[PATCH 00/30] usb: dwc2: Gadget descriptor DMA and IOT

John Youn johnyoun at synopsys.com
Mon Nov 7 14:39:43 PST 2016

This series implements gadget-side descriptor DMA for the DWC_hsotg

It also includes support for DWC USB IOT controllers which use the
descriptor DMA mode of operation exclusively. These are two new
device-only USB controller IPs based on DWC_hsotg.

Tested on HAPS platform with:
* HSOTG IP version 3.30a
* FS/LS IOT IP version 1.00a
* HS IOT IP version 1.00a

This series should be applied on top of:


John Youn (2):
  usb: dwc2: Deprecate g-use-dma binding
  usb: dwc2: Enable gadget DDMA by default for HAPS

Vahram Aharonyan (25):
  usb: dwc2: Update DMA descriptor structure
  usb: dwc2: gadget: Add descriptor DMA binding
  usb: dwc2: gadget: Add DMA descriptor status quadlet fields
  usb: dwc2: gadget: Enable BNA interrupt in descriptor DMA mode
  usb: dwc2: gadget: Add DMA descriptor chains for EP 0
  usb: dwc2: host: Rename MAX_DMA_DESC_SIZE to HOST_DMA_NBYTES_LIMIT
  usb: dwc2: gadget: Transfer length limit checking for DDMA
  usb: dwc2: gadget: Add DDMA chain pointers to dwc2_hsotg_ep structure
  usb: dwc2: gadget: Add DDMA chain fill and parse functions
  usb: dwc2: gadget: EP 0 specific DDMA programming
  usb: dwc2: gadget: DDMA transfer start and complete
  usb: dwc2: gadget: Fixes for StsPhseRcvd interrupt
  usb: dwc2: gadget: Start DDMA IN status phase in StsPhseRcvd handler
  usb: dwc2: gadget: Enable descriptor DMA mode
  usb: dwc2: gadget: Add DDMA isoc related fields to dwc2_hsotg_ep
  usb: dwc2: gadget: Fill isoc descriptor and start transfer in DDMA
  usb: dwc2: gadget: Add completions for DDMA isoc transfers
  usb: dwc2: gadget: In DDMA keep incompISOOUT and incompISOIN masked
  usb: dwc2: gadget: Add start and complete calls for DDMA ISOC
  usb: dwc2: gadget: Adjust ISOC OUT request's actual len for DDMA
  usb: dwc2: gadget: Adjustments in debug prints
  usb: dwc2: gadget: For DDMA parse setup only after SetUp interrupt
  usb: dwc2: gadget: Correct dwc2_hsotg_ep_stop_xfr() function
  usb: dwc2: gadget: Disable enabled HW endpoint in
  usb: dwc2: Add support of dedicated full-speed PHY interface

Vardan Mikayelyan (3):
  usb: dwc2: gadget: Add IOT device IDs, configure core accordingly
  usb: dwc2: gadget: Program ep0_mps for LS
  usb: dwc2: gadget: Add new core parameter for low speed

 Documentation/devicetree/bindings/usb/dwc2.txt |   6 +-
 arch/arm/boot/dts/rk3036.dtsi                  |   2 +-
 arch/arm/boot/dts/rk3288.dtsi                  |   2 +-
 arch/arm/boot/dts/rk3xxx.dtsi                  |   2 +-
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi      |   2 +-
 arch/arm64/boot/dts/rockchip/rk3368.dtsi       |   2 +-
 drivers/usb/dwc2/core.h                        |  48 ++
 drivers/usb/dwc2/gadget.c                      | 978 ++++++++++++++++++++++---
 drivers/usb/dwc2/hcd.c                         |  12 +-
 drivers/usb/dwc2/hcd.h                         |   2 +-
 drivers/usb/dwc2/hcd_ddma.c                    |  52 +-
 drivers/usb/dwc2/hw.h                          |  48 +-
 drivers/usb/dwc2/params.c                      |  42 +-
 drivers/usb/dwc2/pci.c                         |   3 +-
 14 files changed, 1039 insertions(+), 162 deletions(-)


More information about the Linux-rockchip mailing list