[RESEND PATCH v7 4/4] ARM: dts: rockchip: Point rk3288 dwc2 usb at the full PHY reset

Randy Li ayaka at soulik.info
Fri Sep 9 11:59:40 PDT 2016


The "host1" port (AKA the dwc2 port that isn't the OTG port) on rk3288
has a hardware errata that causes everything to get confused when we get
a remote wakeup.  We'll use the reset that's in the CRU to reset the
port when it's in a bad state.

Note that we add the reset to both dwc2 controllers even though only one
has the errata in case we find some other use for this reset that's
unrelated to the current hardware errata.  Only the host port gets the
quirk property, though.

Signed-off-by: Randy Li <ayaka at soulik.info>
---
 arch/arm/boot/dts/rk3288.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 17ec2e2..34de803 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -857,6 +857,8 @@
 				clocks = <&cru SCLK_OTGPHY0>;
 				clock-names = "phyclk";
 				#clock-cells = <0>;
+				resets = <&cru SRST_USBOTG_PHY>;
+				reset-names = "phy-reset";
 			};
 
 			usbphy1: usb-phy at 334 {
@@ -873,6 +875,8 @@
 				clocks = <&cru SCLK_OTGPHY2>;
 				clock-names = "phyclk";
 				#clock-cells = <0>;
+				resets = <&cru SRST_USBHOST1_PHY>;
+				reset-names = "phy-reset";
 			};
 		};
 	};
-- 
2.7.4




More information about the Linux-rockchip mailing list