[PATCH v2] drm/bridge: analogix_dp: Ensure the panel is properly prepared/unprepared
Archit Taneja
architt at codeaurora.org
Tue Aug 16 22:08:10 PDT 2016
On 08/09/2016 08:05 AM, Yakir Yang wrote:
> + Archit
>
>
> On 08/09/2016 02:53 AM, Sean Paul wrote:
>> Instead of just preparing the panel on bind, actually prepare/unprepare
>> during modeset/disable. The panel must be prepared in order to read hpd
>> status and edid, so we need to keep state around the prepares in order
>> to ensure we don't accidentally turn the panel off at the wrong time.
>>
>> Signed-off-by: Sean Paul <seanpaul at chromium.org>
>
> Reviewed-by: Yakir Yang <ykk at rock-chips.com>
>
> And I also tested this patch on RK3399 Kevin board, panel works rightly,
> so:
> Tested-by: Yakir Yang <ykk at rock-chips.com>
>
> Also add Archit into CC list, guess this patch should go through his
> drm_bridge's tree.
Reviewed-by: Archit Taneja <architt at codeaurora.org>
>
> Thanks,
> - Yakir
>
>> ---
>>
>> Changes in v2:
>> - Added panel_is_modeset state/lock to avoid racing detect with
>> modeset (marcheu)
>> - Added prepare/unprepare in .get_modes (yakir)
>>
>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 101
>> ++++++++++++++++++---
>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 3 +
>> 2 files changed, 93 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>> b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>> index 32715da..47c449a 100644
>> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>> @@ -923,11 +923,63 @@ static void analogix_dp_commit(struct
>> analogix_dp_device *dp)
>> analogix_dp_start_video(dp);
>> }
>> +/*
>> + * This function is a bit of a catch-all for panel preparation,
>> hopefully
>> + * simplifying the logic of functions that need to prepare/unprepare
>> the panel
>> + * below.
>> + *
>> + * If @prepare is true, this function will prepare the panel.
>> Conversely, if it
>> + * is false, the panel will be unprepared.
>> + *
>> + * If @is_modeset_prepare is true, the function will disregard the
>> current state
>> + * of the panel and either prepare/unprepare the panel based on
>> @prepare. Once
>> + * it finishes, it will update dp->panel_is_modeset to reflect the
>> current state
>> + * of the panel.
>> + */
>> +static int analogix_dp_prepare_panel(struct analogix_dp_device *dp,
>> + bool prepare, bool is_modeset_prepare)
>> +{
>> + int ret = 0;
>> +
>> + if (!dp->plat_data->panel)
>> + return 0;
>> +
>> + mutex_lock(&dp->panel_lock);
>> +
>> + /*
>> + * Exit early if this is a temporary prepare/unprepare and we're
>> already
>> + * modeset (since we neither want to prepare twice or unprepare
>> early).
>> + */
>> + if (dp->panel_is_modeset && !is_modeset_prepare)
>> + goto out;
>> +
>> + if (prepare)
>> + ret = drm_panel_prepare(dp->plat_data->panel);
>> + else
>> + ret = drm_panel_unprepare(dp->plat_data->panel);
>> +
>> + if (ret)
>> + goto out;
>> +
>> + if (is_modeset_prepare)
>> + dp->panel_is_modeset = prepare;
>> +
>> +out:
>> + mutex_unlock(&dp->panel_lock);
>> + return ret;
>> +}
>> +
>> int analogix_dp_get_modes(struct drm_connector *connector)
>> {
>> struct analogix_dp_device *dp = to_dp(connector);
>> struct edid *edid = (struct edid *)dp->edid;
>> - int num_modes = 0;
>> + int ret, num_modes = 0;
>> +
>> + ret = analogix_dp_prepare_panel(dp, true, false);
>> + if (ret) {
>> + DRM_ERROR("Failed to prepare panel (%d)\n", ret);
>> + return 0;
>> + }
>> if (analogix_dp_handle_edid(dp) == 0) {
>> drm_mode_connector_update_edid_property(&dp->connector, edid);
>> @@ -940,6 +992,10 @@ int analogix_dp_get_modes(struct drm_connector
>> *connector)
>> if (dp->plat_data->get_modes)
>> num_modes += dp->plat_data->get_modes(dp->plat_data,
>> connector);
>> + ret = analogix_dp_prepare_panel(dp, false, false);
>> + if (ret)
>> + DRM_ERROR("Failed to unprepare panel (%d)\n", ret);
