[v2, 2/2] phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy
Guenter Roeck
linux at roeck-us.net
Fri Jun 3 12:57:47 PDT 2016
On Thu, Jun 02, 2016 at 02:48:10PM +0800, Frank Wang wrote:
> The newer SoCs (rk3366, rk3399) take a different usb-phy IP block
> than rk3288 and before, and most of phy-related registers are also
> different from the past, so a new phy driver is required necessarily.
>
> Signed-off-by: Frank Wang <frank.wang at rock-chips.com>
> ---
>
> Changes in v2:
> - Changed vbus_host operation from gpio to regulator in *_probe.
> - Improved the fault treatment relate to 480m clock register.
> - Cleaned up some meaningless codes in *_clk480m_disable.
> - made more clear the comment of *_sm_work.
>
> drivers/phy/Kconfig | 7 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-rockchip-inno-usb2.c | 604 ++++++++++++++++++++++++++++++++++
> 3 files changed, 612 insertions(+)
> create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index b869b98..29ef15c 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -347,6 +347,13 @@ config PHY_ROCKCHIP_USB
> help
> Enable this to support the Rockchip USB 2.0 PHY.
>
> +config PHY_ROCKCHIP_INNO_USB2
> + tristate "Rockchip INNO USB2PHY Driver"
> + depends on ARCH_ROCKCHIP && OF
> + select GENERIC_PHY
> + help
> + Support for Rockchip USB2.0 PHY with Innosilicon IP block.
> +
> config PHY_ROCKCHIP_EMMC
> tristate "Rockchip EMMC PHY Driver"
> depends on ARCH_ROCKCHIP && OF
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 9c3e73c..4963fbc 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -38,6 +38,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
> obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
> obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
> obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
> +obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
> obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
> obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
> obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
> diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c
> new file mode 100644
> index 0000000..eca46ff
> --- /dev/null
> +++ b/drivers/phy/phy-rockchip-inno-usb2.c
> @@ -0,0 +1,604 @@
> +/*
> + * Rockchip USB2.0 PHY with Innosilicon IP block driver
> + *
> + * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/jiffies.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
> +
> +#define BIT_WRITEABLE_SHIFT 16
> +#define SCHEDULE_DELAY (60 * HZ)
> +
> +enum rockchip_usb2phy_port_id {
> + USB2PHY_PORT_OTG,
> + USB2PHY_PORT_HOST,
> + USB2PHY_NUM_PORTS,
> +};
> +
> +enum rockchip_usb2phy_host_state {
> + PHY_STATE_HS_ONLINE = 0,
> + PHY_STATE_DISCONNECT = 1,
> + PHY_STATE_HS_CONNECT = 2,
> + PHY_STATE_FS_CONNECT = 4,
> +};
> +
> +struct usb2phy_reg {
> + unsigned int offset;
> + unsigned int bitend;
> + unsigned int bitstart;
> + unsigned int disable;
> + unsigned int enable;
> +};
> +
> +/**
> + * struct rockchip_usb2phy_port_cfg: usb-phy port configuration.
> + * @phy_sus: phy suspend register.
> + * @ls_det_en: linestate detection enable register.
> + * @ls_det_st: linestate detection state register.
> + * @ls_det_clr: linestate detection clear register.
> + * @utmi_ls: utmi linestate state register.
> + * @utmi_hstdet: utmi host disconnect register.
> + */
> +struct rockchip_usb2phy_port_cfg {
> + struct usb2phy_reg phy_sus;
> + struct usb2phy_reg ls_det_en;
> + struct usb2phy_reg ls_det_st;
> + struct usb2phy_reg ls_det_clr;
> + struct usb2phy_reg utmi_ls;
> + struct usb2phy_reg utmi_hstdet;
> +};
> +
> +/**
> + * struct rockchip_usb2phy_cfg: usb-phy configuration.
> + * @num_ports: specify how many ports that the phy has.
> + * @clkout_ctl: keep on/turn off output clk of phy.
> + */
> +struct rockchip_usb2phy_cfg {
> + unsigned int num_ports;
> + struct usb2phy_reg clkout_ctl;
> + const struct rockchip_usb2phy_port_cfg *port_cfgs;
> +};
> +
> +/**
> + * struct rockchip_usb2phy_port: usb-phy port data.
> + * @port_id: flag for otg port or host port.
> + * @suspended: phy suspended flag.
> + * @ls_irq: IRQ number assigned for linestate detection.
> + * @mutex: for register updating in sm_work.
> + * @sm_work: OTG state machine work.
> + * @phy_cfg: port register configuration, assigned by driver data.
