[PATCH v2 1/2] ARM: dts: rockchip: pull up cts lines on rk3288
dianders at chromium.org
Wed Sep 2 16:34:38 PDT 2015
On Wed, Sep 2, 2015 at 4:27 PM, Alexandru M Stan <amstan at chromium.org> wrote:
> The flow control lines from a user accessible UART are optional,
> the user might not have anything connected to those pins.
> In order to prevent random interrupts happening and noise affecting
> the cts pin should be pulled up.
> Note that the default state for that pin on the rk3288 is pulled up,
> so this patch merely restores them.
> This is similar to what we're already doing with the RX pin,
> so it should be safe. At worst it might be a slightly higher power usage
> (through ~50 kohms) when the cts is low.
> Suggested-by: Neil Hendin <nhendin at chromium.org>
> Signed-off-by: Alexandru M Stan <amstan at chromium.org>
> Changes in v2: None
Probably not entirely true. ;)
> arch/arm/boot/dts/rk3288.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
Looks good to me.
Reviewed-by: Douglas Anderson <dianders at chromium.org>
More information about the Linux-rockchip