[PATCH v3 1/2] Documentation: bindings: add DT documentation for Rockchip USB2PHY

[Kishon Vijay Abraham I]

Hi,

On Tuesday 07 June 2016 09:01 AM, Frank Wang wrote:
> Hi Heiko,
> 
> On 2016/6/7 10:59, Frank Wang wrote:
>> Hi Heiko & Mark,
>>
>> On 2016/6/6 20:33, Heiko Stübner wrote:
>>> Am Montag, 6. Juni 2016, 12:27:54 schrieb Mark Rutland:
>>>> On Mon, Jun 06, 2016 at 05:20:03PM +0800, Frank Wang wrote:
>>>>> Signed-off-by: Frank Wang <frank.wang at rock-chips.com>
>>>>> ---
>>>>>
>>>>> Changes in v3:
>>>>>   - Added 'clocks' and 'clock-names' optional properties.
>>>>>   - Specified 'otg-port' and 'host-port' as the sub-node name.
>>>>>
>>>>> Changes in v2:
>>>>>   - Changed vbus_host optional property from gpio to regulator.
>>>>>   - Specified vbus_otg-supply optional property.
>>>>>   - Specified otg_id and otg_bvalid property.
>>>>>     .../bindings/phy/phy-rockchip-inno-usb2.txt        | 60
>>>>>   ++++++++++++++++++++ 1 file changed, 60 insertions(+)
>>>>>   create mode 100644
>>>>> Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt>
>>>>> diff --git
>>>>> a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
>>>>> b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt new
>>>>> file mode 100644
>>>>> index 0000000..0b4bbbb
>>>>> --- /dev/null
>>>>> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
>>>>> @@ -0,0 +1,60 @@
>>>>> +ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
>>>>> +
>>>>> +Required properties (phy (parent) node):
>>>>> + - compatible : should be one of the listed compatibles:
>>>>> +    * "rockchip,rk3366-usb2phy"
>>>>> +    * "rockchip,rk3399-usb2phy"
>>>>> + - #clock-cells : should be 0.
>>>>> + - clock-output-names : specify the 480m output clock name.
>>>>> +
>>>>> +Optional properties:
>>>>> + - clocks : phandle + phy specifier pair, for the input clock of phy.
>>>>> + - clock-names : input clock name of phy, must be "phyclk".
>>>>> + - vbus_host-supply : phandle to a regulator that supplies host vbus.
>>>>> + - vbus_otg-supply : phandle to a regulator that supplies otg vbus.
>>>> Nit: s/_/-/ here.
>>> Something I only stumbled over yesterday for the first time on my rk3288-
>>> popmetal: The phy subnodes seem to be able to use a generic phy-supply
>>> property from inside the phy-core itself, see:
>>>
>>> https://github.com/mmind/linux-rockchip/commit/93739f521fc65f44524b00c9aaf6db46bca94e02#diff-ddf3e45ebb753d6debf57022003a1a57R597
>>>
>>>
>>> for my WIP code for that other board.
>>>
>>
>> Ah, good comments! I will try later, if it is practicable, I shall correct it
>> into the next patches (patch v4).
>>
> 
> I am sorry to tell you that seems unworkable, because we have two sub-nodes
> (phy-ports) in one parent-node (phy),
> what is more, the 'phy-supply' property can only put into parent-node, I
> believe it can not be differentiated types of ports.

'phy-supply' is a property of the phy node and not the 'phy-provider' node. So
IMO this should work. What problem do you see?

Thanks
Kishon