>> +
>> return num_modes;
>> }
>> @@ -960,11 +1016,23 @@ enum drm_connector_status
>> analogix_dp_detect(struct drm_connector *connector, bool force)
>> {
>> struct analogix_dp_device *dp = to_dp(connector);
>> + enum drm_connector_status status = connector_status_disconnected;
>> + int ret;
>> - if (analogix_dp_detect_hpd(dp))
>> + ret = analogix_dp_prepare_panel(dp, true, false);
>> + if (ret) {
>> + DRM_ERROR("Failed to prepare panel (%d)\n", ret);
>> return connector_status_disconnected;
>> + }
>> +
>> + if (!analogix_dp_detect_hpd(dp))
>> + status = connector_status_connected;
>> - return connector_status_connected;
>> + ret = analogix_dp_prepare_panel(dp, false, false);
>> + if (ret)
>> + DRM_ERROR("Failed to unprepare panel (%d)\n", ret);
>> +
>> + return status;
>> }
>> static void analogix_dp_connector_destroy(struct drm_connector
>> *connector)
>> @@ -1035,6 +1103,16 @@ static int analogix_dp_bridge_attach(struct
>> drm_bridge *bridge)
>> return 0;
>> }
>> +static void analogix_dp_bridge_pre_enable(struct drm_bridge *bridge)
>> +{
>> + struct analogix_dp_device *dp = bridge->driver_private;
>> + int ret;
>> +
>> + ret = analogix_dp_prepare_panel(dp, true, true);
>> + if (ret)
>> + DRM_ERROR("failed to setup the panel ret = %d\n", ret);
>> +}
>> +
>> static void analogix_dp_bridge_enable(struct drm_bridge *bridge)
>> {
>> struct analogix_dp_device *dp = bridge->driver_private;
>> @@ -1058,6 +1136,7 @@ static void analogix_dp_bridge_enable(struct
>> drm_bridge *bridge)
>> static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
>> {
>> struct analogix_dp_device *dp = bridge->driver_private;
>> + int ret;
>> if (dp->dpms_mode != DRM_MODE_DPMS_ON)
>> return;
>> @@ -1077,6 +1156,10 @@ static void analogix_dp_bridge_disable(struct
>> drm_bridge *bridge)
>> pm_runtime_put_sync(dp->dev);
>> + ret = analogix_dp_prepare_panel(dp, false, true);
>> + if (ret)
>> + DRM_ERROR("failed to setup the panel ret = %d\n", ret);
>> +
>> dp->dpms_mode = DRM_MODE_DPMS_OFF;
>> }
>> @@ -1165,9 +1248,9 @@ static void analogix_dp_bridge_nop(struct
>> drm_bridge *bridge)
>> }
>> static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
>> + .pre_enable = analogix_dp_bridge_pre_enable,
>> .enable = analogix_dp_bridge_enable,
>> .disable = analogix_dp_bridge_disable,
>> - .pre_enable = analogix_dp_bridge_nop,
>> .post_disable = analogix_dp_bridge_nop,
>> .mode_set = analogix_dp_bridge_mode_set,
>> .attach = analogix_dp_bridge_attach,
>> @@ -1254,6 +1337,9 @@ int analogix_dp_bind(struct device *dev, struct
>> drm_device *drm_dev,
>> dp->dev = &pdev->dev;
>> dp->dpms_mode = DRM_MODE_DPMS_OFF;
>> + mutex_init(&dp->panel_lock);
>> + dp->panel_is_modeset = false;
>> +
>> /*
>> * platform dp driver need containor_of the plat_data to get
>> * the driver private data, so we need to store the point of
>> @@ -1333,13 +1419,6 @@ int analogix_dp_bind(struct device *dev, struct
>> drm_device *drm_dev,
>> phy_power_on(dp->phy);
>> - if (dp->plat_data->panel) {
>> - if (drm_panel_prepare(dp->plat_data->panel)) {
>> - DRM_ERROR("failed to setup the panel\n");
>> - return -EBUSY;
>> - }
>> - }
>> -
>> analogix_dp_init_dp(dp);
>> ret = devm_request_threaded_irq(&pdev->dev, dp->irq,
>> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
>> b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
>> index b456380..43108d7 100644
>> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
>> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
>> @@ -178,6 +178,9 @@ struct analogix_dp_device {
>> bool force_hpd;
>> unsigned char edid[EDID_BLOCK_LENGTH * 2];
>> + struct mutex panel_lock;
>> + bool panel_is_modeset;
>> +
>> struct analogix_dp_plat_data *plat_data;
>> };
>
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
More information about the Linux-rockchip
mailing list