> + */
> +struct rockchip_usb2phy_port {
> + struct phy *phy;
> + unsigned int port_id;
> + bool suspended;
> + int ls_irq;
> + struct mutex mutex;
> + struct delayed_work sm_work;
> + const struct rockchip_usb2phy_port_cfg *port_cfg;
> +};
> +
> +/**
> + * struct rockchip_usb2phy: usb2.0 phy driver data.
> + * @grf: General Register Files regmap.
> + * @clk480m: clock struct of phy output clk.
> + * @clk_hw: clock struct of phy output clk management.
> + * @vbus_host: the regulator for vbus_host supply.
> + * @phy_cfg: phy register configuration, assigned by driver data.
> + * @ports: phy port instance.
> + */
> +struct rockchip_usb2phy {
> + struct device *dev;
> + struct regmap *grf;
> + struct clk *clk480m;
> + struct clk_hw clk480m_hw;
> + struct regulator *vbus_host;
> + const struct rockchip_usb2phy_cfg *phy_cfg;
> + struct rockchip_usb2phy_port ports[USB2PHY_NUM_PORTS];
> +};
> +
> +static inline int property_enable(struct rockchip_usb2phy *rphy,
> + const struct usb2phy_reg *reg, bool en)
> +{
> + unsigned int val, mask, tmp;
> +
> + tmp = en ? reg->enable : reg->disable;
> + mask = GENMASK(reg->bitend, reg->bitstart);
> + val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
> +
> + return regmap_write(rphy->grf, reg->offset, val);
> +}
> +
> +static inline bool property_enabled(struct rockchip_usb2phy *rphy,
> + const struct usb2phy_reg *reg)
> +{
> + int ret;
> + unsigned int tmp, orig;
> + unsigned int mask = GENMASK(reg->bitend, reg->bitstart);
> +
> + ret = regmap_read(rphy->grf, reg->offset, &orig);
> + if (ret)
> + return false;
> +
> + tmp = (orig & mask) >> reg->bitstart;
> + return tmp == reg->enable;
> +}
> +
> +static int rockchip_usb2phy_clk480m_enable(struct clk_hw *hw)
> +{
> + struct rockchip_usb2phy *rphy =
> + container_of(hw, struct rockchip_usb2phy, clk480m_hw);
> + int ret = 0;
> +
> + /* turn on 480m clk output if it is off */
> + if (!property_enabled(rphy, &rphy->phy_cfg->clkout_ctl)) {
> + ret = property_enable(rphy, &rphy->phy_cfg->clkout_ctl, true);
> + if (ret)
> + return ret;
> +
> + /* waitting for the clk become stable */
> + mdelay(1);
> + }
> +
> + return ret;
> +}
> +
> +static void rockchip_usb2phy_clk480m_disable(struct clk_hw *hw)
> +{
> + struct rockchip_usb2phy *rphy =
> + container_of(hw, struct rockchip_usb2phy, clk480m_hw);
> +
> + /* turn off 480m clk output */
> + property_enable(rphy, &rphy->phy_cfg->clkout_ctl, false);
> +}
> +
> +static int rockchip_usb2phy_clk480m_enabled(struct clk_hw *hw)
> +{
> + struct rockchip_usb2phy *rphy =
> + container_of(hw, struct rockchip_usb2phy, clk480m_hw);
> +
> + return property_enabled(rphy, &rphy->phy_cfg->clkout_ctl);
> +}
> +
> +static unsigned long
> +rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + return 480000000;
> +}
> +
> +static const struct clk_ops rockchip_usb2phy_clkout_ops = {
> + .enable = rockchip_usb2phy_clk480m_enable,
> + .disable = rockchip_usb2phy_clk480m_disable,
> + .is_enabled = rockchip_usb2phy_clk480m_enabled,
> + .recalc_rate = rockchip_usb2phy_clk480m_recalc_rate,
> +};
> +
> +static void rockchip_usb2phy_clk480m_unregister(void *data)
> +{
> + struct rockchip_usb2phy *rphy = data;
> +
> + of_clk_del_provider(rphy->dev->of_node);
> + clk_unregister(rphy->clk480m);
> +}
> +
> +static struct clk *
> +rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
> +{
> + struct device_node *node = rphy->dev->of_node;
> + struct clk *clk;
> + struct clk_init_data init;
> + int ret;
> +
> + init.name = "clk_usbphy_480m";
> + init.ops = &rockchip_usb2phy_clkout_ops;
> + init.flags = CLK_IS_ROOT;
> + init.parent_names = NULL;
> + init.num_parents = 0;
> + rphy->clk480m_hw.init = &init;
> +
> + /* optional override of the clockname */
> + of_property_read_string(node, "clock-output-names", &init.name);
> +
> + /* register the clock */
> + clk = clk_register(rphy->dev, &rphy->clk480m_hw);
> + if (IS_ERR(clk))
> + return clk;
> +
> + ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
> + if (ret < 0)
> + goto err_clk_provider;
> +
> + ret = devm_add_action(rphy->dev, rockchip_usb2phy_clk480m_unregister,
> + rphy);
> + if (ret < 0)
> + goto err_unreg_action;
> +
> + return clk;
> +
> +err_unreg_action:
> + of_clk_del_provider(node);
