[PATCH v4 14/21] usb: dwc2: host: Split code out to make dwc2_do_reserve()
Douglas Anderson
dianders at chromium.org
Wed Jan 20 21:04:25 PST 2016
This no-op change splits code out of dwc2_schedule_periodic() into a
dwc2_do_reserve() function. This makes it a little easier to follow the
logic.
Signed-off-by: Douglas Anderson <dianders at chromium.org>
---
Changes in v4:
- Split code out to make dwc2_do_reserve() new for v4.
Changes in v3: None
Changes in v2: None
drivers/usb/dwc2/hcd_queue.c | 112 ++++++++++++++++++++++++++-----------------
1 file changed, 67 insertions(+), 45 deletions(-)
diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
index 8a2067bc1e62..9ce407e5017d 100644
--- a/drivers/usb/dwc2/hcd_queue.c
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -245,6 +245,70 @@ static int dwc2_find_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
}
/**
+ * dwc2_do_reserve() - Make a periodic reservation
+ *
+ * Try to allocate space in the periodic schedule. Depending on parameters
+ * this might use the microframe scheduler or the dumb scheduler.
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh: QH for the periodic transfer.
+ *
+ * Returns: 0 upon success; error upon failure.
+ */
+static int dwc2_do_reserve(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ int status;
+
+ if (hsotg->core_params->uframe_sched > 0) {
+ int frame = -1;
+
+ status = dwc2_find_uframe(hsotg, qh);
+ if (status == 0)
+ frame = 7;
+ else if (status > 0)
+ frame = status - 1;
+
+ /* Set the new frame up */
+ if (frame >= 0) {
+ qh->next_active_frame &= ~0x7;
+ qh->next_active_frame |= (frame & 7);
+ dwc2_sch_dbg(hsotg,
+ "QH=%p sched_p nxt=%04x, uf=%d\n",
+ qh, qh->next_active_frame, frame);
+ }
+
+ if (status > 0)
+ status = 0;
+ } else {
+ status = dwc2_periodic_channel_available(hsotg);
+ if (status) {
+ dev_info(hsotg->dev,
+ "%s: No host channel available for periodic transfer\n",
+ __func__);
+ return status;
+ }
+
+ status = dwc2_check_periodic_bandwidth(hsotg, qh);
+ }
+
+ if (status) {
+ dev_dbg(hsotg->dev,
+ "%s: Insufficient periodic bandwidth for periodic transfer\n",
+ __func__);
+ return status;
+ }
+
+ if (hsotg->core_params->uframe_sched <= 0)
+ /* Reserve periodic channel */
+ hsotg->periodic_channels++;
+
+ /* Update claimed usecs per (micro)frame */
+ hsotg->periodic_usecs += qh->host_us;
+
+ return 0;
+}
+
+/**
* dwc2_do_unreserve() - Actually release the periodic reservation
*
* This function actually releases the periodic bandwidth that was reserved
@@ -393,51 +457,9 @@ static int dwc2_schedule_periodic(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
* that case.
*/
if (!qh->unreserve_pending) {
- if (hsotg->core_params->uframe_sched > 0) {
- int frame = -1;
-
- status = dwc2_find_uframe(hsotg, qh);
- if (status == 0)
- frame = 7;
- else if (status > 0)
- frame = status - 1;
-
- /* Set the new frame up */
- if (frame >= 0) {
- qh->next_active_frame &= ~0x7;
- qh->next_active_frame |= (frame & 7);
- dwc2_sch_dbg(hsotg,
- "QH=%p sched_p nxt=%04x, uf=%d\n",
- qh, qh->next_active_frame, frame);
- }
-
- if (status > 0)
- status = 0;
- } else {
- status = dwc2_periodic_channel_available(hsotg);
- if (status) {
- dev_info(hsotg->dev,
- "%s: No host channel available for periodic transfer\n",
- __func__);
- return status;
- }
-
- status = dwc2_check_periodic_bandwidth(hsotg, qh);
- }
-
- if (status) {
- dev_dbg(hsotg->dev,
- "%s: Insufficient periodic bandwidth for periodic transfer\n",
- __func__);
+ status = dwc2_do_reserve(hsotg, qh);
+ if (status)
return status;
- }
-
- if (hsotg->core_params->uframe_sched <= 0)
- /* Reserve periodic channel */
- hsotg->periodic_channels++;
-
- /* Update claimed usecs per (micro)frame */
- hsotg->periodic_usecs += qh->host_us;
}
qh->unreserve_pending = 0;
@@ -450,7 +472,7 @@ static int dwc2_schedule_periodic(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
list_add_tail(&qh->qh_list_entry,
&hsotg->periodic_sched_inactive);
- return status;
+ return 0;
}
/**
--
2.7.0.rc3.207.g0ac5344
More information about the Linux-rockchip
mailing list