[PATCH 2/3] ASoC: simple-card: Add support jack detection via codec

[Rob Herring]

On Mon, Apr 18, 2016 at 04:17:31PM +0800, Xing Zheng wrote:
> In most cases, many codecs already supports jack detection, previouslly,
> we need to create a customized machine driver every time.
> 
> Hence, the simple-card need to support use them dynamically via parse dts
> file for better flexibility.
> 
> Signed-off-by: Xing Zheng <zhengxing at rock-chips.com>
> ---
> 
>  .../devicetree/bindings/sound/simple-card.txt      |   17 +++
>  sound/soc/generic/simple-card.c                    |  126 +++++++++++++++++++-
>  2 files changed, 140 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt
> index cf3979e..d25c8eb 100644
> --- a/Documentation/devicetree/bindings/sound/simple-card.txt
> +++ b/Documentation/devicetree/bindings/sound/simple-card.txt
> @@ -22,6 +22,23 @@ Optional properties:
>  					  headphones are attached.
>  - simple-audio-card,mic-det-gpio	: Reference to GPIO that signals when
>  					  a microphone is attached.
> +- simple-audio-card,codec-jack		: A list of the codec supports jack detection.
> +					  The jack types which are supported refer to include/sound/jack.h.
> +					  All of the jack types:
> +						"JACK_HEADPHONE",
> +						"JACK_MICROPHONE",
> +						"JACK_HEADSET",
> +						"JACK_LINEOUT",
> +						"JACK_MECHANICAL",
> +						"JACK_VIDEOOUT",
> +						"JACK_AVOUT",
> +						"JACK_LINEIN",
> +						"JACK_BTN_0",
> +						"JACK_BTN_1",
> +						"JACK_BTN_2",
> +						"JACK_BTN_3",
> +						"JACK_BTN_4",
> +						"JACK_BTN_5".

simple-card is not so simple...

I think this information be part of the codec node if the codec 
provides the functionality. The binding should not be different whether 
a codec is part of simple-card or not. Also, I would make all these just 
boolean props. 

Rob