[PATCH v6 11/17] Documentation: phy: add document for rockchip dp phy

[Kishon Vijay Abraham I]

Hi,

On Saturday 10 October 2015 09:28 PM, Yakir Yang wrote:
> This phy driver is binded with the Rockchip DisplayPort
> driver, here are the brief properties:
> 	edp_phy: edp-phy at ff770274 {
> 		compatible = "rockchip,rk3288-dp-phy";
> 		rockchip,grf = <&grf>;
> 		clocks = <&cru SCLK_EDP_24M>;
> 		clock-names = "24m";
> 		#phy-cells = <0>;
> 	};

The commit message can simply be "Add dt binding documentation for
rockchip display port PHY".

Thanks
Kishon

> 
> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
> ---
> Changes in v6: None
> Changes in v5:
> - Split binding doc's from driver changes. (Rob)
> - Update the rockchip,grf explain in document, and correct the clock required
>   elemets in document. (Rob & Heiko)
> 
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  .../devicetree/bindings/phy/rockchip-dp-phy.txt    | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
> 
> diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
> new file mode 100644
> index 0000000..505194e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
> @@ -0,0 +1,22 @@
> +Rockchip Soc Seroes Display Port PHY
> +------------------------------------
> +
> +Required properties:
> +- compatible : should be one of the following supported values:
> +	 - "rockchip.rk3288-dp-phy"
> +- clocks: from common clock binding: handle to dp clock.
> +	of memory mapped region.
> +- clock-names: from common clock binding:
> +	Required elements: "24m"
> +- rockchip,grf: phandle to the syscon managing the "general register files"
> +- #phy-cells : from the generic PHY bindings, must be 0;
> +
> +Example:
> +
> +edp_phy: edp-phy at ff770274 {
> +	compatible = "rockchip,rk3288-dp-phy";
> +	rockchip,grf = <&grf>;
> +	clocks = <&cru SCLK_EDP_24M>;
> +	clock-names = "24m";
> +	#phy-cells = <0>;
> +};
>