[PATCH v2] drm/bridge: analogix_dp: Ensure the panel is properly prepared/unprepared
Yakir Yang
ykk at rock-chips.com
Mon Aug 8 19:35:57 PDT 2016
+ Archit
On 08/09/2016 02:53 AM, Sean Paul wrote:
> Instead of just preparing the panel on bind, actually prepare/unprepare
> during modeset/disable. The panel must be prepared in order to read hpd
> status and edid, so we need to keep state around the prepares in order
> to ensure we don't accidentally turn the panel off at the wrong time.
>
> Signed-off-by: Sean Paul <seanpaul at chromium.org>
Reviewed-by: Yakir Yang <ykk at rock-chips.com>
And I also tested this patch on RK3399 Kevin board, panel works rightly, so:
Tested-by: Yakir Yang <ykk at rock-chips.com>
Also add Archit into CC list, guess this patch should go through his
drm_bridge's tree.
Thanks,
- Yakir
> ---
>
> Changes in v2:
> - Added panel_is_modeset state/lock to avoid racing detect with modeset (marcheu)
> - Added prepare/unprepare in .get_modes (yakir)
>
> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 101 ++++++++++++++++++---
> drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 3 +
> 2 files changed, 93 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> index 32715da..47c449a 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> @@ -923,11 +923,63 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
> analogix_dp_start_video(dp);
> }
>
> +/*
> + * This function is a bit of a catch-all for panel preparation, hopefully
> + * simplifying the logic of functions that need to prepare/unprepare the panel
> + * below.
> + *
> + * If @prepare is true, this function will prepare the panel. Conversely, if it
> + * is false, the panel will be unprepared.
> + *
> + * If @is_modeset_prepare is true, the function will disregard the current state
> + * of the panel and either prepare/unprepare the panel based on @prepare. Once
> + * it finishes, it will update dp->panel_is_modeset to reflect the current state
> + * of the panel.
> + */
> +static int analogix_dp_prepare_panel(struct analogix_dp_device *dp,
> + bool prepare, bool is_modeset_prepare)
> +{
> + int ret = 0;
> +
> + if (!dp->plat_data->panel)
> + return 0;
> +
> + mutex_lock(&dp->panel_lock);
> +
> + /*
> + * Exit early if this is a temporary prepare/unprepare and we're already
> + * modeset (since we neither want to prepare twice or unprepare early).
> + */
> + if (dp->panel_is_modeset && !is_modeset_prepare)
> + goto out;
> +
> + if (prepare)
> + ret = drm_panel_prepare(dp->plat_data->panel);
> + else
> + ret = drm_panel_unprepare(dp->plat_data->panel);
> +
> + if (ret)
> + goto out;
> +
> + if (is_modeset_prepare)
> + dp->panel_is_modeset = prepare;
> +
> +out:
> + mutex_unlock(&dp->panel_lock);
> + return ret;
> +}
> +
> int analogix_dp_get_modes(struct drm_connector *connector)
> {
> struct analogix_dp_device *dp = to_dp(connector);
> struct edid *edid = (struct edid *)dp->edid;
> - int num_modes = 0;
> + int ret, num_modes = 0;
> +
> + ret = analogix_dp_prepare_panel(dp, true, false);
> + if (ret) {
> + DRM_ERROR("Failed to prepare panel (%d)\n", ret);
> + return 0;
> + }
>
> if (analogix_dp_handle_edid(dp) == 0) {
> drm_mode_connector_update_edid_property(&dp->connector, edid);
> @@ -940,6 +992,10 @@ int analogix_dp_get_modes(struct drm_connector *connector)
> if (dp->plat_data->get_modes)
> num_modes += dp->plat_data->get_modes(dp->plat_data, connector);
>
> + ret = analogix_dp_prepare_panel(dp, false, false);
> + if (ret)
> + DRM_ERROR("Failed to unprepare panel (%d)\n", ret);
