[PATCH v5 2/2] phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy

Frank Wang frank.wang at rock-chips.com
Sun Jun 12 19:10:10 PDT 2016


The newer SoCs (rk3366, rk3399) take a different usb-phy IP block
than rk3288 and before, and most of phy-related registers are also
different from the past, so a new phy driver is required necessarily.

Signed-off-by: Frank Wang <frank.wang at rock-chips.com>
---

Changes in v5:
 - Added 'reg' in the data block to match the different phy-blocks in dt.

Changes in v4:
 - Removed some processes related to 'vbus_host-supply'.

Changes in v3:
 - Resolved the mapping defect between fixed value in driver and the property
   in devicetree.
 - Optimized 480m output clock register function.
 - Code cleanup.

Changes in v2:
 - Changed vbus_host operation from gpio to regulator in *_probe.
 - Improved the fault treatment relate to 480m clock register.
 - Cleaned up some meaningless codes in *_clk480m_disable.
 - made more clear the comment of *_sm_work.

 drivers/phy/Kconfig                  |    7 +
 drivers/phy/Makefile                 |    1 +
 drivers/phy/phy-rockchip-inno-usb2.c |  645 ++++++++++++++++++++++++++++++++++
 3 files changed, 653 insertions(+)
 create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index b869b98..29ef15c 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -347,6 +347,13 @@ config PHY_ROCKCHIP_USB
 	help
 	  Enable this to support the Rockchip USB 2.0 PHY.
 
