[PATCH v8 1/2] drm/rockchip: hdmi: add Innosilicon HDMI support
Yakir Yang
ykk at rock-chips.com
Wed Feb 3 01:34:40 PST 2016
Hi Jean,
Sorry about miss your comments :)
On 01/29/2016 03:20 PM, Jean-Francois Moine wrote:
> On Fri, 29 Jan 2016 14:47:39 +0800
> Yakir Yang <ykk at rock-chips.com> wrote:
>
>> The Innosilicon HDMI is a low power HDMI 1.4 transmitter
>> IP, and it have been integrated on some rockchip CPUs
>> (like RK3036, RK312x).
>>
>> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
>> ---
>> Changes in v8:
>> - Don't check whether encoder output format is RGB colorspace, cause driver
>> default configure the output colorspace to RGB. (ZhengYang)
>> - Correct the check condition in inno_hdmi_config_video_csc() (ZhengYang)
>> - if (data->enc_out_format == data->enc_out_format) {
>> + if (data->enc_in_format == data->enc_out_format) {
>>
>> Changes in v7:
>> - Correct the module licnese statement (Paul)
>> - MODULE_LICENSE("GPL");
>> + MODULE_LICENSE("GPLv2");
>> - Start indentation with tabs and fix the misspell in Kconfig (Paul)
>> - Carry the lost device-binding document (Heiko)
>>
>> Changes in v6:
>> - Rebase the Makefile/Kconfig files which add by Chris's rockchip-mipi driver (Caeser)
>>
>> Changes in v5:
>> - Use hdmi_infoframe helper functions to packed the infoframe (Russell)
>> - Remove the unused double wait_for_completion_timeout for ddc transfer (Russell)
>> - Remove the unused local variable in "inno_hdmi_i2c_write()" function (Russell)
>>
>> Changes in v4:
>> - Modify the commit title "drm/rockchip: hdmi: ..." (Mark)
>> - Correct the "DKMS" to "DPMS" (Mark)
>> - Fix over 80 characters problems (Mark)
>> - Remove encoder .prepare/.commit helper functions, and move the vop mode
>> configure function into encoder .enable helper functions. (Mark)
>>
>> Changes in v3:
>> - Use encoder enable/disable function, and remove the encoder DPMS function
>> - Keep HDMI PLL power on in standby mode
>>
>> Changes in v2:
>> - Using DRM atomic helper functions for connector init (Mark)
>> - Remove "hdmi->connector.encoder = encoder;" (Mark)
>>
>> drivers/gpu/drm/rockchip/Kconfig | 8 +
>> drivers/gpu/drm/rockchip/Makefile | 1 +
>> drivers/gpu/drm/rockchip/inno_hdmi.c | 939 +++++++++++++++++++++++++++++++++++
>> drivers/gpu/drm/rockchip/inno_hdmi.h | 362 ++++++++++++++
>> 4 files changed, 1310 insertions(+)
>> create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.c
>> create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.h
>>
>> diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
>> index 8573985..76b3362 100644
>> --- a/drivers/gpu/drm/rockchip/Kconfig
>> +++ b/drivers/gpu/drm/rockchip/Kconfig
>> @@ -35,3 +35,11 @@ config ROCKCHIP_DW_MIPI_DSI
>> for the Synopsys DesignWare HDMI driver. If you want to
>> enable MIPI DSI on RK3288 based SoC, you should selet this
>> option.
>> +
>> +config ROCKCHIP_INNO_HDMI
>> + tristate "Rockchip specific extensions for Innosilicon HDMI"
>> + depends on DRM_ROCKCHIP
>> + help
>> + This selects support for Rockchip SoC specific extensions
>> + for the Innosilicon HDMI driver. If you want to enable
>> + HDMI on RK3036 based SoC, you should select this option.
>> diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
>> index f6a809a..df8fbef 100644
>> --- a/drivers/gpu/drm/rockchip/Makefile
>> +++ b/drivers/gpu/drm/rockchip/Makefile
>> @@ -8,5 +8,6 @@ rockchipdrm-$(CONFIG_DRM_FBDEV_EMULATION) += rockchip_drm_fbdev.o
>>
>> obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
>> obj-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi.o
>> +obj-$(CONFIG_ROCKCHIP_INNO_HDMI) += inno_hdmi.o
>>
>> obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_vop_reg.o
>> diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
>> new file mode 100644
>> index 0000000..c99d88d
>> --- /dev/null
>> +++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
>> @@ -0,0 +1,939 @@
>> +/*
>> + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
>> + * Zheng Yang <zhengyang at rock-chips.com>
>> + * Yakir Yang <ykk at rock-chips.com>
>> + *
>> + * This software is licensed under the terms of the GNU General Public
>> + * License version 2, as published by the Free Software Foundation, and
>> + * may be copied, distributed, and modified under those terms.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/irq.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/err.h>
>> +#include <linux/hdmi.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/of_device.h>
>> +
>> +#include <drm/drm_of.h>
>> +#include <drm/drmP.h>
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_crtc_helper.h>
>> +#include <drm/drm_edid.h>
>> +#include <drm/drm_encoder_slave.h>
> This is not needed.
Do you mean the "drm_encoder_slave.h" file ?
Yep, seems I haven't called ant encoder slave helper functions, thanks.
>
>> +
>> +#include "rockchip_drm_drv.h"
>> +#include "rockchip_drm_vop.h"
>> +
>> +#include "inno_hdmi.h"
> [snip]
>
More information about the Linux-rockchip
mailing list