[PATCH 2/3] ARM: dts: move regulator settings from common to specifics

Heiko Stuebner heiko at sntech.de
Wed Jul 6 09:13:06 PDT 2016


Hi,

Am Mittwoch, 6. Juli 2016, 23:25:23 schrieb ayaka:
> The regulator settings are the same in the firefly beta and
> firefly. But the firefly reload is different. I remove
> the difference part from the common header dtsi, but remained those
> common one to keep references.
> 
> Signed-off-by: ayaka <ayaka at soulik.info>

applies to all 3 patches: we require real names both in the patch/mail from 
as well as the Signed-off-by line, see [0] at number 11. To my untrained eye 
the name given doesn't look like a real name, please correct me if I'm 
wrong.


[0] https://www.kernel.org/doc/Documentation/SubmittingPatches


> ---
>  arch/arm/boot/dts/rk3288-firefly-beta.dts | 30
> ++++++++++++++++++++++++++++++ arch/arm/boot/dts/rk3288-firefly.dts     
> | 30 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/rk3288-firefly.dtsi
>     | 14 +++++++-------
>  3 files changed, 67 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts
> b/arch/arm/boot/dts/rk3288-firefly-beta.dts index 75d77e3..6c08dae2
> 100644
> --- a/arch/arm/boot/dts/rk3288-firefly-beta.dts
> +++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts
> @@ -69,3 +69,33 @@
>  &pwm0 {
>  	status = "okay";
>  };
> +
> +&gmac {
> +	phy-supply = <&vcc_lan>;
> +};

Not 100% sure, but I guess this does not need to be duplicated.
The supply is named vcc_lan in all board revisions only the supplying 
regulator seems different, so it should be enough to point the vcc_lan 
phandle to the correct regulator in the relevant file, but the gmac 
assignment could stay in the main file?

> +
> +&io_domains {
> +		audio-supply = <&vcca_33>;
> +		flash1-supply = <&vcc_lan>;
> +};

same here

> +
> +&regulators {
> +	vcca_18: REG7  {
> +		regulator-name = "vcca_18";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +	};
> +
> +	vcca_33: REG8 {
> +		regulator-name = "vcca_33";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +	};
> +
> +	vcc_lan: REG9 {
> +		regulator-name = "vcc_lan";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +};
> diff --git a/arch/arm/boot/dts/rk3288-firefly.dts
> b/arch/arm/boot/dts/rk3288-firefly.dts index c07fe92..1964b6f 100644
> --- a/arch/arm/boot/dts/rk3288-firefly.dts
> +++ b/arch/arm/boot/dts/rk3288-firefly.dts
> @@ -69,3 +69,33 @@
>  &pwm1 {
>  	status = "okay";
>  };
> +
> +&gmac {
> +	phy-supply = <&vcc_lan>;
> +};
> +
> +&io_domains {
> +		audio-supply = <&vcca_33>;
> +		flash1-supply = <&vcc_lan>;
> +};
> +
> +&regulators {
> +	vcca_18: REG7  {
> +		regulator-name = "vcca_18";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +	};
> +
> +	vcca_33: REG8 {
> +		regulator-name = "vcca_33";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +	};
> +
> +	vcc_lan: REG9 {
> +		regulator-name = "vcc_lan";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +};
> diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi
> b/arch/arm/boot/dts/rk3288-firefly.dtsi index 1d7f03c..205348f 100644
> --- a/arch/arm/boot/dts/rk3288-firefly.dtsi
> +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
> @@ -68,11 +68,9 @@
>  		compatible = "rockchip,rk3288-io-voltage-domain";
>  		rockchip,grf = <&grf>;
> 
> -		audio-supply = <&vcca_33>;
>  		bb-supply = <&vcc_io>;
>  		dvp-supply = <&dovdd_1v8>;
>  		flash0-supply = <&vcc_flash>;
> -		flash1-supply = <&vcc_lan>;
>  		gpio30-supply = <&vcc_io>;
>  		gpio1830-supply = <&vcc_io>;
>  		lcdc-supply = <&vcc_io>;
> @@ -225,7 +223,6 @@
>  	clock_in_out = "input";
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
> -	phy-supply = <&vcc_lan>;
>  	phy-mode = "rgmii";
>  	snps,reset-active-low;
>  	snps,reset-delays-us = <0 10000 1000000>;
> @@ -296,7 +293,7 @@
>  		inl2-supply = <&vcc_sys>;
>  		inl3-supply = <&vcc_20>;
> 
> -		regulators {
> +		regulators: regulators {

the phandle name is to generic, as this is part of the act8846 and not 
something generic. So please name the phandle act8846_regulators / 
act8846_regs or so.

>  			vcc_ddr: REG1 {
>  				regulator-name = "vcc_ddr";
>  				regulator-min-microvolt = <1200000>;
> @@ -339,24 +336,27 @@
>  				regulator-always-on;
>  			};
> 
> -			vcca_18: REG7 {
> +			REG7  {
>  				regulator-name = "vcca_18";
>  				regulator-min-microvolt = <1800000>;
>  				regulator-max-microvolt = <1800000>;
>  			};
> 
> -			vcca_33: REG8 {
> +

unecessary new empty line

> +			REG8 {
>  				regulator-name = "vcca_33";
>  				regulator-min-microvolt = <3300000>;
>  				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
>  			};
> 
> -			vcc_lan: REG9 {
> +			REG9 {
>  				regulator-name = "vcc_lan";
>  				regulator-min-microvolt = <3300000>;
>  				regulator-max-microvolt = <3300000>;
>  			};
> 
> +

unecessary new empty line

>  			vdd_10: REG10 {
>  				regulator-name = "vdd_10";
>  				regulator-min-microvolt = <1000000>;
> --
> 2.7.4


Heiko



More information about the Linux-rockchip mailing list