+config PHY_ROCKCHIP_INNO_USB2
+	tristate "Rockchip INNO USB2PHY Driver"
+	depends on ARCH_ROCKCHIP && OF
+	select GENERIC_PHY
+	help
+	  Support for Rockchip USB2.0 PHY with Innosilicon IP block.
+
 config PHY_ROCKCHIP_EMMC
 	tristate "Rockchip EMMC PHY Driver"
 	depends on ARCH_ROCKCHIP && OF
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 9c3e73c..4963fbc 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -38,6 +38,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
 obj-$(CONFIG_PHY_EXYNOS5_USBDRD)	+= phy-exynos5-usbdrd.o
 obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
 obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
 obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c
new file mode 100644
index 0000000..fc599c7
--- /dev/null
+++ b/drivers/phy/phy-rockchip-inno-usb2.c
@@ -0,0 +1,645 @@
+/*
+ * Rockchip USB2.0 PHY with Innosilicon IP block driver
+ *
+ * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio/consumer.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#define BIT_WRITEABLE_SHIFT	16
+#define SCHEDULE_DELAY	(60 * HZ)
+
+enum rockchip_usb2phy_port_id {
+	USB2PHY_PORT_OTG,
+	USB2PHY_PORT_HOST,
+	USB2PHY_NUM_PORTS,
+};
+
+enum rockchip_usb2phy_host_state {
+	PHY_STATE_HS_ONLINE	= 0,
+	PHY_STATE_DISCONNECT	= 1,
+	PHY_STATE_HS_CONNECT	= 2,
+	PHY_STATE_FS_CONNECT	= 4,
+};
+
+struct usb2phy_reg {
+	unsigned int	offset;
+	unsigned int	bitend;
+	unsigned int	bitstart;
+	unsigned int	disable;
+	unsigned int	enable;
+};
+
+/**
+ * struct rockchip_usb2phy_port_cfg: usb-phy port configuration.
+ * @phy_sus: phy suspend register.
+ * @ls_det_en: linestate detection enable register.
+ * @ls_det_st: linestate detection state register.
+ * @ls_det_clr: linestate detection clear register.
+ * @utmi_ls: utmi linestate state register.
+ * @utmi_hstdet: utmi host disconnect register.
+ */
+struct rockchip_usb2phy_port_cfg {
+	struct usb2phy_reg	phy_sus;
+	struct usb2phy_reg	ls_det_en;
+	struct usb2phy_reg	ls_det_st;
+	struct usb2phy_reg	ls_det_clr;
+	struct usb2phy_reg	utmi_ls;
+	struct usb2phy_reg	utmi_hstdet;
+};
+
+/**
+ * struct rockchip_usb2phy_cfg: usb-phy configuration.
+ * @reg: the address offset of grf for usb-phy config.
+ * @num_ports: specify how many ports that the phy has.
+ * @clkout_ctl: keep on/turn off output clk of phy.
+ */
+struct rockchip_usb2phy_cfg {
+	unsigned int	reg;
+	unsigned int	num_ports;
+	struct usb2phy_reg	clkout_ctl;
+	const struct rockchip_usb2phy_port_cfg	port_cfgs[USB2PHY_NUM_PORTS];
+};
+
+/**
+ * struct rockchip_usb2phy_port: usb-phy port data.
+ * @port_id: flag for otg port or host port.
+ * @suspended: phy suspended flag.
+ * @ls_irq: IRQ number assigned for linestate detection.
+ * @mutex: for register updating in sm_work.
+ * @sm_work: OTG state machine work.
+ * @phy_cfg: port register configuration, assigned by driver data.
+ */
+struct rockchip_usb2phy_port {
+	struct phy	*phy;
+	unsigned int	port_id;
+	bool		suspended;
+	int		ls_irq;
+	struct mutex	mutex;
+	struct		delayed_work sm_work;
+	const struct	rockchip_usb2phy_port_cfg *port_cfg;
+};
+
+/**
+ * struct rockchip_usb2phy: usb2.0 phy driver data.
+ * @grf: General Register Files regmap.
+ * @clk: clock struct of phy input clk.
+ * @clk480m: clock struct of phy output clk.
+ * @clk_hw: clock struct of phy output clk management.
+ * @phy_cfg: phy register configuration, assigned by driver data.
+ * @ports: phy port instance.
+ */
+struct rockchip_usb2phy {
+	struct device	*dev;
+	struct regmap	*grf;
+	struct clk	*clk;
+	struct clk	*clk480m;
+	struct clk_hw	clk480m_hw;
+	const struct rockchip_usb2phy_cfg	*phy_cfg;
+	struct rockchip_usb2phy_port	ports[USB2PHY_NUM_PORTS];
+};
+
+static inline int property_enable(struct rockchip_usb2phy *rphy,
+				  const struct usb2phy_reg *reg, bool en)
+{
+	unsigned int val, mask, tmp;
+
+	tmp = en ? reg->enable : reg->disable;
+	mask = GENMASK(reg->bitend, reg->bitstart);
+	val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
+
+	return regmap_write(rphy->grf, reg->offset, val);
+}
+
+static inline bool property_enabled(struct rockchip_usb2phy *rphy,
+				    const struct usb2phy_reg *reg)
+{
+	int ret;
+	unsigned int tmp, orig;
+	unsigned int mask = GENMASK(reg->bitend, reg->bitstart);
+
+	ret = regmap_read(rphy->grf, reg->offset, &orig);