> +err_clk_provider:
> + clk_unregister(clk);
> + return ERR_PTR(ret);
> +}
> +
> +static int rockchip_usb2phy_init(struct phy *phy)
> +{
> + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
> + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
> + int ret = 0;
> +
> + if (rport->port_id == USB2PHY_PORT_HOST) {
> + /* clear linestate and enable linestate detect irq */
> + mutex_lock(&rport->mutex);
> +
> + ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
> + if (ret) {
> + mutex_unlock(&rport->mutex);
> + return ret;
> + }
> +
> + ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true);
> + if (ret) {
> + mutex_unlock(&rport->mutex);
> + return ret;
> + }
> +
> + mutex_unlock(&rport->mutex);
> + schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
> + }
> +
> + return ret;
> +}
> +
> +static int rockchip_usb2phy_resume(struct phy *phy)
> +{
> + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
> + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
> + int ret;
> +
> + dev_dbg(&rport->phy->dev, "port resume\n");
> +
> + ret = clk_prepare_enable(rphy->clk480m);
> + if (ret)
> + return ret;
> +
> + ret = property_enable(rphy, &rport->port_cfg->phy_sus, false);
> + if (ret)
> + return ret;
> +
> + rport->suspended = false;
> + return 0;
> +}
> +
> +static int rockchip_usb2phy_suspend(struct phy *phy)
> +{
> + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
> + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
> + int ret;
> +
> + dev_dbg(&rport->phy->dev, "port suspend\n");
> +
> + ret = property_enable(rphy, &rport->port_cfg->phy_sus, true);
> + if (ret)
> + return ret;
> +
> + rport->suspended = true;
> + clk_disable_unprepare(rphy->clk480m);
> + return 0;
> +}
> +
> +static int rockchip_usb2phy_exit(struct phy *phy)
> +{
> + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
> +
> + if (rport->port_id == USB2PHY_PORT_HOST)
> + cancel_delayed_work_sync(&rport->sm_work);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops rockchip_usb2phy_ops = {
> + .init = rockchip_usb2phy_init,
> + .exit = rockchip_usb2phy_exit,
> + .power_on = rockchip_usb2phy_resume,
> + .power_off = rockchip_usb2phy_suspend,
> + .owner = THIS_MODULE,
> +};
> +
> +/*
> + * The function manage host-phy port state and suspend/resume phy port
> + * to save power.
> + *
> + * we rely on utmi_linestate and utmi_hostdisconnect to identify whether
> + * FS/HS is disconnect or not. Besides, we do not need care it is FS
> + * disconnected or HS disconnected, actually, we just only need get the
> + * device is disconnected at last through rearm the delayed work,
> + * to suspend the phy port in _PHY_STATE_DISCONNECT_ case.
> + *
> + * NOTE: It may invoke *phy_suspend or *phy_resume which will invoke some
> + * clk related APIs, so do not invoke it from interrupt context directly.
> + */
> +static void rockchip_usb2phy_sm_work(struct work_struct *work)
> +{
> + struct rockchip_usb2phy_port *rport =
> + container_of(work, struct rockchip_usb2phy_port, sm_work.work);
> + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
> + unsigned int sh = rport->port_cfg->utmi_hstdet.bitend -
> + rport->port_cfg->utmi_hstdet.bitstart + 1;
> + unsigned int ul, uhd, state;
> + unsigned int ul_mask, uhd_mask;
> + int ret;
> +
> + mutex_lock(&rport->mutex);
> +
> + ret = regmap_read(rphy->grf, rport->port_cfg->utmi_ls.offset, &ul);
> + if (ret < 0)
> + goto next_schedule;
> +
> + ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset,
> + &uhd);
> + if (ret < 0)
> + goto next_schedule;
> +
> + uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend,
> + rport->port_cfg->utmi_hstdet.bitstart);
> + ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend,
> + rport->port_cfg->utmi_ls.bitstart);
> +
> + /* stitch on utmi_ls and utmi_hstdet as phy state */
> + state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) |
> + (((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh);
> +
> + switch (state) {
> + case PHY_STATE_HS_ONLINE:
> + dev_dbg(&rport->phy->dev, "HS online\n");
> + break;
> + case PHY_STATE_FS_CONNECT:
> + /*
> + * For FS device, the online state share with connect state
> + * from utmi_ls and utmi_hstdet register, so we distinguish
> + * them via suspended flag.
