[PATCH v6 3/5] usb: dwc3: add phyif_utmi_quirk

[Rob Herring]

On Thu, Jul 07, 2016 at 10:54:24AM +0800, William Wu wrote:
> Add a quirk to configure the core to support the
> UTMI+ PHY with an 8- or 16-bit interface. UTMI+ PHY
> interface is hardware property, and it's platform
> dependent. Normall, the PHYIf can be configured

s/Normall/Normally/
s/PHYIf/PHYIF/

> during coreconsultant. But for some specific usb

s/usb/USB/

> cores(e.g. rk3399 soc dwc3), the default PHYIf
> configuration value is fault, so we need to
> reconfigure it by software.
> 
> And refer to the dwc3 databook, the GUSB2PHYCFG.USBTRDTIM

s/dwc3/DWC3/

> must be set to the corresponding value according to
> the UTMI+ PHY interface.

And wrap your lines at 70-74 characters.

Rob