[PATCH v1 1/2] ARM: dts: add rockchip PX3 Evaluation board

Andreas Färber afaerber at suse.de
Tue Sep 13 05:14:01 PDT 2016


Hi Andy,

This patch didn't make it to linux-rockchip list somehow...
Not sure why I'm CC'ed, I don't have access to such a board to check, so
just a couple formal nitpicks:

Am 10.09.2016 um 19:44 schrieb Andy Yan:
> PX3 EVB is designed by Rockchip for automotive field,
> which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI

"integrated"
but the grammar is somewhat incorrect with "which" referring to field -
I assume you meant "with integrated CVBS..."?

> video input/output interface, WIFI/BT/GPS(on a module

Also please always leave a space before an opening parenthesis in
English text. Similarly above, spaces around "/" would help recognize
that MIPI DSI belongs together rather than being two lists.

If nothing else applies below then maybe Heiko can edit it for you?

> named S500 which based on MT6620), Gsensor BMA250E and
> light&proximity sensor STK3410.
> 
> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
> 
> ---
> 
> Changes in v1:
> - board rename
> - add vendor prefix for i2c interfaced sensors
> - use stdout-path to set the default console
> 
>  Documentation/devicetree/bindings/arm/rockchip.txt |   4 +
>  arch/arm/boot/dts/Makefile                         |   1 +
>  arch/arm/boot/dts/rk3188-px3-evb.dts               | 337 +++++++++++++++++++++
>  3 files changed, 342 insertions(+)
>  create mode 100644 arch/arm/boot/dts/rk3188-px3-evb.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
> index 6668645..6da3881 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> @@ -21,6 +21,10 @@ Rockchip platforms device tree bindings
>      Required root node properties:
>        - compatible = "radxa,rock", "rockchip,rk3188";
>  
> +- Rockchip PX3 Evaluation board:
> +    Required root node properties:
> +      - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";

How compatible is PX3 with RK3188? It is a separate SoC product:

http://www.rock-chips.com/a/en/products/rkpower/2015/1125/730.html

Wondering whether or not to drop the third compatible string.

> +
>  - Radxa Rock2 Square board:
>      Required root node properties:
>        - compatible = "radxa,rock2-square", "rockchip,rk3288";
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index faacd52..88d27a2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -620,6 +620,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
>  	rk3066a-marsboard.dtb \
>  	rk3066a-rayeager.dtb \
>  	rk3188-radxarock.dtb \
> +	rk3188-px3-evb.dtb \

Affects file naming as well: px3-evb.dtb?

>  	rk3228-evb.dtb \
>  	rk3229-evb.dtb \
>  	rk3288-evb-act8846.dtb \
> diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
> new file mode 100644
> index 0000000..f6bc738
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
> @@ -0,0 +1,337 @@
> +/*
> + * Copyright (c) 2016 Andy Yan <andy.yan at rock-chips.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/input.h>
> +#include "rk3188.dtsi"

I'm surprised there is no [rk3188-]px3.dtsi here! Surely some automotive
vendor may design their own board with it and should have at least the
two trailing compatible strings pre-set.

> +
> +/ {
> +	model = "Rockchip PX3-EVB";
> +	compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
> +
> +	chosen {
> +		stdout-path = "serial2:115200n8";
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x60000000 0x80000000>;
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		autorepeat;
> +
> +		power {
> +			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_POWER>;
> +			label = "GPIO Key Power";
> +			linux,input-type = <1>;
> +			wakeup-source;
> +			debounce-interval = <100>;
> +		};
> +	};
> +
> +	vcc_sys: vsys-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vsys";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-boot-on;
> +	};
> +};
> +
> +&cpu0 {
> +	cpu0-supply = <&vdd_cpu>;
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +
> +	 /* Accelerometer */

Space after tab intentional?

> +	bma250 at 18 {
> +		compatible = "bosch,bma250";
> +		reg = <0x18>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +
> +	stk3410 at 48 {
> +		compatible = "sensortek,STK3310";
> +		reg = <0x48>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> +	};

Generally it is undesired to repeat the compatible name as node name -
did you compare other .dts files? (e.g., accelerometer at 18 would be
self-documenting) If this is a copy from an existing .dts then please
ignore this comment.

