[PATCH v4 0/2] Add a new Rockchip usb2 phy driver

[Frank Wang]

Hi Heiko,

On 2016/6/8 22:33, Heiko Stübner wrote:
> Hi Frank,
>
> Am Dienstag, 7. Juni 2016, 17:15:52 schrieb Frank Wang:
>> The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy
>> IP block than rk3288 and before, and most of phy-related registers are
>> also different from the past, so a new phy driver is required necessarily.
>>
>> These series patches add phy-rockchip-inno-usb2.c and the corresponding
>> documentation.
> please see the replies on the v3 thread (regarding handling of multiple phy
> blocks) .
>

OK, I just got back from Dragon Boat Festival (one of the great 
traditions of my nation's festival), I will correct it and send out 
later today.


BR.
Frank

>> Changes in v4:
>>   - Used 'phy-supply' instead of 'vbus_*-supply'.
>>
>> Changes in v3:
>>   - Supplemented some hardware-description into the devicetree bindings.
>>   - Resolved the mapping defect between fixed value in driver and the
>> property in devicetree.
>>   - Code cleanup.
>>
>> Changes in v2:
>>   - Specified more hardware-description into the devicetree bindings.
>>   - Optimized some process of driver.
>>
>> Frank Wang (2):
>>    Documentation: bindings: add DT documentation for Rockchip USB2PHY
>>    phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy
>>
>>   .../bindings/phy/phy-rockchip-inno-usb2.txt        |   62 ++
>>   drivers/phy/Kconfig                                |    7 +
>>   drivers/phy/Makefile                               |    1 +
>>   drivers/phy/phy-rockchip-inno-usb2.c               |  614
>> ++++++++++++++++++++ 4 files changed, 684 insertions(+)
>>   create mode 100644
>> Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt create
>> mode 100644 drivers/phy/phy-rockchip-inno-usb2.c
>
>
>