> +
> return num_modes;
> }
>
> @@ -960,11 +1016,23 @@ enum drm_connector_status
> analogix_dp_detect(struct drm_connector *connector, bool force)
> {
> struct analogix_dp_device *dp = to_dp(connector);
> + enum drm_connector_status status = connector_status_disconnected;
> + int ret;
>
> - if (analogix_dp_detect_hpd(dp))
> + ret = analogix_dp_prepare_panel(dp, true, false);
> + if (ret) {
> + DRM_ERROR("Failed to prepare panel (%d)\n", ret);
> return connector_status_disconnected;
> + }
> +
> + if (!analogix_dp_detect_hpd(dp))
> + status = connector_status_connected;
>
> - return connector_status_connected;
> + ret = analogix_dp_prepare_panel(dp, false, false);
> + if (ret)
> + DRM_ERROR("Failed to unprepare panel (%d)\n", ret);
> +
> + return status;
> }
>
> static void analogix_dp_connector_destroy(struct drm_connector *connector)
> @@ -1035,6 +1103,16 @@ static int analogix_dp_bridge_attach(struct drm_bridge *bridge)
> return 0;
> }
>
> +static void analogix_dp_bridge_pre_enable(struct drm_bridge *bridge)
> +{
> + struct analogix_dp_device *dp = bridge->driver_private;
> + int ret;
> +
> + ret = analogix_dp_prepare_panel(dp, true, true);
> + if (ret)
> + DRM_ERROR("failed to setup the panel ret = %d\n", ret);
> +}
> +
> static void analogix_dp_bridge_enable(struct drm_bridge *bridge)
> {
> struct analogix_dp_device *dp = bridge->driver_private;
> @@ -1058,6 +1136,7 @@ static void analogix_dp_bridge_enable(struct drm_bridge *bridge)
> static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
> {
> struct analogix_dp_device *dp = bridge->driver_private;
> + int ret;
>
> if (dp->dpms_mode != DRM_MODE_DPMS_ON)
> return;
> @@ -1077,6 +1156,10 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
>
> pm_runtime_put_sync(dp->dev);
>
> + ret = analogix_dp_prepare_panel(dp, false, true);
> + if (ret)
> + DRM_ERROR("failed to setup the panel ret = %d\n", ret);
> +
> dp->dpms_mode = DRM_MODE_DPMS_OFF;
> }
>
> @@ -1165,9 +1248,9 @@ static void analogix_dp_bridge_nop(struct drm_bridge *bridge)
> }
>
> static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
> + .pre_enable = analogix_dp_bridge_pre_enable,
> .enable = analogix_dp_bridge_enable,
> .disable = analogix_dp_bridge_disable,
> - .pre_enable = analogix_dp_bridge_nop,
> .post_disable = analogix_dp_bridge_nop,
> .mode_set = analogix_dp_bridge_mode_set,
> .attach = analogix_dp_bridge_attach,
> @@ -1254,6 +1337,9 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
> dp->dev = &pdev->dev;
> dp->dpms_mode = DRM_MODE_DPMS_OFF;
>
> + mutex_init(&dp->panel_lock);
> + dp->panel_is_modeset = false;
> +
> /*
> * platform dp driver need containor_of the plat_data to get
> * the driver private data, so we need to store the point of
> @@ -1333,13 +1419,6 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
>
> phy_power_on(dp->phy);
>
> - if (dp->plat_data->panel) {
> - if (drm_panel_prepare(dp->plat_data->panel)) {
> - DRM_ERROR("failed to setup the panel\n");
> - return -EBUSY;
> - }
> - }
> -
> analogix_dp_init_dp(dp);
>
> ret = devm_request_threaded_irq(&pdev->dev, dp->irq,
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> index b456380..43108d7 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> @@ -178,6 +178,9 @@ struct analogix_dp_device {
> bool force_hpd;
> unsigned char edid[EDID_BLOCK_LENGTH * 2];
>
> + struct mutex panel_lock;
> + bool panel_is_modeset;
> +
> struct analogix_dp_plat_data *plat_data;
> };
>
More information about the Linux-rockchip
mailing list