[PATCH v2 1/2] Documentation: bindings: add dt documentation for Rockchip PCIe PHY

Shawn Lin shawn.lin at rock-chips.com
Mon Jun 13 17:44:32 PDT 2016


This patch adds a binding that describes the Rockchip PCIe PHY
found on Rockchip SoCs PCIe interface.

Signed-off-by: Shawn Lin <shawn.lin at rock-chips.com>

---

Changes in v2:
- add clk and reset description
- remove unit-address

 .../devicetree/bindings/phy/rockchip-pcie-phy.txt  | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
new file mode 100644
index 0000000..ad55c67
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
@@ -0,0 +1,32 @@
+Rockchip PCIE PHY
+-----------------------
+
+Required properties:
+ - compatible: rockchip,rk3399-pcie-phy
+ - #phy-cells: must be 0
+ - clocks: Must contain an entry in clock-names.
+	See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must be "refclk"
+ - resets: Must contain an entry in reset-names.
+	See ../reset/reset.txt for details.
+ - reset-names: Must be "phy"
+
+Example:
+
+grf: syscon at ff770000 {
+	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	...
+
+	pcie-phy: phy {
+		compatible = "rockchip,rk3399-pcie-phy";
+		#phy-cells = <0>;
+		clocks = <&cru SCLK_PCIEPHY_REF>;
+		clock-names = "refclk";
+		resets = <&cru SRST_PCIEPHY>;
+		reset-names = "phy";
+	};
+};
+
-- 
2.3.7





More information about the Linux-rockchip mailing list