[PATCH v4 3/3] ARM: dts: rockchip: Add the OTP gpio pinctrl

Caesar Wang wxt at rock-chips.com
Fri Oct 23 04:25:28 PDT 2015


Add the "init" anf "sleep" pinctrl as the OTP gpio state.
We need the OTP pin is gpio state before resetting the TSADC controller,
since the tshut polarity will generate a high signal.

"init" pinctrl property is defined by Doug's Patch[0].

Patch[0]:
https://patchwork.kernel.org/patch/7454311/

Signed-off-by: Caesar Wang <wxt at rock-chips.com>
Reviewed-by: Douglas Anderson <dianders at chromium.org>
---

Changes in v4: None
Changes in v3:
  - Add the "sleep" pinctrl as the gpio state in PATCH[3/3]

Changes in v2:
  - Add some commits for more obvious in PATCH[2/2]

Changes in v1:
  - As the Doug comments, drop the thermal driver patchs since
    we can with pinctrl changing to work.
  - As the Doug's patch to add the 'init' property.

 arch/arm/boot/dts/rk3288.dtsi | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 906e938..13ff09a 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -447,8 +447,10 @@
 		clock-names = "tsadc", "apb_pclk";
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
-		pinctrl-names = "default";
-		pinctrl-0 = <&otp_out>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_gpio>;
 		#thermal-sensor-cells = <1>;
 		rockchip,hw-tshut-temp = <95000>;
 		status = "disabled";
@@ -1273,6 +1275,10 @@
 		};
 
 		tsadc {
+			otp_gpio: otp-gpio {
+				rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
 			otp_out: otp-out {
 				rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
 			};
-- 
1.9.1




More information about the Linux-rockchip mailing list