVDS_CH0_REG2_RESERVE_ON		BIT(7)
>> +#define RK3288_LVDS_CH0_REG2_LANECK_LVDS_MODE	BIT(6)
>> +#define RK3288_LVDS_CH0_REG2_LANE4_LVDS_MODE	BIT(5)
>> +#define RK3288_LVDS_CH0_REG2_LANE3_LVDS_MODE	BIT(4)
>> +#define RK3288_LVDS_CH0_REG2_LANE2_LVDS_MODE	BIT(3)
>> +#define RK3288_LVDS_CH0_REG2_LANE1_LVDS_MODE	BIT(2)
>> +#define RK3288_LVDS_CH0_REG2_LANE0_LVDS_MODE	BIT(1)
>> +#define RK3288_LVDS_CH0_REG2_PLL_FBDIV8		BIT(0)
>> +
>> +#define RK3288_LVDS_CH0_REG3			0x0c
>> +#define RK3288_LVDS_CH0_REG3_PLL_FBDIV_MASK	0xff
>> +
>> +#define RK3288_LVDS_CH0_REG4			0x10
>> +#define RK3288_LVDS_CH0_REG4_LANECK_TTL_MODE	BIT(5)
>> +#define RK3288_LVDS_CH0_REG4_LANE4_TTL_MODE	BIT(4)
>> +#define RK3288_LVDS_CH0_REG4_LANE3_TTL_MODE	BIT(3)
>> +#define RK3288_LVDS_CH0_REG4_LANE2_TTL_MODE	BIT(2)
>> +#define RK3288_LVDS_CH0_REG4_LANE1_TTL_MODE	BIT(1)
>> +#define RK3288_LVDS_CH0_REG4_LANE0_TTL_MODE	BIT(0)
>> +
>> +#define RK3288_LVDS_CH0_REG5			0x14
>> +#define RK3288_LVDS_CH0_REG5_LANECK_TTL_DATA	BIT(5)
>> +#define RK3288_LVDS_CH0_REG5_LANE4_TTL_DATA	BIT(4)
>> +#define RK3288_LVDS_CH0_REG5_LANE3_TTL_DATA	BIT(3)
>> +#define RK3288_LVDS_CH0_REG5_LANE2_TTL_DATA	BIT(2)
>> +#define RK3288_LVDS_CH0_REG5_LANE1_TTL_DATA	BIT(1)
>> +#define RK3288_LVDS_CH0_REG5_LANE0_TTL_DATA	BIT(0)
>> +
>> +#define RK3288_LVDS_CFG_REGC			0x30
>> +#define RK3288_LVDS_CFG_REGC_PLL_ENABLE		0x00
>> +#define RK3288_LVDS_CFG_REGC_PLL_DISABLE	0xff
>> +
>> +#define RK3288_LVDS_CH0_REGD			0x34
>> +#define RK3288_LVDS_CH0_REGD_PLL_PREDIV_MASK	0x1f
>> +
>> +#define RK3288_LVDS_CH0_REG20			0x80
>> +#define RK3288_LVDS_CH0_REG20_MSB		0x45
>> +#define RK3288_LVDS_CH0_REG20_LSB		0x44
>> +
>> +#define RK3288_LVDS_CFG_REG21			0x84
>> +#define RK3288_LVDS_CFG_REG21_TX_ENABLE		0x92
>> +#define RK3288_LVDS_CFG_REG21_TX_DISABLE	0x00
>> +#define RK3288_LVDS_CH1_OFFSET                 0x100
>> +
>> +/* fbdiv value is split over 2 registers, with bit8 in reg2 */
>> +#define RK3288_LVDS_PLL_FBDIV_REG2(_fbd) \
>> +		(_fbd & BIT(8) ? RK3288_LVDS_CH0_REG2_PLL_FBDIV8 : 0)
>> +#define RK3288_LVDS_PLL_FBDIV_REG3(_fbd) \
>> +		(_fbd & RK3288_LVDS_CH0_REG3_PLL_FBDIV_MASK)
>> +#define RK3288_LVDS_PLL_PREDIV_REGD(_pd) \
>> +		(_pd & RK3288_LVDS_CH0_REGD_PLL_PREDIV_MASK)
>> +
>> +#define RK3288_LVDS_SOC_CON6_SEL_VOP_LIT	BIT(3)
>> +
>> +#define LVDS_FMT_MASK				(0x07 << 16)
>> +#define LVDS_MSB				BIT(3)
>> +#define LVDS_DUAL				BIT(4)
>> +#define LVDS_FMT_1				BIT(5)
>> +#define LVDS_TTL_EN				BIT(6)
>> +#define LVDS_START_PHASE_RST_1			BIT(7)
>> +#define LVDS_DCLK_INV				BIT(8)
>> +#define LVDS_CH0_EN				BIT(11)
>> +#define LVDS_CH1_EN				BIT(12)
>> +#define LVDS_PWRDN				BIT(15)
>> +
>> +#define LVDS_24BIT				(0 << 1)
>> +#define LVDS_18BIT				(1 << 1)
>> +#define LVDS_FORMAT_VESA			(0 << 0)
>> +#define LVDS_FORMAT_JEIDA			(1 << 0)
>> +
>> +enum rockchip_lvds_sub_devtype {
>> +	RK3288_LVDS,
>> +};
>> +#endif /* _ROCKCHIP_LVDS_ */
>> -- 
>> 2.7.4
>>
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 

-- 
Best Regard

黄家钗
Sandy Huang
福州瑞芯微电子股份有限公司-图形与显示系统部门
Fuzhou Rockchip Electronics Co.Ltd - Graphics & Display Dept.
Addr: 福州市鼓楼区铜盘路软件大道89号福州软件园A区21号楼(350003)
          No. 21 Building, A District, No.89,software Boulevard 
Fuzhou,Fujian,PRC
Tel:+86 0591-87884919  8690
E-mail:hjc at rock-chips.com




More information about the Linux-rockchip mailing list