[PATCH v2 5/8] mmc: dw_mmc-rockchip: dt-binding: Add tuning related things

[Jaehoon Chung]

Hi, Heiko.

Acked-by: Jaehoon Chung <jh80.chung at samsung.com>

Best Regards,
Jaehoon Chung


On 09/30/2015 11:07 PM, Heiko Stuebner wrote:
> From: Alexandru M Stan <amstan at chromium.org>
> 
> Add ciu_drive, ciu_sample clocks and default-sample-phase. This will later
> be used by tuning code.
> 
> We do not touch ciu_drive (and by extension define default-drive-phase).
> Drive phase is mostly used to define minimum hold times, while one could
> write some code to determine what phase meets the minimum hold time
> (ex 10 degrees) this will not work with the current clock phase framework
> (which floors angles, so we'll get 0 deg, and there's no way to know what
> resolution the floors happen at). We assume that the default drive angles
> set by the hardware are good enough.
> 
> Signed-off-by: Alexandru M Stan <amstan at chromium.org>
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
> ---
>  Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
> index c327c2d..3dc13b6 100644
> --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
> +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
> @@ -14,6 +14,19 @@ Required Properties:
>  							before RK3288
>  	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
>  
> +Optional Properties:
> +* clocks: from common clock binding: if ciu_drive and ciu_sample are
> +  specified in clock-names, should contain handles to these clocks.
> +
> +* clock-names: Apart from the clock-names described in synopsys-dw-mshc.txt
> +  two more clocks "ciu-drive" and "ciu-sample" are supported. They are used
> +  to control the clock phases, "ciu-sample" is required for tuning high-
> +  speed modes.
> +
> +* rockchip,default-sample-phase: The default phase to set ciu_sample at
> +  probing, low speeds or in case where all phases work at tuning time.
> +  If not specified 0 deg will be used.
> +
>  Example:
>  
>  	rkdwmmc0 at 12200000 {
>