> + */
> + if (!rport->suspended) {
> + dev_dbg(&rport->phy->dev, "FS online\n");
> + break;
> + }
> + /* fall through */
> + case PHY_STATE_HS_CONNECT:
> + if (rport->suspended) {
> + dev_dbg(&rport->phy->dev, "HS/FS connected\n");
> + rockchip_usb2phy_resume(rport->phy);
> + rport->suspended = false;
> + }
> + break;
> + case PHY_STATE_DISCONNECT:
> + if (!rport->suspended) {
> + dev_dbg(&rport->phy->dev, "HS/FS disconnected\n");
> + rockchip_usb2phy_suspend(rport->phy);
> + rport->suspended = true;
> + }
> +
> + /*
> + * activate the linestate detection to get the next device
> + * plug-in irq.
> + */
> + property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
> + property_enable(rphy, &rport->port_cfg->ls_det_en, true);
> +
> + /*
> + * we don't need to rearm the delayed work when the phy port
> + * is suspended.
> + */
> + mutex_unlock(&rport->mutex);
> + return;
> + default:
> + dev_dbg(&rport->phy->dev, "unknown phy state\n");
> + break;
> + }
> +
> +next_schedule:
> + mutex_unlock(&rport->mutex);
> + schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
> +}
> +
> +static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data)
> +{
> + struct rockchip_usb2phy_port *rport = data;
> + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
> +
> + if (!property_enabled(rphy, &rport->port_cfg->ls_det_st))
> + return IRQ_NONE;
> +
> + mutex_lock(&rport->mutex);
> +
> + /* disable linestate detect irq and clear its status */
> + property_enable(rphy, &rport->port_cfg->ls_det_en, false);
> + property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
> +
> + mutex_unlock(&rport->mutex);
> +
> + /*
> + * In this case for host phy port, a new device is plugged in,
> + * meanwhile, if the phy port is suspended, we need rearm the work to
> + * resume it and mange its states; otherwise, we do nothing about that.
> + */
> + if (rport->suspended && rport->port_id == USB2PHY_PORT_HOST)
> + rockchip_usb2phy_sm_work(&rport->sm_work.work);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
> + struct rockchip_usb2phy_port *rport,
> + struct device_node *child_np)
> +{
> + int ret = 0;
> +
> + rport->port_id = USB2PHY_PORT_HOST;
> + mutex_init(&rport->mutex);
> + INIT_DELAYED_WORK(&rport->sm_work, rockchip_usb2phy_sm_work);
> +
> + rport->ls_irq = of_irq_get_byname(child_np, "linestate");
> + if (rport->ls_irq < 0) {
> + dev_err(rphy->dev, "no linestate irq provided\n");
> + return rport->ls_irq;
> + }
> +
> + ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL,
> + rockchip_usb2phy_linestate_irq,
> + IRQF_ONESHOT,
> + "rockchip_usb2phy", rport);
> + if (ret) {
> + dev_err(rphy->dev, "failed to request irq handle\n");
> + return ret;
> + }
> +
> + return ret;
> +}
> +
> +static int rockchip_usb2phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> + struct device_node *child_np;
> + struct phy_provider *provider;
> + struct rockchip_usb2phy *rphy;
> + const struct of_device_id *match;
> + int index, ret;
> +
> + rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL);
> + if (!rphy)
> + return -ENOMEM;
> +
> + match = of_match_device(dev->driver->of_match_table, dev);
> + if (!match || !match->data) {
> + dev_err(dev, "phy configs are not assigned!\n");
> + return -EINVAL;
> + }
> +
> + if (!dev->parent || !dev->parent->of_node)
> + return -ENOMEM;
> +
> + rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
> + if (IS_ERR(rphy->grf))
> + return PTR_ERR(rphy->grf);
> +
> + rphy->dev = dev;
> + rphy->phy_cfg = match->data;
> + platform_set_drvdata(pdev, rphy);
> +
> + rphy->clk480m = rockchip_usb2phy_clk480m_register(rphy);
> + if (IS_ERR(rphy->clk480m))
> + return PTR_ERR(rphy->clk480m);
> +