> +};
> +
> +&i2c1 {
> +	status = "okay";
> +	clock-frequency = <400000>;

Insert white line?

> +	rk808: pmic at 1c {
> +		compatible = "rockchip,rk818";
> +		reg = <0x1c>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
> +		rockchip,system-power-controller;
> +		wakeup-source;
> +		#clock-cells = <1>;
> +		clock-output-names = "xin32k", "rk808-clkout2";
> +
> +		vcc1-supply = <&vcc_sys>;
> +		vcc2-supply = <&vcc_sys>;
> +		vcc3-supply = <&vcc_sys>;
> +		vcc4-supply = <&vcc_sys>;
> +		vcc6-supply = <&vcc_sys>;
> +		vcc7-supply = <&vcc_sys>;
> +		vcc8-supply = <&vcc_io>;
> +		vcc9-supply = <&vcc_io>;
> +
> +		regulators {
> +			vdd_cpu: DCDC_REG1 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-name = "vdd_arm";
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_gpu: DCDC_REG2 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <1250000>;
> +				regulator-name = "vdd_gpu";
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1000000>;
> +				};
> +			};
> +
> +			vcc_ddr: DCDC_REG3 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-name = "vcc_ddr";
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			vcc_io: DCDC_REG4 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-name = "vcc_io";
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vcc_cif: LDO_REG1 {
> +				 regulator-min-microvolt = <3300000>;
> +				 regulator-max-microvolt = <3300000>;
> +				 regulator-name = "vcc_cif";
> +			};
> +
> +			vcc_jetta33: LDO_REG2 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-name = "vcc_jetta33";
> +			};
> +
> +			vdd_10: LDO_REG3 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <1000000>;
> +				regulator-name = "vdd_10";
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1000000>;
> +				};
> +			};
> +
> +			lvds_12: LDO_REG4 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-name = "lvds_12";
> +			};
> +
> +			lvds_25: LDO_REG5 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-name = "lvds_25";
> +			};
> +
> +			cif_18: LDO_REG6 {
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <1000000>;
> +				regulator-name = "cif_18";
> +			};
> +
> +			vcc_sd: LDO_REG7 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-name = "vcc_sd";
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			wl_18: LDO_REG8 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-name = "wl_18";
> +			};
> +
> +			lcd_33: SWITCH_REG1 {
> +				regulator-name = "lcd_33";
> +			};
> +		};
> +	};
> +
> +};
> +
> +&i2c2 {
> +	gsl1680: touchscreen at 40 {
> +		compatible = "silead,gsl1680";
> +		reg = <0x40>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
> +		power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
> +		touchscreen-size-x = <800>;
> +		touchscreen-size-y = <1280>;
> +		silead,max-fingers = <5>;
> +	};
> +};
> +
> +&emmc {
> +	bus-width = <8>;
> +	cap-mmc-highspeed;
> +	disable-wp;
> +	non-removable;
> +	num-slots = <1>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
> +	status = "okay";
> +};
> +
> +&mmc0 {
> +	num-slots = <1>;
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
> +	vmmc-supply = <&vcc_sd>;
> +
> +	bus-width = <4>;
> +	cap-mmc-highspeed;
> +	cap-sd-highspeed;
> +	disable-wp;
> +};
> +
> +&pwm1 {
> +	status = "okay";
> +};
> +
> +&pwm2 {
> +	status = "okay";
> +};
> +
> +&pwm3 {
> +	status = "okay";
> +};
> +
> +&pinctrl {
> +	pcfg_output_low: pcfg-output-low {
> +		output-low;
> +	};
> +
> +	usb {
> +		host_vbus_drv: host-vbus-drv {
> +			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +		otg_vbus_drv: otg-vbus-drv {
> +			rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> +
> +&uart3 {
> +	status = "okay";
> +};
> +
> +&usbphy {
> +	status = "okay";
> +};
> +
> +&usb_host {
> +	status = "okay";
> +};
> +
> +&usb_otg {
> +	status = "okay";
> +};
> +
> +&wdt {
> +	status = "okay";
> +};

Otherwise formally looks fine.

Cheers,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)



More information about the Linux-rockchip mailing list