[PATCH v3 1/5] net: stmmac: dwmac-rk: fixes the gmac resume after PD on/off

[Caesar Wang]

From: Roger Chen <roger.chen at rock-chips.com>

GMAC Power Domain(PD) will be disabled during suspend.
That will causes GRF registers reset.
So corresponding GRF registers for GMAC must be setup again.

Signed-off-by: Roger Chen <roger.chen at rock-chips.com>
Signed-off-by: Caesar Wang <wxt at rock-chips.com>
---

Changes in v3: None
Changes in v2:
- rk_gmac_powerup instead of the rk_gmac_init.

 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 9210591..289e7a6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -629,6 +629,16 @@ static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
 							"rockchip,grf");
 	bsp_priv->pdev = pdev;
 
+	gmac_clk_init(bsp_priv);
+
+	return bsp_priv;
+}
+
+static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
+{
+	int ret;
+	struct device *dev = &bsp_priv->pdev->dev;
+
 	/*rmii or rgmii*/
 	if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RGMII) {
 		dev_info(dev, "init for RGMII\n");
@@ -641,15 +651,6 @@ static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
 		dev_err(dev, "NO interface defined!\n");
 	}
 
-	gmac_clk_init(bsp_priv);
-
-	return bsp_priv;
-}
-
-static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
-{
-	int ret;
-
 	ret = phy_power_on(bsp_priv, true);
 	if (ret)
 		return ret;
-- 
1.9.1