[PATCH v2 1/4] dt-bindings: power: reset: add document for reboot-mode driver

[Rob Herring]

On Tue, Jan 12, 2016 at 07:29:49PM +0800, Andy Yan wrote:
> add device tree binding document for reboot-mode driver
> 
> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
> 
> ---
> 
> Changes in v2: None
> Changes in v1: None
> 
>  .../bindings/power/reset/reboot-mode.txt           | 41 +++++++++++++++++
>  .../bindings/power/reset/syscon-reboot-mode.txt    | 52 ++++++++++++++++++++++
>  2 files changed, 93 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/reboot-mode.txt
>  create mode 100644 Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt
> 
> diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/reboot-mode.txt
> new file mode 100644
> index 0000000..81d9f66
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.txt
> @@ -0,0 +1,41 @@
> +Generic reboot mode core map driver
> +
> +This driver get reboot mode arguments and call the write
> +interface to stores the magic value in special register
> +or ram . Then the bootloader can read it and take different
> +action according to the argument stored.
> +
> +Required properties:
> +- compatible: only support "syscon-reboot-mode" now.
> +
> +Each mode is represented as a sub-node of reboot_mode:
> +
> +Subnode required properties:
> +- linux,mode: reboot mode command,such as "loader", "recovery", "fastboot".
> +- loader,magic: magic number for the mode, this is vendor specific.
> +
> +Example:
> +	reboot_mode {

reboot-mode instead please.

> +		compatible = "syscon-reboot-mode";
> +		offset = <0x40>;

This doc by itself is a little confusing. For example, is a child of the 
syscon node? I would remove offset (and perhaps compatible) from this 
example.

> +
> +		loader {
> +			linux,mode = "loader";
> +			loader,magic = <BOOT_LOADER>;
> +		};

Sorry, my previous suggestion was not clear. I'm suggesting get rid of 
the subnodes and just do properties like this:

loader = <BOOT_LOADER>;
maskrom = <BOOT_MASKROM>;

That's the same amount of information unless node names and linux,mode 
values are going to diverge. Do they need to? I can't see a reason.


We need to be clear what loader means. More specifically, it is boot 
into bootloader shell. 

> +
> +		maskrom {

In theory, the bootrom could have multiple modes. This typically means a 
USB download mode. So perhaps a more precise name would be 
"rom-download". 

In chips I'm familiar with the bootrom mode is selected via a different 
mechanism than the secondary bootloader modes, but I suppose the same 
mechanism could be used.

> +			linux,mode = "maskrom";
> +			loader,magic = <BOOT_MASKROM>;
> +		};
> +
> +		recovery {
> +			linux,mode = "recovery";
> +			loader,magic = <BOOT_RECOVERY>;
> +		};
> +
> +		fastboot {
> +			linux,mode = "fastboot";
> +			loader,magic = <BOOT_FASTBOOT>;
> +		};