+	if (ret)
+		return false;
+
+	tmp = (orig & mask) >> reg->bitstart;
+	return tmp == reg->enable;
+}
+
+static int rockchip_usb2phy_clk480m_enable(struct clk_hw *hw)
+{
+	struct rockchip_usb2phy *rphy =
+		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+	int ret;
+
+	/* turn on 480m clk output if it is off */
+	if (!property_enabled(rphy, &rphy->phy_cfg->clkout_ctl)) {
+		ret = property_enable(rphy, &rphy->phy_cfg->clkout_ctl, true);
+		if (ret)
+			return ret;
+
+		/* waitting for the clk become stable */
+		mdelay(1);
+	}
+
+	return 0;
+}
+
+static void rockchip_usb2phy_clk480m_disable(struct clk_hw *hw)
+{
+	struct rockchip_usb2phy *rphy =
+		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+
+	/* turn off 480m clk output */
+	property_enable(rphy, &rphy->phy_cfg->clkout_ctl, false);
+}
+
+static int rockchip_usb2phy_clk480m_enabled(struct clk_hw *hw)
+{
+	struct rockchip_usb2phy *rphy =
+		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+
+	return property_enabled(rphy, &rphy->phy_cfg->clkout_ctl);
+}
+
+static unsigned long
+rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw,
+				     unsigned long parent_rate)
+{
+	return 480000000;
+}
+
+static const struct clk_ops rockchip_usb2phy_clkout_ops = {
+	.enable = rockchip_usb2phy_clk480m_enable,
+	.disable = rockchip_usb2phy_clk480m_disable,
+	.is_enabled = rockchip_usb2phy_clk480m_enabled,
+	.recalc_rate = rockchip_usb2phy_clk480m_recalc_rate,
+};
+
+static void rockchip_usb2phy_clk480m_unregister(void *data)
+{
+	struct rockchip_usb2phy *rphy = data;
+
+	of_clk_del_provider(rphy->dev->of_node);
+	clk_unregister(rphy->clk480m);
+
+	if (rphy->clk)
+		clk_put(rphy->clk);
+}
+
+static int
+rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
+{
+	struct device_node *node = rphy->dev->of_node;
+	struct clk_init_data init;
+	const char *clk_name;
+	int ret;
+
+	init.flags = 0;
+	init.name = "clk_usbphy_480m";
+	init.ops = &rockchip_usb2phy_clkout_ops;
+
+	/* optional override of the clockname */
+	of_property_read_string(node, "clock-output-names", &init.name);
+
+	rphy->clk = of_clk_get_by_name(node, "phyclk");
+	if (IS_ERR(rphy->clk)) {
+		rphy->clk = NULL;
+		init.parent_names = NULL;
+		init.num_parents = 0;
+	} else {
+		clk_name = __clk_get_name(rphy->clk);
+		init.parent_names = &clk_name;
+		init.num_parents = 1;
+	}
+
+	rphy->clk480m_hw.init = &init;
+
+	/* register the clock */
+	rphy->clk480m = clk_register(rphy->dev, &rphy->clk480m_hw);
+	if (IS_ERR(rphy->clk480m)) {
+		ret = PTR_ERR(rphy->clk480m);
+		goto err_register;
+	}
+
+	ret = of_clk_add_provider(node, of_clk_src_simple_get, rphy->clk480m);
+	if (ret < 0)
+		goto err_clk_provider;
+
+	ret = devm_add_action(rphy->dev, rockchip_usb2phy_clk480m_unregister,
+			      rphy);
+	if (ret < 0)
+		goto err_unreg_action;
+
+	return 0;
+
+err_unreg_action:
+	of_clk_del_provider(node);
+err_clk_provider:
+	clk_unregister(rphy->clk480m);
+err_register:
+	if (rphy->clk)
+		clk_put(rphy->clk);
+	return ret;
+}
+
+static int rockchip_usb2phy_init(struct phy *phy)
+{
+	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+	int ret;
+
+	if (rport->port_id == USB2PHY_PORT_HOST) {
+		/* clear linestate and enable linestate detect irq */
+		mutex_lock(&rport->mutex);
+
+		ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+		if (ret) {
+			mutex_unlock(&rport->mutex);
+			return ret;
+		}
+
+		ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true);
+		if (ret) {
+			mutex_unlock(&rport->mutex);
+			return ret;
+		}
+
+		mutex_unlock(&rport->mutex);
+		schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
+	}
+
+	return 0;
+}
+
+static int rockchip_usb2phy_resume(struct phy *phy)
+{
+	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+	int ret;
+
+	dev_dbg(&rport->phy->dev, "port resume\n");
+
+	ret = clk_prepare_enable(rphy->clk480m);
+	if (ret)
+		return ret;
+
+	ret = property_enable(rphy, &rport->port_cfg->phy_sus, false);
+	if (ret)
+		return ret;
+
+	rport->suspended = false;
+	return 0;
+}
+
+static int rockchip_usb2phy_suspend(struct phy *phy)
+{
+	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+	int ret;
+
+	dev_dbg(&rport->phy->dev, "port suspend\n");
+
+	ret = property_enable(rphy, &rport->port_cfg->phy_sus, true);
+	if (ret)
+		return ret;
+
+	rport->suspended = true;
