[PATCH v4 08/16] drm: rockchip/dp: add rockchip platform dp driver
Yakir Yang
ykk at rock-chips.com
Tue Sep 1 18:52:18 PDT 2015
Hi Heiko,
在 09/02/2015 05:00 AM, Heiko Stuebner 写道:
> Hi Yakir,
>
> Am Dienstag, 1. September 2015, 14:01:28 schrieb Yakir Yang:
>> Rockchip have three clocks for dp controller, we leave pclk_edp
>> to analogix_dp driver control, and keep the sclk_edp_24m and
>> sclk_edp in platform driver.
>>
>> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
>> ---
>> Changes in v4:
>> - Remove some deprecated DT properties in rockchip dp document.
>>
>> Changes in v3:
>> - Take Thierry Reding and Heiko suggest, leave "sclk_edp_24m" to rockchip
>> dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp
>> core driver which name to "dp", and leave "pclk_edp" to rockchip dp
>> platform driver which name to "pclk".
>> - Take Heiko suggest, add devicetree binding document.
>> - Take Heiko suggest, remove "rockchip,panel" DT property, take use of
>> remote point to get panel node.
>> - Add the new function point analogix_dp_platdata.get_modes init.
>>
>> Changes in v2:
>> - Take Heiko suggest, get panel node with remote-endpoint method,
>> and create devicetree binding for driver.
>> - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
>> leave those clock to rockchip dp phy driver.
>>
>> .../bindings/video/analogix_dp-rockchip.txt | 74 ++++
>> drivers/gpu/drm/rockchip/Kconfig | 9 +
>> drivers/gpu/drm/rockchip/Makefile | 1 +
>> drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 389
>> +++++++++++++++++++++ 4 files changed, 473 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt create
>> mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>
>> diff --git
>> a/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
>> b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt new file
>> mode 100644
>> index 0000000..502483e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
>> @@ -0,0 +1,74 @@
>> +Rockchip RK3288 specific extensions to the Analogix Display Port
>> +================================
>> +
>> +Required properties:
>> +- compatible: "rockchip,rk3288-edp";
>> +
>> +- reg: physical base address of the controller and length
>> +
>> +- clocks: from common clock binding: handle to dp clock.
>> + of memory mapped region.
>> +
>> +- clock-names: from common clock binding:
>> + Required elements: "dp" "pclk"
>> +
>> +- resets: Must contain an entry for each entry in reset-names.
>> + See ../reset/reset.txt for details.
>> +
>> +- reset-names: Must include the name "dp"
>> +
>> +- rockchip,grf: this soc should set GRF regs, so need get grf here.
>> +
>> +- ports: contain a port node with endpoint definitions as defined in
>> + Documentation/devicetree/bindings/media/video-interfaces.txt.
>> +
>> +
>> +For the below properties, please refer to Analogix DP binding document:
>> + * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
>> +- phys (required)
>> +- phy-names (required)
>> +- hpd-gpios (optional)
>> +---------------------------------------------------------------------------
>> ---- +
>> +Example:
>> + dp-controller: dp at ff970000 {
>> + compatible = "rockchip,rk3288-dp";
>> + reg = <0xff970000 0x4000>;
>> + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
>> + clock-names = "dp", "pclk";
>> + phys = <&dp_phy>;
>> + phy-names = "dp";
>> +
>> + rockchip,grf = <&grf>;
>> + resets = <&cru 111>;
>> + reset-names = "dp";
>> +
>> + status = "disabled";
>> +
>> + ports {
> #address-cells = <1>;
> #size-cells = <0>;
Done,
>> + edp_in: port {
> edp_in: port at 0
> reg = <0>;
Done,
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + edp_in_vopb: endpoint at 0 {
>> + reg = <0>;
>> + remote-endpoint = <&vopb_out_edp>;
>> + };
>> + edp_in_vopl: endpoint at 1 {
>> + reg = <1>;
>> + remote-endpoint = <&vopl_out_edp>;
>> + };
>> + };
>> +
>> + edp_out: port at 1 {
>> + reg = <1>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + edp_out_panel: endpoint {
>> + reg = <0>;
>> + remote-endpoint = <&panel_in_edp>
>> + };
>> + };
>> + };
>> + };
>> +
>> diff --git a/drivers/gpu/drm/rockchip/Kconfig
>> b/drivers/gpu/drm/rockchip/Kconfig index 35215f6..c2ba945 100644
>> --- a/drivers/gpu/drm/rockchip/Kconfig
>> +++ b/drivers/gpu/drm/rockchip/Kconfig
>> @@ -25,3 +25,12 @@ config ROCKCHIP_DW_HDMI
>> for the Synopsys DesignWare HDMI driver. If you want to
>> enable HDMI on RK3288 based SoC, you should selet this
>> option.
