[PATCH v4 03/16] drm: bridge: analogix/dp: split exynos dp driver to bridge dir

Yakir Yang ykk at rock-chips.com
Sun Sep 6 00:49:56 PDT 2015


Hi Krzysztof,

在 09/04/2015 08:41 AM, Krzysztof Kozlowski 写道:
> On 03.09.2015 14:30, Yakir Yang wrote:
>> Hi Krzysztof,
>>
>> 在 09/03/2015 08:58 AM, Krzysztof Kozlowski 写道:
>>> On 01.09.2015 14:49, Yakir Yang wrote:
>>>> Split the dp core driver from exynos directory to bridge
>>>> directory, and rename the core driver to analogix_dp_*,
>>>> leave the platform code to analogix_dp-exynos.
>>>>
>>>> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
>>>> ---
>>>> Changes in v4:
>>>> - Take Rob suggest, update "analogix,hpd-gpios" to "hpd-gpios" DT
>>>> propery.
>>>> - Take Jingoo suggest, rename "analogix_dp-exynos.c" file name to
>>>> "exynos_dp.c"
>>>> - Take Archit suggest, create a separate folder for analogix code in
>>>> bridge/
>>>>
>>>> Changes in v3:
>>>> - Take Thierry Reding suggest, move exynos's video_timing code
>>>>     to analogix_dp-exynos platform driver, add get_modes method
>>>>     to struct analogix_dp_plat_data.
>>>> - Take Heiko suggest, rename some "samsung*" dts propery to "analogix*".
>>>>
>>>> Changes in v2:
>>>> - Take Jingoo Han suggest, remove new copyright
>>>> - Fix compiled failed dut to analogix_dp_device misspell

[.....]

>>>> -static int exynos_dp_bridge_attach(struct drm_bridge *bridge)
>>>> +static int analogix_dp_bridge_attach(struct drm_bridge *bridge)
>>>>    {
>>>> -    struct exynos_dp_device *dp = bridge->driver_private;
>>>> -    struct drm_encoder *encoder = &dp->encoder;
>>>> +    struct analogix_dp_device *dp = bridge->driver_private;
>>>> +    struct drm_encoder *encoder = dp->encoder;
>>>>        struct drm_connector *connector = &dp->connector;
>>>>        int ret;
>>>>    -    /* Pre-empt DP connector creation if there's a bridge */
>>>> -    if (dp->ptn_bridge) {
>>>> -        ret = exynos_drm_attach_lcd_bridge(dp, encoder);
>>>> -        if (!ret)
>>>> -            return 0;
>>>> +    if (!bridge->encoder) {
>>>> +        DRM_ERROR("Parent encoder object not found");
>>>> +        return -ENODEV;
>>>>        }
>>>>    +    encoder->bridge = bridge;
>>>> +
>>>>        connector->polled = DRM_CONNECTOR_POLL_HPD;
>>>>          ret = drm_connector_init(dp->drm_dev, connector,
>>>> -                 &exynos_dp_connector_funcs,
>>>> +                 &analogix_dp_connector_funcs,
>>>>                     DRM_MODE_CONNECTOR_eDP);
>>>>        if (ret) {
>>>>            DRM_ERROR("Failed to initialize connector with drm\n");
>>>>            return ret;
>>>>        }
>>>>    -    drm_connector_helper_add(connector,
>>>> &exynos_dp_connector_helper_funcs);
>>>> +    drm_connector_helper_add(connector,
>>>> +                 &analogix_dp_connector_helper_funcs);
>>>>        drm_connector_register(connector);
>>>>        drm_mode_connector_attach_encoder(connector, encoder);
>>>>    -    if (dp->panel)
>>>> -        ret = drm_panel_attach(dp->panel, &dp->connector);
>>>> +    if (dp->plat_data && dp->plat_data->panel) {
>>>> +        ret = drm_panel_attach(dp->plat_data->panel, &dp->connector);
>>>> +        if (ret) {
>>>> +            DRM_ERROR("Failed to attach panel\n");
>>>> +            return ret;
>>>> +        }
>>>> +    }
>>>> +
>>>> +    /*
>>>> +     * This should be the end of attach function, caused
>>>> +     * we should ensure dp bridge could attach first.
>>>> +     */
>>>> +     if (dp->plat_data && dp->plat_data->attach) {
>>>> +         ret = dp->plat_data->attach(dp->plat_data, bridge);
>>>> +         if (ret) {
>>>> +             DRM_ERROR("Failed at platform attch func\n");
>>> Two new error paths appeared here and above. Don't you have to
>>> cleanup something? I don't know, just wondering...
>> Hmm... I think both panel & platform_attch need ERROR remind when
>> it failed. But if it still need clean, I though it should clean the platform attch
>> error,
>> this is not relate to DRM directly, just analogix driver logic, so code would like,
>>
>> -    if (dp->panel)
>> -        ret = drm_panel_attach(dp->panel, &dp->connector);
>> +    if (dp->plat_data && dp->plat_data->panel) {
>> +        ret = drm_panel_attach(dp->plat_data->panel, &dp->connector);
>> +        if (ret) {
>> +            DRM_ERROR("Failed to attach panel\n");
>> +            return ret;
>> +        }
>> +    }
>>
>> +    /*
>> +     * This should be the end of attach function, caused
>> +     * we should ensure dp bridge could attach first.
>> +     */
>> +     if (dp->plat_data && dp->plat_data->attach) {
>> +         ret = dp->plat_data->attach(dp->plat_data, bridge);
>>
>>            return ret;
> I am lost... the code looks the same. What did you change?

I just remove the DRM_ERROR after dp->plat_data->attach(),
maybe I should paste the change that rebase on this patch,
here are they,

     /*
      * This should be the end of attach function, caused
      * we should ensure dp bridge could attach first.
      */
-     if (dp->plat_data && dp->plat_data->attach) {
+     if (dp->plat_data && dp->plat_data->attach)
            ret = dp->plat_data->attach(dp->plat_data, bridge);
-          if (ret) {
-              DRM_ERROR("Failed at platform attch func\n");
-              return ret;
-          }
-      }

-    return 0;
+   return ret;


If this haven't meet your comment, I maybe start to think that
your comment  "Two new error paths appeared here and above"
indicated that those two function is the same.
     "dp->plat_data->attach(dp->plat_data, bridge); "
     "drm_panel_attach(dp->plat_data->panel, &dp->connector); "

Thanks,
- Yakir
> Best regards,
> Krzysztof
>
>
>





More information about the Linux-rockchip mailing list