[PATCH] ARM: dts: rk3288: pull up cts lines
Alexandru M Stan
amstan at chromium.org
Wed Sep 2 15:20:06 PDT 2015
The flow control lines from a user accessible UART are optional,
the user might not have anything connected to those pins.
In order to prevent random interrupts happening and noise affecting
that pin it should be pulled up.
Note that the default state for those pins on the rk3288 is pulled up,
so this patch merely restores them.
Suggested-by: Neil Hendin <nhendin at chromium.org>
Signed-off-by: Alexandru M Stan <amstan at chromium.org>
---
arch/arm/boot/dts/rk3288.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 906e938..a059367 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -1211,11 +1211,11 @@
};
uart0_cts: uart0-cts {
- rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
};
uart0_rts: uart0-rts {
- rockchip,pins = <4 19 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <4 19 RK_FUNC_1 &pcfg_pull_up>;
};
};
@@ -1226,11 +1226,11 @@
};
uart1_cts: uart1-cts {
- rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_up>;
};
uart1_rts: uart1-rts {
- rockchip,pins = <5 11 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <5 11 RK_FUNC_1 &pcfg_pull_up>;
};
};
@@ -1249,11 +1249,11 @@
};
uart3_cts: uart3-cts {
- rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_up>;
};
uart3_rts: uart3-rts {
- rockchip,pins = <7 10 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <7 10 RK_FUNC_1 &pcfg_pull_up>;
};
};
@@ -1264,11 +1264,11 @@
};
uart4_cts: uart4-cts {
- rockchip,pins = <5 14 3 &pcfg_pull_none>;
+ rockchip,pins = <5 14 3 &pcfg_pull_up>;
};
uart4_rts: uart4-rts {
- rockchip,pins = <5 15 3 &pcfg_pull_none>;
+ rockchip,pins = <5 15 3 &pcfg_pull_up>;
};
};
--
2.5.0.457.gab17608
More information about the Linux-rockchip
mailing list