[PATCH v5 05/17] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range

[Krzysztof Kozlowski]

On 30.09.2015 17:20, Yakir Yang wrote:
> Hi Krzysztof,
> 
> On 09/30/2015 03:34 PM, Krzysztof Kozlowski wrote:
>> On 30.09.2015 16:19, Yakir Yang wrote:
>>> Hi Krzysztof,
>>>
>>> On 09/30/2015 01:32 PM, Krzysztof Kozlowski wrote:
>>>> On 22.09.2015 16:37, Yakir Yang wrote:
>>>>> Both hsync/vsync polarity and interlace mode can be parsed from
>>>>> drm display mode, and dynamic_range and ycbcr_coeff can be judge
>>>>> by the video code.
>>>>>
>>>>> But presumably Exynos still relies on the DT properties, so take
>>>>> good use of mode_fixup() in to achieve the compatibility hacks.
>>>>>
>>>>> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
>>>>> ---
>>>>> Changes in v5:
>>>>> - Switch video timing type to "u32", so driver could use "of_property_read_u32"
>>>>>   to get the backword timing values. 
>>>> Okay
>>>>
>>>>> Krzysztof suggest me that driver could use
>>>>>   the "of_property_read_bool" to get backword timing values, but that interfacs
>>>>>   would modify the original drm_display_mode timing directly (whether those
>>>>>   properties exists or not).
>>>> Hmm, I don't understand. You have a:
>>>> 	struct video_info {
>>>> 		bool h_sync_polarity;
>>>> 		bool v_sync_polarity;
>>>> 		bool interlaced;
>>>> 	};
>>>>
>>>> so what is wrong with:
>>>> 	dp_video_config->h_sync_polarity =
>>>> 		of_property_read_bool(dp_node, "hsync-active-high");
>>>>
>>>> Is it exactly the same binding as previously?
>>> Yes, it is the same binding as previously. But just a note that we already
>>> mark those DT binding as deprecated.
>>>
>>> +-interlaced:            deprecated prop that can parsed frm drm_display_mode.
>>> +-vsync-active-high:     deprecated prop that can parsed frm drm_display_mode.
>>> +-hsync-active-high:     deprecated prop that can parsed frm drm_display_mode.
>>>
>>>
>>> For now those values should come from "struct drm_display_mode",
>>> and we already parsed them out from "drm_display_mode" before
>>> driver provide the backward compatibility.
>>>
>>> Let's used the "hsync-active-high" example:
>>>     As for now the code would like:
>>>     static void analogix_dp_bridge_mode_set(...)
>>>     {
>>>         // Parsed timing value from "drm_display_mode"
>>>         video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
>>>
>>>         // Try to detect the deprecated property, providing
>>>         // the backward compatibility
>>>         of_property_read_u32(dp_node, "hsync-active-high",
>>>                                  &video->h_sync_polarity);    
>>>
>>>         /*
>>>          * In this case, if "hsync-active-high" property haven't been
>>>          * found, then the video timing "h_sync_polarity" would  keep
>>>          * no change, keeping the parsed value from "drm_display_mode"
>>>          */     
>>>     }   
>>>
>>>     But if keep the "of_property_read_bool", then code would like:
>>>     static void analogix_dp_bridge_mode_set(...)
>>>     {
>>>         // Parsed timing value from "drm_display_mode"
>>>         video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
>>>
>>>         // Try to detect the deprecated property, providing
>>>         // the backward compatibility
>>>         video->h_sync_polarity =
>>>                     of_property_read_bool(dp_node, "hsync-active-high");
>>>    
>>>
>>>         /*
>>>          * In this case, if "hsync-active-high" property haven't been
>>>          * found, then the video timing "h_sync_polarity" would just
>>>          * modify to "false". That is the place we don't want, cause
>>>          * it would always modify the timing value parsed from
>>>          * "drm_display_mode"
>>>          */  
>>>     }   
>>>
>> OK, I see the point of overwriting values from drm_display_mode. However
>> I think you changed the binding. I believe the of_property_read_u32()
>> will behave differently for such DTS:
>>
>> exynos_dp {
>> 	...
>> 	hsync-active-high;
>> }
>>
>> It will return -EOVERFLOW which means it would be broken now...
> 
> Whoops, thanks for your remind, after try that, I do see over flow error.
> static void *of_find_property_value_of_size(const struct device_node *np,
>                         const char *propname, u32 len)
> {
>         ....
>         if (len > prop->length)
>                 return ERR_PTR(-EOVERFLOW);
>         ...
> }
> 
> So I though code should be:
>     if (of_property_read_bool(dp_node, "hsync-active-high"))
>         video->h_sync_polarity = true;

Looks good.

> 
> And we can't provide full backward compatibility for this property, cause
> the previous exynos_dp driver would set this timing value to "false" when
> property not defined, but analogix_dp driver keep this timing value
> corresponding to "drm_display_mode" when property not found.

Indeed, the behaviour changes. I don't know if this is important issue...

Best regards,
Krzysztof