[PATCH] ARM: dts: Add ddc i2c reference to veyron

Doug Anderson dianders at chromium.org
Thu Sep 3 09:28:09 PDT 2015


On Thu, Sep 3, 2015 at 9:13 AM, Lucas Stach <l.stach at pengutronix.de> wrote:
>> 6. Once you start using the dw_hdmi's i2c block with the currently
>> posted patch against mainline (to do this you not only need the patch
>> but you need to remove the ddc-i2c-bus property, set the pinmux, and
>> disable i2c5) then you'll see a bonafide i2c bus exposed to Linux.  In
>> my case this stole i2c0 away from the builtin SoC I2C bus and caused
>> the SoC I2C bus to fail to probe.  Doh.
> This shouldn't happen. I don't know if the patches landed yet, but I
> know Wolfram (i2c maintainer) had patches to reserve the range of bus
> numbers that are fixed by alias nodes and don't hand out those numbers
> to adapters with a dynamic bus number allocation.
>> 7. I was trying to solve #6 by adding an "of_node" to the i2c bus
>> which allowed me to give it a (non-conflicting) bus ID.
> This should not be needed.

Ah.  It's very possible that the issue is due to the fact that I was
testing this on an old kernel (3.14) that's missing that feature.  OK,
if that's fixed then at least the actual bug (making i2c0 fail to
load) is not a problem.  It'd still be nice to be able to assign a bus
number to this bus just to make reading of the logs easier, but it's
not a functionality requirement.


More information about the Linux-rockchip mailing list