[PATCH] i2c: rk3x: keep i2c irq ON in suspend

[David.Wu]

Hi Heiko,

在 2016/12/5 18:54, Heiko Stuebner 写道:
> Hi David,
>
> Am Montag, 5. Dezember 2016, 16:02:59 CET schrieb David Wu:
>> During suspend there may still be some i2c access happening.
>> And if we don't keep i2c irq ON, there may be i2c access timeout if
>> i2c is in irq mode of operation.
>
> can you describe the issue you're trying to fix a bit more please?

Sometimes we could see the i2c timeout errors during suspend/resume, 
which makes the duration of suspend/resume too longer.

[  484.171541] CPU4: Booted secondary processor [410fd082]
[  485.172777] rk3x-i2c ff3c0000.i2c: timeout, ipd: 0x10, state: 1
[  486.172760] rk3x-i2c ff3c0000.i2c: timeout, ipd: 0x10, state: 1
[  487.172759] rk3x-i2c ff3c0000.i2c: timeout, ipd: 0x10, state: 1
[  487.172840] cpu cpu4: _set_opp_voltage: failed to set voltage (800000 
800000 800000 mV): -110
[  487.172874] cpu cpu4: failed to set volt 800000

>
> I.e. I'd think the i2c-core does suspend i2c-client devices first, so that
> these should be able to finish up their ongoing transfers and not start any
> new ones instead?
>
> Your irq can still happen slightly after the system started going to actually
> sleep, so to me it looks like you just widened the window where irqs can be
> handled. Especially as your irq could also just simply stem from the start
> state, so you cannot even be sure if your transaction actually is finished.

Okay, you are right. I want to give it a double insurance at first, but 
it may hide the unhappend issue.

>
> So to me it looks like the i2c-connected device driver should be fixed instead?

I tell them to fix it in rk808 driver.

>
> In the past I solved this for example in the zforce_ts driver [0] to
> prevent i2c transfers from happening during suspend.
>
>
> Heiko
>
> [0] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/input/touchscreen/zforce_ts.c
>
>
>>
>> Signed-off-by: David Wu <david.wu at rock-chips.com>
>> ---
>>  drivers/i2c/busses/i2c-rk3x.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
>> index df22066..67af32a 100644
>> --- a/drivers/i2c/busses/i2c-rk3x.c
>> +++ b/drivers/i2c/busses/i2c-rk3x.c
>> @@ -1261,7 +1261,7 @@ static int rk3x_i2c_probe(struct platform_device
>> *pdev) }
>>
>>  	ret = devm_request_irq(&pdev->dev, irq, rk3x_i2c_irq,
>> -			       0, dev_name(&pdev->dev), i2c);
>> +			       IRQF_NO_SUSPEND, dev_name(&pdev->dev), i2c);
>>  	if (ret < 0) {
>>  		dev_err(&pdev->dev, "cannot request IRQ\n");
>>  		return ret;
>
>
>
>
>