+	clk_disable_unprepare(rphy->clk480m);
+	return 0;
+}
+
+static int rockchip_usb2phy_exit(struct phy *phy)
+{
+	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+
+	if (rport->port_id == USB2PHY_PORT_HOST)
+		cancel_delayed_work_sync(&rport->sm_work);
+
+	return 0;
+}
+
+static const struct phy_ops rockchip_usb2phy_ops = {
+	.init		= rockchip_usb2phy_init,
+	.exit		= rockchip_usb2phy_exit,
+	.power_on	= rockchip_usb2phy_resume,
+	.power_off	= rockchip_usb2phy_suspend,
+	.owner		= THIS_MODULE,
+};
+
+/*
+ * The function manage host-phy port state and suspend/resume phy port
+ * to save power.
+ *
+ * we rely on utmi_linestate and utmi_hostdisconnect to identify whether
+ * FS/HS is disconnect or not. Besides, we do not need care it is FS
+ * disconnected or HS disconnected, actually, we just only need get the
+ * device is disconnected at last through rearm the delayed work,
+ * to suspend the phy port in _PHY_STATE_DISCONNECT_ case.
+ *
+ * NOTE: It may invoke *phy_suspend or *phy_resume which will invoke some
+ * clk related APIs, so do not invoke it from interrupt context directly.
+ */
+static void rockchip_usb2phy_sm_work(struct work_struct *work)
+{
+	struct rockchip_usb2phy_port *rport =
+		container_of(work, struct rockchip_usb2phy_port, sm_work.work);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+	unsigned int sh = rport->port_cfg->utmi_hstdet.bitend -
+			  rport->port_cfg->utmi_hstdet.bitstart + 1;
+	unsigned int ul, uhd, state;
+	unsigned int ul_mask, uhd_mask;
+	int ret;
+
+	mutex_lock(&rport->mutex);
+
+	ret = regmap_read(rphy->grf, rport->port_cfg->utmi_ls.offset, &ul);
+	if (ret < 0)
+		goto next_schedule;
+
+	ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset,
+			  &uhd);
+	if (ret < 0)
+		goto next_schedule;
+
+	uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend,
+			   rport->port_cfg->utmi_hstdet.bitstart);
+	ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend,
+			  rport->port_cfg->utmi_ls.bitstart);
+
+	/* stitch on utmi_ls and utmi_hstdet as phy state */
+	state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) |
+		(((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh);
+
+	switch (state) {
+	case PHY_STATE_HS_ONLINE:
+		dev_dbg(&rport->phy->dev, "HS online\n");
+		break;
+	case PHY_STATE_FS_CONNECT:
+		/*
+		 * For FS device, the online state share with connect state
+		 * from utmi_ls and utmi_hstdet register, so we distinguish
+		 * them via suspended flag.
+		 */
+		if (!rport->suspended) {
+			dev_dbg(&rport->phy->dev, "FS online\n");
+			break;
+		}
+		/* fall through */
+	case PHY_STATE_HS_CONNECT:
+		if (rport->suspended) {
+			dev_dbg(&rport->phy->dev, "HS/FS connected\n");
+			rockchip_usb2phy_resume(rport->phy);
+			rport->suspended = false;
+		}
+		break;
+	case PHY_STATE_DISCONNECT:
+		if (!rport->suspended) {
+			dev_dbg(&rport->phy->dev, "HS/FS disconnected\n");
+			rockchip_usb2phy_suspend(rport->phy);
+			rport->suspended = true;
+		}
+
+		/*
+		 * activate the linestate detection to get the next device
+		 * plug-in irq.
+		 */
+		property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+		property_enable(rphy, &rport->port_cfg->ls_det_en, true);
+
+		/*
+		 * we don't need to rearm the delayed work when the phy port
+		 * is suspended.
+		 */
+		mutex_unlock(&rport->mutex);
+		return;
+	default:
+		dev_dbg(&rport->phy->dev, "unknown phy state\n");
+		break;
+	}
+
+next_schedule:
+	mutex_unlock(&rport->mutex);
+	schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
+}
+
+static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data)
+{
+	struct rockchip_usb2phy_port *rport = data;
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+	if (!property_enabled(rphy, &rport->port_cfg->ls_det_st))
+		return IRQ_NONE;
+
+	mutex_lock(&rport->mutex);
+
+	/* disable linestate detect irq and clear its status */
+	property_enable(rphy, &rport->port_cfg->ls_det_en, false);
+	property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+
+	mutex_unlock(&rport->mutex);
+
+	/*
+	 * In this case for host phy port, a new device is plugged in,
+	 * meanwhile, if the phy port is suspended, we need rearm the work to
+	 * resume it and mange its states; otherwise, we do nothing about that.
+	 */
+	if (rport->suspended && rport->port_id == USB2PHY_PORT_HOST)
