[PATCH 14/14] regulator: pwm: Document pwm-dutycycle-unit and pwm-dutycycle-range

Boris Brezillon boris.brezillon at free-electrons.com
Fri Jun 3 01:23:12 PDT 2016

Document the pwm-dutycycle-unit and pwm-dutycycle-range properties.

Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
 .../devicetree/bindings/regulator/pwm-regulator.txt          | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
index ed936f0..5303235 100644
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
@@ -34,6 +34,18 @@ Only required for Voltage Table Mode:
 			    First cell is voltage in microvolts (uV)
 			    Second cell is duty-cycle in percent (%)
+Optional properties for Continuous mode:
+- pwm-dutycycle-unit:	Integer value encoding the dutycycle unit. If not
+			defined, <100> is assumed, meaning that
+			pwm-dutycycle-range contains values expressed in
+			percent.
+- pwm-dutycycle-range:	Should contain 2 entries. The first entry is encoding
+			the dutycycle for regulator-min-microvolt and the
+			second one the dutycycle for regulator-max-microvolt.
+			Dutycyle values are expressed in pwm-dutycycle-unit.
+			If not defined, <0 100> is assumed.
 NB: To be clear, if voltage-table is provided, then the device will be used
 in Voltage Table Mode.  If no voltage-table is provided, then the device will
 be used in Continuous Voltage Mode.

More information about the Linux-rockchip mailing list