>> +
>> +config ROCKCHIP_ANALOGIX_DP
>> + tristate "Rockchip specific extensions for Analogix DP driver"
>> + depends on DRM_ROCKCHIP
>> + select DRM_ANALOGIX_DP
>> + help
>> + This selects support for Rockchip SoC specific extensions
>> + for the Analogix Core DP driver. If you want to enable DP
>> + on RK3288 based SoC, you should selet this option.
>> diff --git a/drivers/gpu/drm/rockchip/Makefile
>> b/drivers/gpu/drm/rockchip/Makefile index f3d8a19..8ad01fb 100644
>> --- a/drivers/gpu/drm/rockchip/Makefile
>> +++ b/drivers/gpu/drm/rockchip/Makefile
>> @@ -6,5 +6,6 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o
>> rockchip_drm_fbdev.o \ rockchip_drm_gem.o
>>
>> obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
>> +obj-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
>>
>> obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o
>> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c new file mode 100644
>> index 0000000..cebff9e
>> --- /dev/null
>> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> @@ -0,0 +1,389 @@
>> +/*
>> + * Rockchip SoC DP (Display Port) interface driver.
>> + *
>> + * Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
>> + * Author: Andy Yan <andy.yan at rock-chips.com>
>> + * Yakir Yang <ykk at rock-chips.com>
>> + * Jeff Chen <jeff.chen at rock-chips.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + */
>> +#include <drm/drmP.h>
>> +#include <drm/drm_crtc_helper.h>
>> +#include <drm/drm_panel.h>
>> +#include <drm/drm_of.h>
>> +#include <drm/drm_dp_helper.h>
>> +
>> +#include <linux/component.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/of_graph.h>
>> +#include <linux/regmap.h>
>> +#include <linux/reset.h>
>> +#include <linux/clk.h>
>> +
>> +#include <video/of_videomode.h>
>> +#include <video/videomode.h>
>> +
>> +#include <drm/bridge/analogix_dp.h>
>> +
>> +#include "rockchip_drm_drv.h"
>> +#include "rockchip_drm_vop.h"
>> +
>> +#define encoder_to_dp(c) \
>> + container_of(c, struct rockchip_dp_device, encoder)
>> +
>> +#define plat_data_to_dp(pd) \
>> + container_of(pd, struct rockchip_dp_device, plat_data)
>> +
>> +/* dp grf register offset */
>> +#define GRF_GPIO7B_IOMUX 0x0070
>> +#define GPIO7B3_SEL_MASK (0x03 << 6)
>> +#define GPIO7B3_SEL_EDP_HOTPLUG BIT(7)
> please remove, see comment near pre_init
Okay,
>
>> +
>> +#define GRF_SOC_CON6 0x025c
>> +#define GRF_EDP_LCD_SEL_MASK BIT(5)
>> +#define GRF_EDP_SEL_VOP_LIT BIT(5)
>> +#define GRF_EDP_SEL_VOP_BIG 0
>> +
>> +struct rockchip_dp_device {
>> + struct drm_device *drm_dev;
>> + struct device *dev;
>> + struct drm_encoder encoder;
>> + struct drm_display_mode mode;
>> +
>> + struct clk *pclk;
>> + struct regmap *grf;
>> + struct reset_control *rst;
>> +
>> + struct analogix_dp_plat_data plat_data;
>> +};
>> +
>> +static int rockchip_dp_pre_init(struct rockchip_dp_device *dp)
>> +{
>> + u32 val;
>> + int ret;
>> +
>> + val = GPIO7B3_SEL_EDP_HOTPLUG | (GPIO7B3_SEL_MASK << 16);
>> + ret = regmap_write(dp->grf, GRF_GPIO7B_IOMUX, val);
> this is just a regular pinctrl setting. Please don't write onto other
> components registers. Use a regular pinctrl setting in the devicetree instead.
Okay,
Thanks,
- Yakir
>
>> + if (ret != 0) {
>> + dev_err(dp->dev, "Could not config GRF edp hpd: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + reset_control_assert(dp->rst);
>> + usleep_range(10, 20);
>> + reset_control_deassert(dp->rst);
>> +
>> + return 0;
>> +}
>
> Heiko
>
>
>
More information about the Linux-rockchip
mailing list