+		rockchip_usb2phy_sm_work(&rport->sm_work.work);
+
+	return IRQ_HANDLED;
+}
+
+static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
+					   struct rockchip_usb2phy_port *rport,
+					   struct device_node *child_np)
+{
+	int ret;
+
+	rport->port_id = USB2PHY_PORT_HOST;
+	rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_HOST];
+
+	mutex_init(&rport->mutex);
+	INIT_DELAYED_WORK(&rport->sm_work, rockchip_usb2phy_sm_work);
+
+	rport->ls_irq = of_irq_get_byname(child_np, "linestate");
+	if (rport->ls_irq < 0) {
+		dev_err(rphy->dev, "no linestate irq provided\n");
+		return rport->ls_irq;
+	}
+
+	ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL,
+					rockchip_usb2phy_linestate_irq,
+					IRQF_ONESHOT,
+					"rockchip_usb2phy", rport);
+	if (ret) {
+		dev_err(rphy->dev, "failed to request irq handle\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rockchip_usb2phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *child_np;
+	struct phy_provider *provider;
+	struct rockchip_usb2phy *rphy;
+	const struct rockchip_usb2phy_cfg *phy_cfgs;
+	const struct of_device_id *match;
+	unsigned int reg;
+	int index, ret;
+
+	rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL);
+	if (!rphy)
+		return -ENOMEM;
+
+	match = of_match_device(dev->driver->of_match_table, dev);
+	if (!match || !match->data) {
+		dev_err(dev, "phy configs are not assigned!\n");
+		return -EINVAL;
+	}
+
+	if (!dev->parent || !dev->parent->of_node)
+		return -EINVAL;
+
+	rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
+	if (IS_ERR(rphy->grf))
+		return PTR_ERR(rphy->grf);
+
+	if (of_property_read_u32(np, "reg", &reg)) {
+		dev_err(dev, "the reg property is not assigned in %s node\n",
+			np->name);
+		return -EINVAL;
+	}
+
+	rphy->dev = dev;
+	phy_cfgs = match->data;
+	platform_set_drvdata(pdev, rphy);
+
+	/* find out a proper config which can be matched with dt. */
+	index = 0;
+	while (phy_cfgs[index].reg) {
+		if (phy_cfgs[index].reg == reg) {
+			rphy->phy_cfg = &phy_cfgs[index];
+			break;
+		}
+
+		++index;
+	}
+
+	if (!rphy->phy_cfg) {
+		dev_err(dev, "no phy-config can be matched with %s node\n",
+			np->name);
+		return -EINVAL;
+	}
+
+	ret = rockchip_usb2phy_clk480m_register(rphy);
+	if (ret) {
+		dev_err(dev, "failed to register 480m output clock\n");
+		return ret;
+	}
+
+	index = 0;
+	for_each_available_child_of_node(np, child_np) {
+		struct rockchip_usb2phy_port *rport = &rphy->ports[index];
+		struct phy *phy;
+
+		phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
+		if (IS_ERR(phy)) {
+			dev_err(dev, "failed to create phy\n");
+			ret = PTR_ERR(phy);
+			goto put_child;
+		}
+
+		rport->phy = phy;
+
+		/* initialize otg/host port separately */
+		if (!of_node_cmp(child_np->name, "host-port")) {
+			ret = rockchip_usb2phy_host_port_init(rphy, rport,
+							      child_np);
+			if (ret)
+				goto put_child;
+		}
+
+		phy_set_drvdata(rport->phy, rport);
+
+		/* to prevent out of boundary */
+		if (++index >= rphy->phy_cfg->num_ports)
+			break;
+	}
+
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(provider);
+
+put_child:
+	of_node_put(child_np);
+	return ret;
+}
+
+static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = {
+	{
+		.reg = 0x700,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0724, 15, 15, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0728, 15, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x0680, 4, 4, 0, 1 },
+				.ls_det_st	= { 0x0690, 4, 4, 0, 1 },
+				.ls_det_clr	= { 0x06a0, 4, 4, 0, 1 },
+				.utmi_ls	= { 0x049c, 14, 13, 0, 1 },
+				.utmi_hstdet	= { 0x049c, 12, 12, 0, 1 }
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
+static const struct of_device_id rockchip_usb2phy_dt_match[] = {
+	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rockchip_usb2phy_dt_match);
+
+static struct platform_driver rockchip_usb2phy_driver = {
+	.probe		= rockchip_usb2phy_probe,
+	.driver		= {
+		.name	= "rockchip-usb2phy",
+		.of_match_table = rockchip_usb2phy_dt_match,
+	},
+};
+module_platform_driver(rockchip_usb2phy_driver);
+
+MODULE_AUTHOR("Frank Wang <frank.wang at rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB2.0 PHY driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5





More information about the Linux-rockchip mailing list