> + rphy->vbus_host = devm_regulator_get_optional(dev, "vbus_host");
> + if (IS_ERR(rphy->vbus_host)) {
> + ret = PTR_ERR(rphy->vbus_host);
> + if (ret == -EPROBE_DEFER)
> + return ret;
> +
> + dev_info(dev, "vbus_host regulator is not assigned!\n");
> + rphy->vbus_host = NULL;
> + } else {
> + ret = regulator_enable(rphy->vbus_host);
> + if (ret)
> + return ret;
> + }
> +
> + index = 0;
> + for_each_child_of_node(np, child_np) {
> + struct rockchip_usb2phy_port *rport = &rphy->ports[index];
> + struct phy *phy;
> +
> + phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
> + if (IS_ERR(phy)) {
> + dev_err(dev, "failed to create phy\n");
> + ret = PTR_ERR(phy);
> + goto put_child;
> + }
> +
> + rport->phy = phy;
> + rport->port_cfg = &rphy->phy_cfg->port_cfgs[index];
> +
> + /* initialize otg/host port separately */
> + if (!of_node_cmp(child_np->name, "host-port")) {
> + ret = rockchip_usb2phy_host_port_init(rphy, rport,
> + child_np);
> + if (ret)
> + goto put_child;
> + }
> +
> + phy_set_drvdata(rport->phy, rport);
> + index++;
I am concerned about the use of 'index', and how it maps to port_cfgs[]
and ports[]. If I take the example from the devicetree documentations,
the host port would get index==1 amd map to rphy->phy_cfg->port_cfgs[1],
which is empty in rk3366_phy_cfgs. If someone specifies dummy devicetree
sub-nodes, it would be easy to create references to port_cfgs[2] as well
as ports[2] or even higher, and the results would be unpredictable.
How about something like the following ?
if !of_node_cmp(child_np->name, "host-port")) {
rport->port_cfg =
&rphy->phy_cfg->port_cfgs[USB2PHY_PORT_HOST];
ret = rockchip_usb2phy_host_port_init(...);
...
}
phy_set_drvdata(rport->phy, rport);
if (++index >= rphy->phy_cfg->num_ports)
break;
> + }
> +
> + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + return PTR_ERR_OR_ZERO(provider);
> +
> +put_child:
> + of_node_put(child_np);
> + return ret;
> +}
> +
> +static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs = {
> + .num_ports = 1,
> + .clkout_ctl = { 0x0724, 15, 15, 1, 0 },
> + .port_cfgs = (struct rockchip_usb2phy_port_cfg[]) {
> + {
> + .phy_sus = { 0x0728, 15, 0, 0, 0x1d1 },
> + .ls_det_en = { 0x0680, 4, 4, 0, 1 },
> + .ls_det_st = { 0x0690, 4, 4, 0, 1 },
> + .ls_det_clr = { 0x06a0, 4, 4, 0, 1 },
> + .utmi_ls = { 0x049c, 14, 13, 0, 1 },
> + .utmi_hstdet = { 0x049c, 12, 12, 0, 1 }
Assuming this is the host port entry, I am wondering if it would be better
to explicitly specify the index.
struct rockchip_usb2phy_cfg {
unsigned int num_ports;
struct usb2phy_reg clkout_ctl;
struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS];
};
...
static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs = {
.num_ports = 1,
.clkout_ctl = { 0x0724, 15, 15, 1, 0 },
.port_cfgs = {
[USB2PHY_PORT_HOST] = {
.phy_sus = { 0x0728, 15, 0, 0, 0x1d1 },
.ls_det_en = { 0x0680, 4, 4, 0, 1 },
.ls_det_st = { 0x0690, 4, 4, 0, 1 },
.ls_det_clr = { 0x06a0, 4, 4, 0, 1 },
.utmi_ls = { 0x049c, 14, 13, 0, 1 },
.utmi_hstdet = { 0x049c, 12, 12, 0, 1 }
}
> + },
> +};
> +
> +static const struct of_device_id rockchip_usb2phy_dt_match[] = {
> + { .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, rockchip_usb2phy_dt_match);
> +
> +static struct platform_driver rockchip_usb2phy_driver = {
> + .probe = rockchip_usb2phy_probe,
> + .driver = {
> + .name = "rockchip-usb2phy",
> + .of_match_table = rockchip_usb2phy_dt_match,
> + },
> +};
> +module_platform_driver(rockchip_usb2phy_driver);
> +
> +MODULE_AUTHOR("Frank Wang <frank.wang at rock-chips.com>");
> +MODULE_DESCRIPTION("Rockchip USB2.0 PHY driver");
> +MODULE_LICENSE("GPL v2");
More information about the Linux-rockchip
mailing list