rk3288: mmcblk0: error -110 sending status command, retrying

[Jagan Teki]

On Thu, Aug 3, 2017 at 12:08 AM, Diego Roversi <diegor at tiscali.it> wrote:
> On Wed, 2 Aug 2017 16:39:50 +0530
> Jagan Teki <jagannadh.teki at gmail.com> wrote:
>
>> Hi,
>>
>> Did anyone observing error -110 and -84 during boot on rk3288 target?
>> full log here[1] and used dts node is[2].
>>
>> Proper card detection is done, once we insert after console came-up
>> # [   39.635614] mmc0: card 59b4 removed
>> [   40.645537] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req
>> 400000Hz, actual 400000HZ div = 0)
>> [   41.004559] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot
>> req 50000000Hz, actual 50000000HZ div = 0)
>> [   41.015553] mmc0: new high speed SDXC card at address 59b4
>> [   41.022015] mmcblk0: mmc0:59b4 MS    59.1 GiB
>> [   41.028458]  mmcblk0: p1 p2
>
> If I remember well I've seen the same error with my firefly rk3288 , with kernel 4.9 and kernel 4.11 from debian. Atm I'm using 4.12.0-12921-g235b84fc86, cloned by mmind's git repository[1], and I don't see this error anymore.

Can you point me the branch or SHA1 tried v4.12 and v4.13-* but result same.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.