[PATCH 1/2] ASoC: rockchip: i2s: add 8 channels capture and lrck-mode support
broonie at kernel.org
Wed Sep 30 11:46:55 PDT 2015
On Mon, Sep 28, 2015 at 04:16:12PM +0800, sugar wrote:
> 在 9/24/2015 00:24, Mark Brown 写道:
> >My initial thought here is that the machine driver should be responsible
> >for setting this and then the DAI driver should check to see if
> >symmetric_rates are in use and configure itself appropriately. Is there
> >a reason why this won't work here?
> It's for i2s ip configuration, in the most situation, there is no need
> to use this property, except one case:
> In order to save gpio pins for other function use, we may use single
> lrck(tx or rx) pin. of course, it depends on product design. when in i2s
> slave mode, we need to configure this to share lrck with tx/rx inside i2s
> symmetric_rates flag works fine on rockchip platform, but it can't cover the
> above case.
> Do you have any suggestion about this or maybe there is no need to upstream
> this special part?
What makes you say that the symmetric_rates flag can't be used to cover
this case? What you describe above is hte normal reason for needing to
enforce symmetric_rates. The driver should be able to check if the flag
has been set just as well as the core is.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 473 bytes
Desc: Digital signature
More information about the Linux-rockchip