[PATCH 2/6] pinctrl: rockchip: add support for rk1108

Andy Yan andy.yan at rock-chips.com
Sat Nov 12 23:24:21 PST 2016


Hi Heiko, Jacob:


On 2016年11月13日 05:44, Heiko Stübner wrote:
> Hi Jacob,
>
> Am Sonntag, 13. November 2016, 01:41:21 schrieb 陈豪:
>> 2016-11-03 20:34 GMT+08:00 Andy Yan <andy.yan at rock-chips.com>:
>>> Add basic support for rk1108 soc
>>>
>>> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
>>> ---
>>>
>>>   drivers/pinctrl/pinctrl-rockchip.c | 27 ++++++++++++++++++++++++++-
>>>   1 file changed, 26 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/pinctrl/pinctrl-rockchip.c
>>> b/drivers/pinctrl/pinctrl-rockchip.c index 49bf7dc..9f324b1 100644
>>> --- a/drivers/pinctrl/pinctrl-rockchip.c
>>> +++ b/drivers/pinctrl/pinctrl-rockchip.c
>>> @@ -59,6 +59,7 @@
>>>
>>>   #define GPIO_LS_SYNC           0x60
>>>   
>>>   enum rockchip_pinctrl_type {
>>>
>>> +       RK1108,
>>>
>>>          RK2928,
>>>          RK3066B,
>>>          RK3188,
>>>
>>> @@ -1123,6 +1124,7 @@ static int rockchip_get_pull(struct
>>> rockchip_pin_bank *bank, int pin_num)>
>>>                  return !(data & BIT(bit))
>>>                  
>>>                                  ? PIN_CONFIG_BIAS_PULL_PIN_DEFAULT
>>>                                  
>>>                                  : PIN_CONFIG_BIAS_DISABLE;
>>>
>>> +       case RK1108:
>>>          case RK3188:
>>>          case RK3288:
>>>
>>>          case RK3368:
>>> @@ -1169,6 +1171,7 @@ static int rockchip_set_pull(struct
>>> rockchip_pin_bank *bank,>
>>>                  spin_unlock_irqrestore(&bank->slock, flags);
>>>                  break;
>>>
>>> +       case RK1108:
>>>          case RK3188:
>>>          case RK3288:
>>>
>>>          case RK3368:
>>> @@ -1358,6 +1361,7 @@ static bool rockchip_pinconf_pull_valid(struct
>>> rockchip_pin_ctrl *ctrl,>
>>>                                          pull == PIN_CONFIG_BIAS_DISABLE);
>>>          
>>>          case RK3066B:
>>>                  return pull ? false : true;
>>>
>>> +       case RK1108:
>>>          case RK3188:
>>>          case RK3288:
>>>
>>>          case RK3368:
>>> @@ -1385,7 +1389,6 @@ static int rockchip_pinconf_set(struct pinctrl_dev
>>> *pctldev, unsigned int pin,>
>>>          for (i = 0; i < num_configs; i++) {
>>>          
>>>                  param = pinconf_to_config_param(configs[i]);
>>>                  arg = pinconf_to_config_argument(configs[i]);
>>>
>>> -
>>>
>>>                  switch (param) {
>>>                  
>>>                  case PIN_CONFIG_BIAS_DISABLE:
>>>                          rc =  rockchip_set_pull(bank, pin -
>>>                          bank->pin_base,
>>>
>>> @@ -2455,6 +2458,26 @@ static int rockchip_pinctrl_probe(struct
>>> platform_device *pdev)>
>>>          return 0;
>>>   
>>>   }
>>>
>>> +static struct rockchip_pin_bank rk1108_pin_banks[] = {
>>> +       PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
>>> +                                            IOMUX_SOURCE_PMU,
>>> +                                            IOMUX_SOURCE_PMU,
>>> +                                            IOMUX_SOURCE_PMU),
>>> +       PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0),
>>> +       PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, 0),
>>> +       PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, 0),
>>> +};
>>> +
>>> +static struct rockchip_pin_ctrl rk1108_pin_ctrl = {
>>> +       .pin_banks              = rk1108_pin_banks,
>>> +       .nr_banks               = ARRAY_SIZE(rk1108_pin_banks),
>>> +       .label                  = "RK1108-GPIO",
>>> +       .type                   = RK1108,
>>> +       .grf_mux_offset         = 0x10,
>>> +       .pmu_mux_offset         = 0x0,
>>> +       .pull_calc_reg          = rk3288_calc_pull_reg_and_bit,
>>> +};
>>> +com
>>>
>>>   static struct rockchip_pin_bank rk2928_pin_banks[] = {
>>>   
>>>          PIN_BANK(0, 32, "gpio0"),
>>>          PIN_BANK(1, 32, "gpio1"),
>>>
>>> @@ -2684,6 +2707,8 @@ static struct rockchip_pin_ctrl rk3399_pin_ctrl = {
>>>
>>>   };
>>>   
>>>   static const struct of_device_id rockchip_pinctrl_dt_match[] = {
>>>
>>> +       { .compatible = "rockchip,rk1108-pinctrl",
>>> +               .data = (void *)&rk1108_pin_ctrl },
>>>
>>>          { .compatible = "rockchip,rk2928-pinctrl",
>>>          
>>>                  .data = (void *)&rk2928_pin_ctrl },
>>>          
>>>          { .compatible = "rockchip,rk3036-pinctrl",
>>>
>>> --
>>> 2.7.4
>> rk3288_calc_pull_reg_and_bit can't be used directly in rk1108.
>> rk1108 have a different PULL_PMU_OFFSET and PULL_OFFSET.
> yes, you're right, the offsets are different, so need a new function.
>
> Andy, when at it, you might also want to include drive-strength functionality?
> It is missing here but from looking at the TRM, it should be pretty easy to
> add, as everything looks similar to what other rockchip socs do.

     I had already found it, it will be fixed in next version.

     Thank you!
>
> Heiko
>
>
>





More information about the Linux-rockchip mailing list