[PATCH 2/2] drm/rockchip: Use DRM_DEV_ERROR in vop

[Sean Paul]

On Thu, Aug 18, 2016 at 1:53 AM, Mark yao <mark.yao at rock-chips.com> wrote:
> On 2016年08月13日 01:00, Sean Paul wrote:
>>
>> Since we can have multiple vops, use DRM_DEV_ERROR to
>> make logs easier to process.
>>
>> Signed-off-by: Sean Paul <seanpaul at chromium.org>
>
>
> looks good for me
>
> Acked-by: Mark Yao <mark.yao at rockchip.com>
>

Applied to drm-misc

>> ---
>>   drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 24
>> ++++++++++++++----------
>>   1 file changed, 14 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
>> b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
>> index 31744fe..ec8ad00 100644
>> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
>> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
>> @@ -238,7 +238,7 @@ static enum vop_data_format
>> vop_convert_format(uint32_t format)
>>         case DRM_FORMAT_NV24:
>>                 return VOP_FMT_YUV444SP;
>>         default:
>> -               DRM_ERROR("unsupport format[%08x]\n", format);
>> +               DRM_ERROR("unsupported format[%08x]\n", format);
>>                 return -EINVAL;
>>         }
>>   }
>> @@ -315,7 +315,7 @@ static void scl_vop_cal_scl_fac(struct vop *vop, const
>> struct vop_win_data *win,
>>         int vskiplines = 0;
>>         if (dst_w > 3840) {
>> -               DRM_ERROR("Maximum destination width (3840) exceeded\n");
>> +               DRM_DEV_ERROR(vop->dev, "Maximum dst width (3840)
>> exceeded\n");
>>                 return;
>>         }
>>   @@ -353,11 +353,11 @@ static void scl_vop_cal_scl_fac(struct vop *vop,
>> const struct vop_win_data *win,
>>         VOP_SCL_SET_EXT(vop, win, lb_mode, lb_mode);
>>         if (lb_mode == LB_RGB_3840X2) {
>>                 if (yrgb_ver_scl_mode != SCALE_NONE) {
>> -                       DRM_ERROR("ERROR : not allow yrgb ver scale\n");
>> +                       DRM_DEV_ERROR(vop->dev, "not allow yrgb ver
>> scale\n");
>>                         return;
>>                 }
>>                 if (cbcr_ver_scl_mode != SCALE_NONE) {
>> -                       DRM_ERROR("ERROR : not allow cbcr ver scale\n");
>> +                       DRM_DEV_ERROR(vop->dev, "not allow cbcr ver
>> scale\n");
>>                         return;
>>                 }
>>                 vsu_mode = SCALE_UP_BIL;
>> @@ -970,7 +970,8 @@ static void vop_crtc_enable(struct drm_crtc *crtc)
>>                 VOP_CTRL_SET(vop, mipi_en, 1);
>>                 break;
>>         default:
>> -               DRM_ERROR("unsupport connector_type[%d]\n",
>> s->output_type);
>> +               DRM_DEV_ERROR(vop->dev, "unsupported connector_type
>> [%d]\n",
>> +                             s->output_type);
>>         }
>>         VOP_CTRL_SET(vop, out_mode, s->output_mode);
>>   @@ -1154,7 +1155,8 @@ static irqreturn_t vop_isr(int irq, void *data)
>>         /* Unhandled irqs are spurious. */
>>         if (active_irqs)
>> -               DRM_ERROR("Unknown VOP IRQs: %#02x\n", active_irqs);
>> +               DRM_DEV_ERROR(vop->dev, "Unknown VOP IRQs: %#02x\n",
>> +                             active_irqs);
>>         return ret;
>>   }
>> @@ -1189,7 +1191,8 @@ static int vop_create_crtc(struct vop *vop)
>>                                                win_data->phy->nformats,
>>                                                win_data->type, NULL);
>>                 if (ret) {
>> -                       DRM_ERROR("failed to initialize plane\n");
>> +                       DRM_DEV_ERROR(vop->dev, "failed to init plane
>> %d\n",
>> +                                     ret);
>>                         goto err_cleanup_planes;
>>                 }
>>   @@ -1227,7 +1230,8 @@ static int vop_create_crtc(struct vop *vop)
>>                                                win_data->phy->nformats,
>>                                                win_data->type, NULL);
>>                 if (ret) {
>> -                       DRM_ERROR("failed to initialize overlay plane\n");
>> +                       DRM_DEV_ERROR(vop->dev, "failed to init overlay
>> %d\n",
>> +                                     ret);
>>                         goto err_cleanup_crtc;
>>                 }
>>                 drm_plane_helper_add(&vop_win->base, &plane_helper_funcs);
>> @@ -1235,8 +1239,8 @@ static int vop_create_crtc(struct vop *vop)
>>         port = of_get_child_by_name(dev->of_node, "port");
>>         if (!port) {
>> -               DRM_ERROR("no port node found in %s\n",
>> -                         dev->of_node->full_name);
>> +               DRM_DEV_ERROR(vop->dev, "no port node found in %s\n",
>> +                             dev->of_node->full_name);
>>                 ret = -ENOENT;
>>                 goto err_cleanup_crtc;
>>         }
>
>
>
> --
> Ｍark Yao
>
>